Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

[u-boot] / board / sunxi / Kconfig

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index a170c561aab10344474c4fd7921cd302b4695b25..9cf54e51ac9d41728955720ba4c64dbae72c7122 100644 (file)
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -223,6 +223,14 @@ config USB0_VBUS_PIN
        Set the Vbus enable pin for usb0 (otg). This takes a string in the
        format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config USB0_VBUS_DET
+       string "Vbus detect pin for usb0 (otg)"
+       depends on USB_MUSB_SUNXI
+       default ""
+       ---help---
+       Set the Vbus detect pin for usb0 (otg). This takes a string in the
+       format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 config USB1_VBUS_PIN
        string "Vbus enable pin for usb1 (ehci0)"
        default "PH6" if MACH_SUN4I || MACH_SUN7I
@@ -344,6 +352,30 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
        ---help---
        Set this if the backlight pwm output is active low.
 
+config VIDEO_LCD_PANEL_I2C
+       bool "LCD panel needs to be configured via i2c"
+       depends on VIDEO
+       default m
+       ---help---
+       Say y here if the LCD panel needs to be configured via i2c. This
+       will add a bitbang i2c controller using gpios to talk to the LCD.
+
+config VIDEO_LCD_PANEL_I2C_SDA
+       string "LCD panel i2c interface SDA pin"
+       depends on VIDEO_LCD_PANEL_I2C
+       default "PG12"
+       ---help---
+       Set the SDA pin for the LCD i2c interface. This takes a string in the
+       format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_PANEL_I2C_SCL
+       string "LCD panel i2c interface SCL pin"
+       depends on VIDEO_LCD_PANEL_I2C
+       default "PG10"
+       ---help---
+       Set the SCL pin for the LCD i2c interface. This takes a string in the
+       format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 
 # Note only one of these may be selected at a time! But hidden choices are
 # not supported by Kconfig
@@ -382,6 +414,14 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
        ---help---
        7.85" 1024x768 Hitachi tx18d42vm LCD panel support
 
+config VIDEO_LCD_TL059WV5C0
+       bool "tl059wv5c0 LCD panel"
+       select VIDEO_LCD_PANEL_I2C
+       select VIDEO_LCD_IF_PARALLEL
+       ---help---
+       6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and
+       Aigo M60/M608/M606 tablets.
+
 endchoice