arm: Remove polaris and trizepsiv boards

[u-boot] / board / trizepsiv / conxs.c

diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
deleted file mode 100644 (file)
index 1ddf05d..0000000
--- a/board/trizepsiv/conxs.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefano Babic, DENX Gmbh, sbabic@denx.de
- *
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <usb.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define                RH_A_PSM        (1 << 8)        /* power switching mode */
-#define                RH_A_NPS        (1 << 9)        /* no power switching */
-
-extern struct serial_device serial_ffuart_device;
-extern struct serial_device serial_btuart_device;
-extern struct serial_device serial_stuart_device;
-
-#if CONFIG_MK_POLARIS
-#define BOOT_CONSOLE   "serial_stuart"
-#else
-#define BOOT_CONSOLE   "serial_ffuart"
-#endif
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-       writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
-               ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
-               UHCHR);
-
-       writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
-
-       while (readl(UHCHR) & UHCHR_FSBIR)
-               ;
-
-       writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
-       writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
-
-       /* Clear any OTG Pin Hold */
-       if (readl(PSSR) & PSSR_OTGPH)
-               writel(readl(PSSR) | PSSR_OTGPH, PSSR);
-
-       writel(readl(UHCRHDA) & ~(RH_A_NPS), UHCRHDA);
-       writel(readl(UHCRHDA) | RH_A_PSM, UHCRHDA);
-
-       /* Set port power control mask bits, only 3 ports. */
-       writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
-
-       return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-       return 0;
-}
-
-void usb_board_stop(void)
-{
-       writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
-       udelay(11);
-       writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
-       writel(readl(UHCCOMS) | 1, UHCCOMS);
-       udelay(10);
-
-       writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
-
-       return;
-}
-
-int board_init (void)
-{
-       /* We have RAM, disable cache */
-       dcache_disable();
-       icache_disable();
-
-       /* arch number of ConXS Board */
-       gd->bd->bi_arch_number = 776;
-
-       /* adress of boot parameters */
-       gd->bd->bi_boot_params = 0xa000003c;
-
-       return 0;
-}
-
-int board_late_init(void)
-{
-       char *console=getenv("boot_console");
-
-       if ((console == NULL) || (strcmp(console,"serial_btuart") &&
-               strcmp(console,"serial_stuart") &&
-               strcmp(console,"serial_ffuart"))) {
-                       console = BOOT_CONSOLE;
-       }
-       setenv("stdout",console);
-       setenv("stdin", console);
-       setenv("stderr",console);
-       return 0;
-}
-
-int dram_init(void)
-{
-       pxa2xx_dram_init();
-       gd->ram_size = PHYS_SDRAM_1_SIZE;
-       return 0;
-}
-
-void dram_init_banksize(void)
-{
-       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
-       return dm9000_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-       pxa_mmc_register(0);
-       return 0;
-}
-#endif