Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

[u-boot] / board / teejet / mt_ventoux / mt_ventoux.c

diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index b8ad4471f52105c120487745f4c4dfe79e3a33bf..8347cf9ce942c86870cfe02905dab1f74f63dd64 100644 (file)
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -45,6 +45,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define BUZZER         140
 #define SPEAKER                141
+#define USB1_PWR       127
+#define USB2_PWR       149
 
 #ifndef CONFIG_FPGA
 #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
@@ -71,14 +73,15 @@ static struct {
 
 static struct panel_config lcd_cfg[] = {
        {
-       .timing_h       = PANEL_TIMING_H(4, 8, 41),
-       .timing_v       = PANEL_TIMING_V(2, 4, 10),
-       .pol_freq       = 0x00000000, /* Pol Freq */
-       .divisor        = 0x0001000d, /* 33Mhz Pixel Clock */
+       .timing_h       = PANEL_TIMING_H(40, 5, 2),
+       .timing_v       = PANEL_TIMING_V(8, 8, 2),
+       .pol_freq       = 0x00003000, /* Pol Freq */
+       .divisor        = 0x00010033, /* 9 Mhz Pixel Clock */
        .panel_type     = 0x01, /* TFT */
        .data_lines     = 0x03, /* 24 Bit RGB */
        .load_mode      = 0x02, /* Frame Mode */
        .panel_color    = 0,
+       .gfx_format     = GFXFORMAT_RGB24_UNPACKED,
        },
        {
        .timing_h       = PANEL_TIMING_H(20, 192, 4),
@@ -89,6 +92,7 @@ static struct panel_config lcd_cfg[] = {
        .data_lines     = 0x03, /* 24 Bit RGB */
        .load_mode      = 0x02, /* Frame Mode */
        .panel_color    = 0,
+       .gfx_format     = GFXFORMAT_RGB24_UNPACKED,
        }
 };
 #endif
@@ -110,12 +114,12 @@ static struct omap_usbhs_board_data usbhs_bdata = {
        .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 };
 
-int ehci_hcd_init(void)
+int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
-       return omap_ehci_hcd_init(&usbhs_bdata);
+       return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
 }
 
-int ehci_hcd_stop(void)
+int ehci_hcd_stop(int index)
 {
        return omap_ehci_hcd_stop();
 }
@@ -175,9 +179,9 @@ int fpga_post_config_fn(int cookie)
 {
        debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
 
-       fpga_reset(TRUE);
+       fpga_reset(true);
        udelay(100);
-       fpga_reset(FALSE);
+       fpga_reset(false);
 
        return 0;
 }
@@ -247,24 +251,35 @@ int board_init(void)
        gpio_direction_output(BUZZER, 0);
        gpio_direction_output(SPEAKER, 0);
 
+       /* Activate USB power */
+       gpio_request(USB1_PWR, "USB1_PWR");
+       gpio_request(USB2_PWR, "USB2_PWR");
+       gpio_direction_output(USB1_PWR, 1);
+       gpio_direction_output(USB2_PWR, 1);
+
        return 0;
 }
 
+#ifndef CONFIG_SPL_BUILD
 int misc_init_r(void)
 {
        char *eth_addr;
+       struct tam3517_module_info info;
+       int ret;
 
+       TAM3517_READ_EEPROM(&info, ret);
        dieid_num_r();
 
-       eth_addr = getenv("ethaddr");
-       if (eth_addr)
+       if (ret)
                return 0;
+       eth_addr = getenv("ethaddr");
+       if (!eth_addr)
+               TAM3517_READ_MAC_FROM_EEPROM(&info);
 
-#ifndef CONFIG_SPL_BUILD
-       TAM3517_READ_MAC_FROM_EEPROM;
-#endif
+       TAM3517_PRINT_SOM_INFO(&info);
        return 0;
 }
+#endif
 
 /*
  * Routine: set_muxconf_regs
@@ -291,7 +306,7 @@ int board_eth_init(bd_t *bis)
        !defined(CONFIG_SPL_BUILD)
 int board_mmc_init(bd_t *bis)
 {
-       return omap_mmc_init(0, 0, 0);
+       return omap_mmc_init(0, 0, 0, -1, -1);
 }
 #endif