*
* Copyright (C) 2009 TechNexion Ltd.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
+#include <malloc.h>
#include <fpga.h>
+#include <video_fb.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_gpio.h>
#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/dss.h>
+#include <asm/arch/clock.h>
#include <i2c.h>
#include <spartan3.h>
#include <asm/gpio.h>
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
#include <usb.h>
#include <asm/ehci-omap.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
+#define BUZZER 140
+#define SPEAKER 141
+#define USB1_PWR 127
+#define USB2_PWR 149
+
#ifndef CONFIG_FPGA
#error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
#endif
#define FPGA_INIT 119
#define FPGA_DONE 154
+#define LCD_PWR 138
+#define LCD_PON_PIN 139
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+static struct {
+ u32 xres;
+ u32 yres;
+} panel_resolution[] = {
+ { 480, 272 },
+ { 800, 480 }
+};
+
+static struct panel_config lcd_cfg[] = {
+ {
+ .timing_h = PANEL_TIMING_H(40, 5, 2),
+ .timing_v = PANEL_TIMING_V(8, 8, 2),
+ .pol_freq = 0x00003000, /* Pol Freq */
+ .divisor = 0x00010033, /* 9 Mhz Pixel Clock */
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = 0,
+ .gfx_format = GFXFORMAT_RGB24_UNPACKED,
+ },
+ {
+ .timing_h = PANEL_TIMING_H(20, 192, 4),
+ .timing_v = PANEL_TIMING_V(2, 20, 10),
+ .pol_freq = 0x00004000, /* Pol Freq */
+ .divisor = 0x0001000E, /* 36Mhz Pixel Clock */
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = 0,
+ .gfx_format = GFXFORMAT_RGB24_UNPACKED,
+ }
+};
+#endif
+
/* Timing definitions for FPGA */
static const u32 gpmc_fpga[] = {
FPGA_GPMC_CONFIG1,
FPGA_GPMC_CONFIG6,
};
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
};
-int ehci_hcd_init(void)
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
- return omap_ehci_hcd_init(&usbhs_bdata);
+ return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
}
-int ehci_hcd_stop(void)
+int ehci_hcd_stop(int index)
{
return omap_ehci_hcd_stop();
}
{
debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
- fpga_reset(TRUE);
+ fpga_reset(true);
udelay(100);
- fpga_reset(FALSE);
+ fpga_reset(false);
return 0;
}
return assert_clk;
}
-Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
+xilinx_spartan3_slave_serial_fns mt_ventoux_fpga_fns = {
fpga_pre_config_fn,
fpga_pgm_fn,
fpga_clk_fn,
fpga_post_config_fn,
};
-Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
+xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
(void *)&mt_ventoux_fpga_fns, 0);
/* Initialize the FPGA */
mt_ventoux_init_fpga();
+ /* GPIO_140: speaker #mute */
+ MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4))
+ /* GPIO_141: Buzz Hi */
+ MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4))
+
+ /* Turning off the buzzer */
+ gpio_request(BUZZER, "BUZZER_MUTE");
+ gpio_request(SPEAKER, "SPEAKER");
+ gpio_direction_output(BUZZER, 0);
+ gpio_direction_output(SPEAKER, 0);
+
+ /* Activate USB power */
+ gpio_request(USB1_PWR, "USB1_PWR");
+ gpio_request(USB2_PWR, "USB2_PWR");
+ gpio_direction_output(USB1_PWR, 1);
+ gpio_direction_output(USB2_PWR, 1);
+
+ return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
+int misc_init_r(void)
+{
+ char *eth_addr;
+ struct tam3517_module_info info;
+ int ret;
+
+ TAM3517_READ_EEPROM(&info, ret);
+ omap_die_id_display();
+
+ if (ret)
+ return 0;
+ eth_addr = getenv("ethaddr");
+ if (!eth_addr)
+ TAM3517_READ_MAC_FROM_EEPROM(&info);
+
+ TAM3517_PRINT_SOM_INFO(&info);
return 0;
}
+#endif
/*
* Routine: set_muxconf_regs
return 0;
}
-#if defined(CONFIG_OMAP_HSMMC) && \
+#if defined(CONFIG_MMC_OMAP_HS) && \
!defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, -1);
+}
+#endif
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+int board_video_init(void)
+{
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ struct panel_config *panel = &lcd_cfg[0];
+ char *s;
+ u32 index = 0;
+
+ void *fb;
+
+ fb = (void *)0x88000000;
+
+ s = getenv("panel");
+ if (s) {
+ index = simple_strtoul(s, NULL, 10);
+ if (index < ARRAY_SIZE(lcd_cfg))
+ panel = &lcd_cfg[index];
+ else
+ return 0;
+ }
+
+ panel->frame_buffer = fb;
+ printf("Panel: %dx%d\n", panel_resolution[index].xres,
+ panel_resolution[index].yres);
+ panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
+ (panel_resolution[index].xres - 1);
+
+ gpio_request(LCD_PWR, "LCD Power");
+ gpio_request(LCD_PON_PIN, "LCD Pon");
+ gpio_direction_output(LCD_PWR, 0);
+ gpio_direction_output(LCD_PON_PIN, 1);
+
+
+ setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+ setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+
+ omap3_dss_panel_config(panel);
+ omap3_dss_enable();
+
+ return 0;
}
#endif