Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

[u-boot] / board / tqc / tqm85xx / tqm85xx.c

diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index aa7827e1ec6febc121ff9f285e9e2b2a82a71692..fc2a6cbdb54fb4b0b9b1a8ba461e822f64f785d7 100644 (file)
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -269,8 +269,6 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
-       volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
        /*
         * Adjust flash start and offset to detected values
         */
@@ -281,26 +279,27 @@ int misc_init_r (void)
         * Recalculate CS configuration if second FLASH bank is available
         */
        if (flash_info[0].size > 0) {
-               memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
-                       (CONFIG_SYS_OR1_PRELIM & 0x00007fff);
-               memctl->br1 = gd->bd->bi_flashstart |
-                       (CONFIG_SYS_BR1_PRELIM & 0x00007fff);
+               set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) |
+                          (CONFIG_SYS_OR1_PRELIM & 0x00007fff));
+               set_lbc_br(1, gd->bd->bi_flashstart |
+                          (CONFIG_SYS_BR1_PRELIM & 0x00007fff));
                /*
                 * Re-check to get correct base address for bank 1
                 */
                flash_get_size (gd->bd->bi_flashstart, 0);
        } else {
-               memctl->or1 = 0;
-               memctl->br1 = 0;
+               set_lbc_or(1, 0);
+               set_lbc_br(1, 0);
        }
 
        /*
         *  If bank 1 is equipped, bank 0 is mapped after bank 1
         */
-       memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
-               (CONFIG_SYS_OR0_PRELIM & 0x00007fff);
-       memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
-               (CONFIG_SYS_BR0_PRELIM & 0x00007fff);
+       set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) |
+                  (CONFIG_SYS_OR0_PRELIM & 0x00007fff));
+       set_lbc_br(0, gd->bd->bi_flashstart |
+                  (CONFIG_SYS_BR0_PRELIM & 0x00007fff));
+
        /*
         * Re-check to get correct base address for bank 0
         */
@@ -341,7 +340,7 @@ int misc_init_r (void)
  */
 static void upmc_write (u_char addr, uint val)
 {
-       volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+       volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
        out_be32 (&lbc->mdr, val);
 
@@ -358,7 +357,7 @@ static void upmc_write (u_char addr, uint val)
 
 uint get_lbc_clock (void)
 {
-       volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+       volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
        sys_info_t sys_info;
        ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
 
@@ -386,7 +385,7 @@ uint get_lbc_clock (void)
 void local_bus_init (void)
 {
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+       volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
        uint lbc_mhz = get_lbc_clock ()  / 1000000;
 
 #ifdef CONFIG_MPC8548
@@ -502,10 +501,10 @@ void local_bus_init (void)
         * set if Local Bus Clock is > 83 MHz.
         */
        if (lbc_mhz > 83)
-               out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
+               set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD);
        else
-               out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN);
-       out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN);
+               set_lbc_or(2, CONFIG_SYS_OR2_CAN);
+       set_lbc_br(2, CONFIG_SYS_BR2_CAN);
 
        /* LGPL4 is UPWAIT */
        out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X);
@@ -636,7 +635,7 @@ static inline void init_pcie1(void)
 
        if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
                printf ("PCIe:  %s, base address %x",
-                       pcie_ep ? "End point" : "Root complex", (uint)pci);
+                       pcie_ep ? "Endpoint" : "Root complex", (uint)pci);
 
                if (pci->pme_msg_det) {
                        pci->pme_msg_det = 0xffffffff;