*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
-static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
-
-/* MII mode defines */
-#define MII_MODE_ENABLE 0x0
-#define RGMII_MODE_ENABLE 0x3A
-
/* GPIO that controls power to DDR on EVM-SK */
#define GPIO_DDR_VTT_EN 7
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-static struct am335x_baseboard_id __attribute__((section (".data"))) header;
-
-static inline int board_is_bone(void)
-{
- return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
-}
-
-static inline int board_is_bone_lt(void)
-{
- return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
-}
-
-static inline int board_is_evm_sk(void)
-{
- return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
-}
-
-static inline int board_is_idk(void)
-{
- return !strncmp(header.config, "SKU#02", 6);
-}
-
-static int __maybe_unused board_is_gp_evm(void)
-{
- return !strncmp("A33515BB", header.name, 8);
-}
-
-int board_is_evm_15_or_later(void)
-{
- return (!strncmp("A33515BB", header.name, 8) &&
- strncmp("1.5", header.version, 3) <= 0);
-}
-
/*
* Read header information from EEPROM into global structure.
*/
-static int read_eeprom(void)
+static int read_eeprom(struct am335x_baseboard_id *header)
{
/* Check if baseboard eeprom is available */
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
}
/* read the eeprom using i2c */
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
- sizeof(header))) {
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)header,
+ sizeof(struct am335x_baseboard_id))) {
puts("Could not read the EEPROM; something fundamentally"
" wrong on the I2C bus.\n");
return -EIO;
}
- if (header.magic != 0xEE3355AA) {
+ if (header->magic != 0xEE3355AA) {
/*
* read the eeprom using i2c again,
* but use only a 1 byte address
*/
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
- (uchar *)&header, sizeof(header))) {
+ if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
+ sizeof(struct am335x_baseboard_id))) {
puts("Could not read the EEPROM; something "
"fundamentally wrong on the I2C bus.\n");
return -EIO;
}
- if (header.magic != 0xEE3355AA) {
+ if (header->magic != 0xEE3355AA) {
printf("Incorrect magic number (0x%x) in EEPROM\n",
- header.magic);
+ header->magic);
return -EINVAL;
}
}
return 0;
}
-/* UART Defines */
-#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
static const struct ddr_data ddr2_data = {
.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
(MT47H128M16RT25E_RD_DQS<<20) |
.emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY |
PHY_EN_DYN_PWRDN,
};
-#endif
-/*
- * early system init of muxing and clocks.
- */
-void s_init(void)
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
{
- /* WDT1 is already running when the bootloader gets control
- * Disable it to avoid "random" resets
- */
- writel(0xAAAA, &wdtimer->wdtwspr);
- while (readl(&wdtimer->wdtwwps) != 0x0)
- ;
- writel(0x5555, &wdtimer->wdtwspr);
- while (readl(&wdtimer->wdtwwps) != 0x0)
- ;
+ /* break into full u-boot on 'c' */
+ return (serial_tstc() && serial_getc() == 'c');
+}
+#endif
-#ifdef CONFIG_SPL_BUILD
- /* Setup the PLLs and the clocks for the peripherals */
- pll_init();
+#define OSC (V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {
+ 266, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_ddr_evm_sk = {
+ 303, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_ddr_bone_black = {
+ 400, OSC-1, 1, -1, -1, -1, -1};
- /* Enable RTC32K clock */
- rtc32k_enable();
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ struct am335x_baseboard_id header;
- /* UART softreset */
- u32 regVal;
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
+ if (board_is_evm_sk(&header))
+ return &dpll_ddr_evm_sk;
+ else if (board_is_bone_lt(&header))
+ return &dpll_ddr_bone_black;
+ else if (board_is_evm_15_or_later(&header))
+ return &dpll_ddr_evm_sk;
+ else
+ return &dpll_ddr;
+}
+
+void set_uart_mux_conf(void)
+{
#ifdef CONFIG_SERIAL1
enable_uart0_pin_mux();
#endif /* CONFIG_SERIAL1 */
#ifdef CONFIG_SERIAL6
enable_uart5_pin_mux();
#endif /* CONFIG_SERIAL6 */
+}
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_RESET;
- writel(regVal, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
+void set_mux_conf_regs(void)
+{
+ __maybe_unused struct am335x_baseboard_id header;
- /* Disable smart idle */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, &uart_base->uartsyscfg);
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
- gd = &gdata;
+ enable_board_pin_mux(&header);
+}
- preloader_console_init();
+void sdram_init(void)
+{
+ __maybe_unused struct am335x_baseboard_id header;
- /* Initalize the board header */
- enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- if (read_eeprom() < 0)
+ if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
- enable_board_pin_mux(&header);
- if (board_is_evm_sk()) {
+ if (board_is_evm_sk(&header)) {
/*
* EVM SK 1.2A and later use gpio0_7 to enable DDR3.
* This is safe enough to do on older revs.
gpio_direction_output(GPIO_DDR_VTT_EN, 1);
}
- if (board_is_evm_sk())
+ if (board_is_evm_sk(&header))
config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
- else if (board_is_bone_lt())
- config_ddr(303, MT41K256M16HA125E_IOCTRL_VALUE,
+ else if (board_is_bone_lt(&header))
+ config_ddr(400, MT41K256M16HA125E_IOCTRL_VALUE,
&ddr3_beagleblack_data,
&ddr3_beagleblack_cmd_ctrl_data,
&ddr3_beagleblack_emif_reg_data, 0);
- else if (board_is_evm_15_or_later())
+ else if (board_is_evm_15_or_later(&header))
config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data,
&ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0);
else
config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data,
&ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
-#endif
}
+#endif
/*
* Basic board specific setup. Pinmux has been handled already.
*/
int board_init(void)
{
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- if (read_eeprom() < 0)
- puts("Could not get board ID.\n");
+#ifdef CONFIG_NOR
+ const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
+ STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4,
+ STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 };
+#endif
- gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
+#ifdef CONFIG_NOR
+ /* Reconfigure CS0 for NOR instead of NAND. */
+ enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0],
+ CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M);
+#endif
+
return 0;
}
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
char safe_string[HDR_NAME_LEN + 1];
+ struct am335x_baseboard_id header;
+
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
/* Now set variables based on the header. */
strncpy(safe_string, (char *)header.name, sizeof(header.name));
.ale_entries = 1024,
.host_port_reg_ofs = 0x108,
.hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
.mac_control = (1 << 5),
.control = cpsw_control,
.host_port_num = 0,
int rv, n = 0;
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
+ __maybe_unused struct am335x_baseboard_id header;
/* try reading mac address from efuse */
mac_lo = readl(&cdev->macid0l);
eth_setenv_enetaddr("ethaddr", mac_addr);
}
- if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
+#ifdef CONFIG_DRIVER_TI_CPSW
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
+
+ if (board_is_bone(&header) || board_is_bone_lt(&header) ||
+ board_is_idk(&header)) {
writel(MII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
PHY_INTERFACE_MODE_MII;
} else {
- writel(RGMII_MODE_ENABLE, &cdev->miisel);
+ writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
PHY_INTERFACE_MODE_RGMII;
}
printf("Error %d registering CPSW switch\n", rv);
else
n += rv;
+#endif
/*
*
#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
#define AR8051_RGMII_TX_CLK_DLY 0x100
- if (board_is_evm_sk() || board_is_gp_evm()) {
+ if (board_is_evm_sk(&header) || board_is_gp_evm(&header)) {
const char *devname;
devname = miiphy_get_current_dev();