- AM335x EVM SK
- Beaglebone White
- Beaglebone Black
-'
+
+Customization
+=============
+
+Given that all of the above boards are reference platforms (and the
+Beaglebone platforms are OSHA), it is likely that this platform code and
+configuration will be used as the basis of a custom platform. It is
+worth noting that aside from things such as NAND or MMC only being
+required if a custom platform makes use of these blocks, the following
+are required, depending on design:
+
+- GPIO is only required if DDR3 power is controlled in a way similar to
+ EVM SK
+- SPI is only required for SPI flash, or exposing the SPI bus.
+
+The following blocks are required:
+- I2C, to talk with the PMIC and ensure that we do not run afoul of
+ errata 1.0.24.
+
+When removing options as part of customization,
+CONFIG_EXTRA_ENV_SETTINGS will need additional care to update for your
+needs and to remove no longer relevant options as in some cases we
+define additional text blocks (such as for NAND or DFU strings). Also
+note that all of the SPL options are grouped together, rather than with
+the IP blocks, so both areas will need their choices updated to reflect
+the custom design.
+
NAND
====
U-Boot # load mmc 0 ${loadaddr} uImage
U-Boot # nand write ${loadaddr} kernel 500000
+NOR
+===
+
+The Beaglebone White can be equiped with a "memory cape" that in turn can
+have a NOR module plugged into it. In this case it is then possible to
+program and boot from NOR. Note that due to how U-Boot is architectured we
+must build a specific version of U-Boot that knows we have NOR flash. This
+build is named 'am335x_evm_nor'. Further, we have a 'am335x_evm_norboot'
+build that will assume that the environment is on NOR rather than NAND. In
+the following example we assume that and SD card has been populated with
+MLO and u-boot.img from a 'am335x_evm_nor' build and also contains the
+'u-boot.bin' from a 'am335x_evm_norboot' build. When booting from NOR, a
+binary must be written to the start of NOR, with no header or similar
+prepended. In the following example we use a size of 512KiB (0x80000)
+as that is how much space we set aside before the environment, as per
+the config file.
+
+U-Boot # mmc rescan
+U-Boot # load mmc 0 ${loadaddr} u-boot.bin
+U-Boot # protect off 08000000 +80000
+U-Boot # erase 08000000 +80000
+U-Boot # cp.b ${loadaddr} 08000000 ${filesize}
+
Falcon Mode
===========