sunxi: Add defconfig and dts for the Polaroid MID2809PXE4 tablet

[u-boot] / board / sunxi / Kconfig

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index fd6668fea2d040da27da3befff6c5bc84c1f4dc6..5e9d3af336e1b7fea403cd30642d3748a30dc7e9 100644 (file)
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -68,6 +68,21 @@ config MACH_SUN8I_A33
        select SUPPORT_SPL
        select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
+config MACH_SUN8I_H3
+       bool "sun8i (Allwinner H3)"
+       select CPU_V7
+       select CPU_V7_HAS_NONSEC
+       select CPU_V7_HAS_VIRT
+       select SUNXI_GEN_SUN6I
+       select SUPPORT_SPL
+       select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN8I_A83T
+       bool "sun8i (Allwinner A83T)"
+       select CPU_V7
+       select SUNXI_GEN_SUN6I
+       select SUPPORT_SPL
+
 config MACH_SUN9I
        bool "sun9i (Allwinner A80)"
        select CPU_V7
@@ -78,8 +93,14 @@ endchoice
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
 config MACH_SUN8I
        bool
-       default y if MACH_SUN8I_A23 || MACH_SUN8I_A33
+       default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
 
+config DRAM_TYPE
+       int "sunxi dram type"
+       depends on MACH_SUN8I_A83T
+       default 3
+       ---help---
+       Set the dram type, 3: DDR3, 7: LPDDR3
 
 config DRAM_CLK
        int "sunxi dram clock speed"
@@ -227,6 +248,10 @@ config OLD_SUNXI_KERNEL_COMPAT
        Set this to enable various workarounds for old kernels, this results in
        sub-optimal settings for newer kernels, only enable if needed.
 
+config MMC
+       depends on !UART0_PORT_F
+       default y if ARCH_SUNXI
+
 config MMC0_CD_PIN
        string "Card detect pin for mmc0"
        default ""
@@ -347,6 +372,15 @@ config I2C3_ENABLE
        See I2C0_ENABLE help text.
 endif
 
+if SUNXI_GEN_SUN6I
+config R_I2C_ENABLE
+       bool "Enable the PRCM I2C/TWI controller"
+       # This is used for the pmic on H3
+       default y if SY8106A_POWER
+       ---help---
+       Set this to y to enable the I2C controller which is part of the PRCM.
+endif
+
 if MACH_SUN7I
 config I2C4_ENABLE
        bool "Enable I2C/TWI controller 4"
@@ -363,6 +397,7 @@ config AXP_GPIO
 
 config VIDEO
        boolean "Enable graphical uboot console on HDMI, LCD or VGA"
+       depends on !MACH_SUN8I_A83T
        default y
        ---help---
        Say Y here to add support for using a cfb console on the HDMI, LCD
@@ -425,6 +460,7 @@ config VIDEO_LCD_MODE
        LCD panel timing details string, leave empty if there is no LCD panel.
        This is in drivers/video/videomodes.c: video_get_params() format, e.g.
        x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
+       Also see: http://linux-sunxi.org/LCD
 
 config VIDEO_LCD_DCLK_PHASE
        int "LCD panel display clock phase"
@@ -561,4 +597,8 @@ config GMAC_TX_DELAY
        ---help---
        Set the GMAC Transmit Clock Delay Chain value.
 
+config SPL_STACK_R_ADDR
+       default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I
+       default 0x2fe00000 if MACH_SUN9I
+
 endif