* Add start-up delay to make sure power has stabilized before

[u-boot] / board / sx1 / platform.S

diff --git a/board/sx1/platform.S b/board/sx1/platform.S
index 304812805a77a4c26c9a8b6645c5be1cf98bc8eb..bd54df18c44c649ba2244a69682e4c462a10d9c5 100644 (file)
--- a/board/sx1/platform.S
+++ b/board/sx1/platform.S
@@ -118,30 +118,21 @@ platformsetup:
        str r1, [r0]        /* EMIFS GlB Configuration. (value 0x12 most likely) */
 
        ldr r0, _GPIO_PIN_CONTROL_REG
-       ldrh r1,[r0]
+       mov r1,#0
        orr r1, r1, #0x0001 /* M_PCM_SYNC */
        orr r1, r1, #0x4000 /* IPC_ACTIVE */
-       orr r1, r1, #0x0002 /* A_IRDA_OFF */
-       orr r1, r1, #0x0800 /* A_SWITCH   */
-       orr r1, r1, #0x8000 /* A_USB_ON   */
        strh r1,[r0]
 
        ldr r0, _GPIO_DIR_CONTROL_REG
-       ldrh r1,[r0]
+       mov r1,#0
        bic r1, r1, #0x0001 /* M_PCM_SYNC */
        bic r1, r1, #0x4000 /* IPC_ACTIVE */
-       bic r1, r1, #0x0002 /* A_IRDA_OFF */
-       bic r1, r1, #0x0800 /* A_SWITCH   */
-       bic r1, r1, #0x8000 /* A_USB_ON   */
        strh r1,[r0]
 
        ldr r0, _GPIO_DATA_OUTPUT_REG
-       ldrh r1,[r0]
+       mov r1,#0
        bic r1, r1, #0x0001 /* M_PCM_SYNC */
        orr r1, r1, #0x4000 /* IPC_ACTIVE */
-       orr r1, r1, #0x0002 /* A_IRDA_OFF */
-       bic r1, r1, #0x0800 /* A_SWITCH   */
-       bic r1, r1, #0x8000 /* A_USB_ON   */
        strh r1,[r0]
 
        /* Setup some clock domains */