fsl_pci: create a SET_STD_PCI_INFO() helper wrapper

[u-boot] / board / trab / cmd_trab.c

diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 5020d609f45ff6ac421eff2d8b9a66f81b74f296..ae6f7c6af85617644b039fb52ede6702f1ce890f 100644 (file)
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -106,7 +106,7 @@ extern int i2c_write (uchar, uint, int , uchar* , int);
 extern int i2c_read (uchar, uint, int , uchar* , int);
 extern void tsc2000_reg_init (void);
 extern s32 tsc2000_contact_temp (void);
-extern void spi_init(void);
+extern void tsc2000_spi_init(void);
 
 /* function declarations */
 int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -175,7 +175,7 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        led_init ();
        global_vars_init ();
        test_function_table_init ();
-       spi_init ();
+       tsc2000_spi_init ();
 
        if (global_vars_write_to_eeprom () != 0) {
                printf ("%s: error writing global_vars to eeprom\n",
@@ -258,11 +258,11 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
        burn_in,        1,      1,      do_burn_in,
-       "burn_in - start burn-in test application on TRAB\n",
+       "start burn-in test application on TRAB",
        "\n"
        "    -  start burn-in test application\n"
        "       The burn-in test could took a while to finish!\n"
-       "       The content of the onboard EEPROM is modified!\n"
+       "       The content of the onboard EEPROM is modified!"
 );
 
 
@@ -292,10 +292,10 @@ int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
        dip,    1,      1,      do_dip,
-       "dip     - read dip switch on TRAB\n",
+       "read dip switch on TRAB",
        "\n"
        "    - read state of dip switch (S1) on TRAB board\n"
-       "      read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
+       "      read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\""
 );
 
 
@@ -321,9 +321,9 @@ int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
        vcc5v,  1,      1,      do_vcc5v,
-       "vcc5v   - read VCC5V on TRAB\n",
+       "read VCC5V on TRAB",
        "\n"
-       "    - read actual value of voltage VCC5V\n"
+       "    - read actual value of voltage VCC5V"
 );
 
 
@@ -336,7 +336,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                return 1;
        }
 
-       spi_init ();
+       tsc2000_spi_init ();
 
        contact_temp = tsc2000_contact_temp();
        printf ("%d degree C * 100\n", contact_temp) ;
@@ -346,8 +346,8 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
        c_temp, 1,      1,      do_contact_temp,
-       "c_temp  - read contact temperature on TRAB\n",
-       "\n"
+       "read contact temperature on TRAB",
+       ""
        "    -  reads the onboard temperature (=contact temperature)\n"
 );
 
@@ -398,10 +398,10 @@ int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
        bis,    1,      1,      do_burn_in_status,
-       "bis     - print burn in status on TRAB\n",
+       "print burn in status on TRAB",
        "\n"
        "    -  prints the status variables of the last burn in test\n"
-       "       stored in the onboard EEPROM on TRAB board\n"
+       "       stored in the onboard EEPROM on TRAB board"
 );
 
 static int read_dip (void)
@@ -859,7 +859,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                delay = simple_strtoul(argv[1], NULL, 10);
        }
 
-       spi_init ();
+       tsc2000_spi_init ();
        while (1) {
 
 #if defined(CONFIG_CMD_DATE)
@@ -886,11 +886,11 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
        tlog,   2,      1,      do_temp_log,
-       "tlog    - log contact temperature [1/100 C] to console (endlessly)\n",
+       "log contact temperature [1/100 C] to console (endlessly)",
        "delay\n"
        "    - contact temperature [1/100 C] is printed endlessly to console\n"
        "      <delay> specifies the seconds to wait between two measurements\n"
-       "      For each measurment a timestamp is printeted\n"
+       "      For each measurment a timestamp is printeted"
 );
 
 #endif