Fix bug in jumptable call stubs for SPARC.

[u-boot] / board / trab / cmd_trab.c

diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 7e2a6723480440acd383773e9fc10dc45afc4e4a..04a36075b85247dcd7125a5e1aba2104b8d24cad 100644 (file)
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -106,7 +106,7 @@ extern int i2c_write (uchar, uint, int , uchar* , int);
 extern int i2c_read (uchar, uint, int , uchar* , int);
 extern void tsc2000_reg_init (void);
 extern s32 tsc2000_contact_temp (void);
-extern void spi_init(void);
+extern void tsc2000_spi_init(void);
 
 /* function declarations */
 int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -175,7 +175,7 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        led_init ();
        global_vars_init ();
        test_function_table_init ();
-       spi_init ();
+       tsc2000_spi_init ();
 
        if (global_vars_write_to_eeprom () != 0) {
                printf ("%s: error writing global_vars to eeprom\n",
@@ -262,7 +262,7 @@ U_BOOT_CMD(
        "\n"
        "    -  start burn-in test application\n"
        "       The burn-in test could took a while to finish!\n"
-       "       The content of the onboard EEPROM is modified!\n"
+       "       The content of the onboard EEPROM is modified!"
 );
 
 
@@ -295,7 +295,7 @@ U_BOOT_CMD(
        "read dip switch on TRAB",
        "\n"
        "    - read state of dip switch (S1) on TRAB board\n"
-       "      read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
+       "      read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\""
 );
 
 
@@ -323,7 +323,7 @@ U_BOOT_CMD(
        vcc5v,  1,      1,      do_vcc5v,
        "read VCC5V on TRAB",
        "\n"
-       "    - read actual value of voltage VCC5V\n"
+       "    - read actual value of voltage VCC5V"
 );
 
 
@@ -336,7 +336,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                return 1;
        }
 
-       spi_init ();
+       tsc2000_spi_init ();
 
        contact_temp = tsc2000_contact_temp();
        printf ("%d degree C * 100\n", contact_temp) ;
@@ -347,7 +347,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        c_temp, 1,      1,      do_contact_temp,
        "read contact temperature on TRAB",
-       "\n"
+       ""
        "    -  reads the onboard temperature (=contact temperature)\n"
 );
 
@@ -401,7 +401,7 @@ U_BOOT_CMD(
        "print burn in status on TRAB",
        "\n"
        "    -  prints the status variables of the last burn in test\n"
-       "       stored in the onboard EEPROM on TRAB board\n"
+       "       stored in the onboard EEPROM on TRAB board"
 );
 
 static int read_dip (void)
@@ -644,9 +644,9 @@ static int adc_read (unsigned int channel)
 {
        int j = 1000; /* timeout value for wait loop in us */
        int result;
-       S3C2400_ADC *padc;
+       struct s3c2400_adc *padc;
 
-       padc = S3C2400_GetBase_ADC();
+       padc = s3c2400_get_base_adc();
        channel &= 0x7;
 
        adc_init ();
@@ -686,9 +686,9 @@ static int adc_read (unsigned int channel)
 
 static void adc_init (void)
 {
-       S3C2400_ADC *padc;
+       struct s3c2400_adc *padc;
 
-       padc = S3C2400_GetBase_ADC();
+       padc = s3c2400_get_base_adc();
 
        padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
        padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
@@ -707,7 +707,7 @@ static void adc_init (void)
 
 static void led_set (unsigned int state)
 {
-       S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+       struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
        led_init ();
 
@@ -740,7 +740,7 @@ static void led_blink (void)
 
 static void led_init (void)
 {
-       S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+       struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
        /* configure GPA12 as output and set to High -> LED off */
        gpio->PACON &= ~(1 << 12);
@@ -859,7 +859,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                delay = simple_strtoul(argv[1], NULL, 10);
        }
 
-       spi_init ();
+       tsc2000_spi_init ();
        while (1) {
 
 #if defined(CONFIG_CMD_DATE)
@@ -890,7 +890,7 @@ U_BOOT_CMD(
        "delay\n"
        "    - contact temperature [1/100 C] is printed endlessly to console\n"
        "      <delay> specifies the seconds to wait between two measurements\n"
-       "      For each measurment a timestamp is printeted\n"
+       "      For each measurment a timestamp is printeted"
 );
 
 #endif