net: Move enetaddr env access code to env config instead of net config

[u-boot] / board / ti / am43xx / board.c

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index f633e2f85dffc00696eb59b908b215d4347351ce..0431cd46067004738c6b0aac96473ebcc3ffb796 100644 (file)
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -9,6 +9,7 @@
  */
 
 #include <common.h>
+#include <environment.h>
 #include <i2c.h>
 #include <linux/errno.h>
 #include <spl.h>
@@ -20,6 +21,7 @@
 #include <asm/arch/ddr_defs.h>
 #include <asm/arch/gpio.h>
 #include <asm/emif.h>
+#include <asm/omap_common.h>
 #include "../common/board_detect.h"
 #include "board.h"
 #include <power/pmic.h>
@@ -42,7 +44,8 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #ifdef CONFIG_TI_I2C_BOARD_DETECT
 void do_board_detect(void)
 {
-       if (ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR))
+       if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
+                                CONFIG_EEPROM_CHIP_ADDRESS))
                printf("ti_i2c_eeprom_init failed\n");
 }
 #endif
@@ -420,6 +423,13 @@ void scale_vcores_generic(u32 m)
                printf("%s failure\n", __func__);
                return;
        }
+
+       /* Set DCDC3 (DDR) voltage */
+       if (tps65218_voltage_update(TPS65218_DCDC3,
+           TPS65218_DCDC3_VOLT_SEL_1350MV)) {
+               printf("%s failure\n", __func__);
+               return;
+       }
 }
 
 void scale_vcores_idk(u32 m)
@@ -511,6 +521,62 @@ static void enable_vtt_regulator(void)
        writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
 }
 
+enum {
+       RTC_BOARD_EPOS = 1,
+       RTC_BOARD_EVM14,
+       RTC_BOARD_EVM12,
+       RTC_BOARD_GPEVM,
+       RTC_BOARD_SK,
+};
+
+/*
+ * In the rtc_only+DRR in self-refresh boot path we have the board type info
+ * in the rtc scratch pad register hence we bypass the costly i2c reads to
+ * eeprom and directly programthe board name string
+ */
+void rtc_only_update_board_type(u32 btype)
+{
+       const char *name = "";
+       const char *rev = "1.0";
+
+       switch (btype) {
+       case RTC_BOARD_EPOS:
+               name = "AM43EPOS";
+               break;
+       case RTC_BOARD_EVM14:
+               name = "AM43__GP";
+               rev = "1.4";
+               break;
+       case RTC_BOARD_EVM12:
+               name = "AM43__GP";
+               rev = "1.2";
+               break;
+       case RTC_BOARD_GPEVM:
+               name = "AM43__GP";
+               break;
+       case RTC_BOARD_SK:
+               name = "AM43__SK";
+               break;
+       }
+       ti_i2c_eeprom_am_set(name, rev);
+}
+
+u32 rtc_only_get_board_type(void)
+{
+       if (board_is_eposevm())
+               return RTC_BOARD_EPOS;
+       else if (board_is_evm_14_or_later())
+               return RTC_BOARD_EVM14;
+       else if (board_is_evm_12_or_later())
+               return RTC_BOARD_EVM12;
+       else if (board_is_gpevm())
+               return RTC_BOARD_GPEVM;
+       else if (board_is_sk())
+               return RTC_BOARD_SK;
+
+       return 0;
+}
+
 void sdram_init(void)
 {
        /*
@@ -571,6 +637,11 @@ int board_init(void)
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
        gpmc_init();
 
+       /*
+        * Call this to initialize *ctrl again
+        */
+       hw_data_init();
+
        /* Clear all important bits for DSS errata that may need to be tweaked*/
        mreqprio_0 = readl(&cdev->mreqprio_0) & MREQPRIO_0_SAB_INIT1_MASK &
                           MREQPRIO_0_SAB_INIT0_MASK;
@@ -617,7 +688,7 @@ int board_late_init(void)
         * on HS devices.
         */
        if (get_device_type() == HS_DEVICE)
-               setenv("boot_fit", "1");
+               env_set("boot_fit", "1");
 #endif
        return 0;
 }
@@ -673,7 +744,7 @@ int usb_gadget_handle_interrupts(int index)
 #endif /* CONFIG_USB_DWC3 */
 
 #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
-int omap_xhci_board_usb_init(int index, enum usb_init_type init)
+int board_usb_init(int index, enum usb_init_type init)
 {
        enable_usb_clocks(index);
 #ifdef CONFIG_USB_DWC3
@@ -704,7 +775,7 @@ int omap_xhci_board_usb_init(int index, enum usb_init_type init)
        return 0;
 }
 
-int omap_xhci_board_usb_cleanup(int index, enum usb_init_type init)
+int board_usb_cleanup(int index, enum usb_init_type init)
 {
 #ifdef CONFIG_USB_DWC3
        switch (index) {
@@ -782,10 +853,10 @@ int board_eth_init(bd_t *bis)
        mac_addr[4] = mac_lo & 0xFF;
        mac_addr[5] = (mac_lo & 0xFF00) >> 8;
 
-       if (!getenv("ethaddr")) {
+       if (!env_get("ethaddr")) {
                puts("<ethaddr> not set. Validating first E-fuse MAC\n");
                if (is_valid_ethaddr(mac_addr))
-                       eth_setenv_enetaddr("ethaddr", mac_addr);
+                       eth_env_set_enetaddr("ethaddr", mac_addr);
        }
 
        mac_lo = readl(&cdev->macid1l);
@@ -797,9 +868,9 @@ int board_eth_init(bd_t *bis)
        mac_addr[4] = mac_lo & 0xFF;
        mac_addr[5] = (mac_lo & 0xFF00) >> 8;
 
-       if (!getenv("eth1addr")) {
+       if (!env_get("eth1addr")) {
                if (is_valid_ethaddr(mac_addr))
-                       eth_setenv_enetaddr("eth1addr", mac_addr);
+                       eth_env_set_enetaddr("eth1addr", mac_addr);
        }
 
        if (board_is_eposevm()) {
@@ -829,10 +900,23 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
-#ifdef CONFIG_SPL_LOAD_FIT
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+       ft_cpu_setup(blob, bd);
+
+       return 0;
+}
+#endif
+
+#if defined(CONFIG_SPL_LOAD_FIT) || defined(CONFIG_DTB_RESELECT)
 int board_fit_config_name_match(const char *name)
 {
-       if (board_is_evm() && !strcmp(name, "am437x-gp-evm"))
+       bool eeprom_read = board_ti_was_eeprom_read();
+
+       if (!strcmp(name, "am4372-generic") && !eeprom_read)
+               return 0;
+       else if (board_is_evm() && !strcmp(name, "am437x-gp-evm"))
                return 0;
        else if (board_is_sk() && !strcmp(name, "am437x-sk-evm"))
                return 0;
@@ -845,9 +929,26 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
+#ifdef CONFIG_DTB_RESELECT
+int embedded_dtb_select(void)
+{
+       do_board_detect();
+       fdtdec_setup();
+
+       return 0;
+}
+#endif
+
 #ifdef CONFIG_TI_SECURE_DEVICE
 void board_fit_image_post_process(void **p_image, size_t *p_size)
 {
        secure_boot_verify_image(p_image, p_size);
 }
+
+void board_tee_image_process(ulong tee_image, size_t tee_size)
+{
+       secure_tee_install((u32)tee_image);
+}
+
+U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TEE, board_tee_image_process);
 #endif