#include <common.h>
#include <netdev.h>
+#include <ahci.h>
+#include <scsi.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
+#include <usb.h>
+#include <dwc3-uboot.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
+ printf("EL Level:\tEL%d\n", current_el());
+
return 0;
}
{
}
+#ifdef CONFIG_SCSI_AHCI_PLAT
+void scsi_init(void)
+{
+ ahci_init((void __iomem *)ZYNQMP_SATA_BASEADDR);
+ scsi_scan(1);
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ u32 ret = 0;
+
+#if defined(CONFIG_ZYNQ_GEM)
+# if defined(CONFIG_ZYNQ_GEM0)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0,
+ CONFIG_ZYNQ_GEM_PHY_ADDR0, 0);
+# endif
+# if defined(CONFIG_ZYNQ_GEM1)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1,
+ CONFIG_ZYNQ_GEM_PHY_ADDR1, 0);
+# endif
+# if defined(CONFIG_ZYNQ_GEM2)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR2,
+ CONFIG_ZYNQ_GEM_PHY_ADDR2, 0);
+# endif
+# if defined(CONFIG_ZYNQ_GEM3)
+ ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR3,
+ CONFIG_ZYNQ_GEM_PHY_ADDR3, 0);
+# endif
+#endif
+ return ret;
+}
+
#ifdef CONFIG_CMD_MMC
int board_mmc_init(bd_t *bd)
{
switch (bootmode) {
case SD_MODE:
+ case EMMC_MODE:
setenv("modeboot", "sdboot");
break;
default:
return 0;
}
+
+int checkboard(void)
+{
+ puts("Board:\tXilinx ZynqMP\n");
+ return 0;
+}
+
+#ifdef CONFIG_USB_DWC3
+static struct dwc3_device dwc3_device_data = {
+ .maximum_speed = USB_SPEED_HIGH,
+ .base = ZYNQMP_USB0_XHCI_BASEADDR,
+ .dr_mode = USB_DR_MODE_PERIPHERAL,
+ .index = 0,
+};
+
+int usb_gadget_handle_interrupts(void)
+{
+ dwc3_uboot_handle_interrupt(0);
+ return 0;
+}
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ return dwc3_uboot_init(&dwc3_device_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ dwc3_uboot_exit(index);
+ return 0;
+}
+#endif