net: Move enetaddr env access code to env config instead of net config

[u-boot] / board / timll / devkit8000 / devkit8000.c

diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 22b3fac398433d292f560e53f641bc5a1f0028d0..4bbbd818486ea9d9b00056200210d7cc834742fa 100644 (file)
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -14,25 +14,12 @@
  *     Syed Mohammed Khasim <khasim@ti.com>
  *
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 #include <common.h>
+#include <dm.h>
+#include <environment.h>
+#include <ns16550.h>
 #include <twl4030.h>
 #include <asm/io.h>
 #include <asm/arch/mmc_host_def.h>
@@ -59,6 +46,18 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
        0
 };
 
+static const struct ns16550_platdata devkit8000_serial = {
+       .base = OMAP34XX_UART3,
+       .reg_shift = 2,
+       .clock = V_NS16550_CLK,
+       .fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(devkit8000_uart) = {
+       "ns16550_serial",
+       &devkit8000_serial
+};
+
 /*
  * Routine: board_init
  * Description: Early hardware init.
@@ -104,7 +103,7 @@ int misc_init_r(void)
                        CONFIG_DM9000_BASE, GPMC_SIZE_16M);
 
        /* Use OMAP DIE_ID as MAC address */
-       if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
+       if (!eth_env_get_enetaddr("ethaddr", enetaddr)) {
                printf("ethaddr not set, using Die ID\n");
                die_id_0 = readl(&id_base->die_id_0);
                enetaddr[0] = 0x02; /* locally administered */
@@ -113,11 +112,11 @@ int misc_init_r(void)
                enetaddr[3] = (die_id_0 & 0x00ff0000) >> 16;
                enetaddr[4] = (die_id_0 & 0x0000ff00) >> 8;
                enetaddr[5] = (die_id_0 & 0x000000ff);
-               eth_setenv_enetaddr("ethaddr", enetaddr);
+               eth_env_set_enetaddr("ethaddr", enetaddr);
        }
 #endif
 
-       dieid_num_r();
+       omap_die_id_display();
 
        return 0;
 }
@@ -133,13 +132,20 @@ void set_muxconf_regs(void)
        MUX_DEVKIT8000();
 }
 
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_MMC)
 int board_mmc_init(bd_t *bis)
 {
        return omap_mmc_init(0, 0, 0, -1, -1);
 }
 #endif
 
+#if defined(CONFIG_MMC)
+void board_mmc_power_init(void)
+{
+       twl4030_power_mmc_init(0);
+}
+#endif
+
 #if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
 /*
  * Routine: board_eth_init
@@ -153,7 +159,7 @@ int board_eth_init(bd_t *bis)
 
 #ifdef CONFIG_SPL_OS_BOOT
 /*
- * Do board specific preperation before SPL
+ * Do board specific preparation before SPL
  * Linux boot
  */
 void spl_board_prepare_for_linux(void)
@@ -171,10 +177,10 @@ void spl_board_prepare_for_linux(void)
 int spl_start_uboot(void)
 {
        int val = 0;
-       if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) {
-               gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY);
-               val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY);
-               gpio_free(CONFIG_SPL_OS_BOOT_KEY);
+       if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) {
+               gpio_direction_input(SPL_OS_BOOT_KEY);
+               val = gpio_get_value(SPL_OS_BOOT_KEY);
+               gpio_free(SPL_OS_BOOT_KEY);
        }
        return !val;
 }