tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seed

[u-boot] / board / tqc / tqm834x / tqm834x.c

diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c
index 2aa97f2b36cc20055026906997f77e533b1c6347..d891a3844ca3836284a907faa7e5514840bcdd84 100644 (file)
--- a/board/tqc/tqm834x/tqm834x.c
+++ b/board/tqc/tqm834x/tqm834x.c
@@ -2,24 +2,7 @@
  * (C) Copyright 2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -59,7 +42,7 @@ ulong flash_get_size (ulong base, int banknum);
 
 /* Local functions */
 static int detect_num_flash_banks(void);
-static long int get_ddr_bank_size(short cs, volatile long *base);
+static long int get_ddr_bank_size(short cs, long *base);
 static void set_cs_bounds(short cs, long base, long size);
 static void set_cs_config(short cs, long config);
 static void set_ddr_config(void);
@@ -120,10 +103,10 @@ phys_size_t initdram (int board_type)
                debug("\nDetecting Bank%d\n", cs);
 
                bank_size = get_ddr_bank_size(cs,
-                       (volatile long*)(CONFIG_SYS_DDR_BASE + size));
+                       (long *)(CONFIG_SYS_DDR_BASE + size));
                size += bank_size;
 
-               debug("DDR Bank%d size: %d MiB\n\n", cs, bank_size >> 20);
+               debug("DDR Bank%d size: %ld MiB\n\n", cs, bank_size >> 20);
 
                /* exit if less than one bank */
                if(size < DDR_MAX_SIZE_PER_CS) break;
@@ -262,7 +245,7 @@ static int detect_num_flash_banks(void)
 /*************************************************************************
  * Detect the size of a ddr bank. Sets CS bounds and CS config accordingly.
  */
-static long int get_ddr_bank_size(short cs, volatile long *base)
+static long int get_ddr_bank_size(short cs, long *base)
 {
        /* This array lists all valid DDR SDRAM configurations, with
         * Bank sizes in bytes. (Refer to Table 9-27 in the MPC8349E RM).
@@ -333,7 +316,7 @@ static long int get_ddr_bank_size(short cs, volatile long *base)
  */
 static void set_cs_bounds(short cs, long base, long size)
 {
-       debug("Setting bounds %08x, %08x for cs %d\n", base, size, cs);
+       debug("Setting bounds %08lx, %08lx for cs %d\n", base, size, cs);
        if(size == 0){
                im->ddr.csbnds[cs].csbnds = 0x00000000;
        } else {
@@ -351,7 +334,7 @@ static void set_cs_bounds(short cs, long base, long size)
  */
 static void set_cs_config(short cs, long config)
 {
-       debug("Setting config %08x for cs %d\n", config, cs);
+       debug("Setting config %08lx for cs %d\n", config, cs);
        im->ddr.cs_config[cs] = config;
        SYNC;
 }
@@ -431,12 +414,14 @@ static void set_ddr_config(void) {
 }
 
 #ifdef CONFIG_OF_BOARD_SETUP
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
 
 #ifdef CONFIG_PCI
        ft_pci_setup(blob, bd);
 #endif /* CONFIG_PCI */
+
+       return 0;
 }
 #endif /* CONFIG_OF_BOARD_SETUP */