/*
* (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <fdtdec.h>
+#include <fpga.h>
+#include <mmc.h>
#include <netdev.h>
+#include <zynqpl.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
+static xilinx_desc fpga;
+
+/* It can be done differently */
+static xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10);
+static xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15);
+static xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20);
+static xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30);
+static xilinx_desc fpga035 = XILINX_XC7Z035_DESC(0x35);
+static xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45);
+static xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100);
+#endif
+
int board_init(void)
{
- icache_enable();
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
+ u32 idcode;
+
+ idcode = zynq_slcr_get_idcode();
+
+ switch (idcode) {
+ case XILINX_ZYNQ_7010:
+ fpga = fpga010;
+ break;
+ case XILINX_ZYNQ_7015:
+ fpga = fpga015;
+ break;
+ case XILINX_ZYNQ_7020:
+ fpga = fpga020;
+ break;
+ case XILINX_ZYNQ_7030:
+ fpga = fpga030;
+ break;
+ case XILINX_ZYNQ_7035:
+ fpga = fpga035;
+ break;
+ case XILINX_ZYNQ_7045:
+ fpga = fpga045;
+ break;
+ case XILINX_ZYNQ_7100:
+ fpga = fpga100;
+ break;
+ }
+#endif
+
+#if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_FPGA_SUPPORT) && defined(CONFIG_SPL_BUILD))
+ fpga_init();
+ fpga_add(fpga_xilinx, &fpga);
+#endif
return 0;
}
+int board_late_init(void)
+{
+ switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+ case ZYNQ_BM_NOR:
+ setenv("modeboot", "norboot");
+ break;
+ case ZYNQ_BM_SD:
+ setenv("modeboot", "sdboot");
+ break;
+ case ZYNQ_BM_JTAG:
+ setenv("modeboot", "jtagboot");
+ break;
+ default:
+ setenv("modeboot", "");
+ break;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ puts("Board:\tXilinx Zynq\n");
+ return 0;
+}
+#endif
-#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
u32 ret = 0;
+#ifdef CONFIG_XILINX_AXIEMAC
+ ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR,
+ XILINX_AXIDMA_BASEADDR);
+#endif
+#ifdef CONFIG_XILINX_EMACLITE
+ u32 txpp = 0;
+ u32 rxpp = 0;
+# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ txpp = 1;
+# endif
+# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+ rxpp = 1;
+# endif
+ ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR,
+ txpp, rxpp);
+#endif
+
#if defined(CONFIG_ZYNQ_GEM)
# if defined(CONFIG_ZYNQ_GEM0)
- ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0);
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
+ CONFIG_ZYNQ_GEM_PHY_ADDR0,
+ CONFIG_ZYNQ_GEM_EMIO0);
# endif
# if defined(CONFIG_ZYNQ_GEM1)
- ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1);
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
+ CONFIG_ZYNQ_GEM_PHY_ADDR1,
+ CONFIG_ZYNQ_GEM_EMIO1);
+# endif
+#endif
+ return ret;
+}
+
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bd)
+{
+ int ret = 0;
+
+#if defined(CONFIG_ZYNQ_SDHCI)
+# if defined(CONFIG_ZYNQ_SDHCI0)
+ ret = zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR0);
+# endif
+# if defined(CONFIG_ZYNQ_SDHCI1)
+ ret |= zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR1);
# endif
#endif
return ret;
int dram_init(void)
{
+#ifdef CONFIG_OF_CONTROL
+ int node;
+ fdt_addr_t addr;
+ fdt_size_t size;
+ const void *blob = gd->fdt_blob;
+
+ node = fdt_node_offset_by_prop_value(blob, -1, "device_type",
+ "memory", 7);
+ if (node == -FDT_ERR_NOTFOUND) {
+ debug("ZYNQ DRAM: Can't get memory node\n");
+ return -1;
+ }
+ addr = fdtdec_get_addr_size(blob, node, "reg", &size);
+ if (addr == FDT_ADDR_T_NONE || size == 0) {
+ debug("ZYNQ DRAM: Can't get base address or size\n");
+ return -1;
+ }
+ gd->ram_size = size;
+#else
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#endif
+ zynq_ddrc_init();
return 0;
}
projects / u-boot / blobdiff