mach-stm32: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET

[u-boot] / cmd / Kconfig

diff --git a/cmd/Kconfig b/cmd/Kconfig
index 9848c067daa96d9c5fcdd07e3c1ae560d9c46544..2fa0829925c1b9f290d982fbbc1a008a7dcdc2ba 100644 (file)
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -226,7 +226,7 @@ config CMD_BOOTEFI
 
 config CMD_BOOTEFI_HELLO_COMPILE
        bool "Compile a standard EFI hello world binary for testing"
-       depends on CMD_BOOTEFI && (ARM || X86)
+       depends on CMD_BOOTEFI && (ARM || X86 || RISCV)
        default y
        help
          This compiles a standard EFI hello world application with U-Boot so
@@ -655,8 +655,8 @@ config CMD_FASTBOOT
          This enables the command "fastboot" which enables the Android
          fastboot mode for the platform. Fastboot is a protocol for
          downloading images, flashing and device control used on
-         Android devices. Fastboot requires support for acting as a USB
-         device.
+         Android devices. Fastboot requires either the network stack
+         enabled or support for acting as a USB device.
 
          See doc/README.android-fastboot for more information.
 
@@ -707,6 +707,13 @@ config CMD_FPGA_LOADP
          Supports loading an FPGA device from a bitstream buffer containing
          a partial bitstream.
 
+config CMD_FPGA_LOAD_SECURE
+       bool "fpga loads - loads secure bitstreams (Xilinx only)"
+       depends on CMD_FPGA
+       help
+         Enables the fpga loads command which is used to load secure
+         (authenticated or encrypted or both) bitstreams on to FPGA.
+
 config CMD_FPGAD
        bool "fpgad - dump FPGA registers"
        help
@@ -833,6 +840,14 @@ config CMD_MMC_RPMB
          Enable the commands for reading, writing and programming the
          key for the Replay Protection Memory Block partition in eMMC.
 
+config CMD_MMC_SWRITE
+       bool "mmc swrite"
+       depends on CMD_MMC && MMC_WRITE
+       select IMAGE_SPARSE
+       help
+         Enable support for the "mmc swrite" command to write Android sparse
+         images to eMMC.
+
 config CMD_NAND
        bool "nand"
        default y if NAND_SUNXI
@@ -1106,6 +1121,16 @@ config BOOTP_HOSTNAME
        help
          The name may or may not be qualified with the local domain name.
 
+config BOOTP_PREFER_SERVERIP
+       bool "serverip variable takes precedent over DHCP server IP."
+       depends on CMD_BOOTP
+       help
+         By default a BOOTP/DHCP reply will overwrite the 'serverip' variable.
+
+         With this option enabled, the 'serverip' variable in the environment
+         takes precedence over DHCP server IP and will only be set by the DHCP
+         server if not already set in the environment.
+
 config BOOTP_SUBNETMASK
        bool "Request & store 'netmask' from BOOTP/DHCP server"
        default y
@@ -1204,6 +1229,7 @@ config CMD_DNS
 
 config CMD_LINK_LOCAL
        bool "linklocal"
+       select LIB_RAND
        help
          Acquire a network IP address using the link-local protocol
 
@@ -1223,6 +1249,11 @@ config CMD_PXE
        help
          Boot image via network using PXE protocol
 
+config CMD_WOL
+       bool "wol"
+       help
+         Wait for wake-on-lan Magic Packet
+
 endif
 
 menu "Misc commands"
@@ -1325,6 +1356,13 @@ config CMD_MISC
        help
          Delay execution for some time
 
+config MP
+       bool "support for multiprocessor"
+       help
+         This provides an option to brinup
+         different processors in multiprocessor
+         cases.
+
 config CMD_TIMER
        bool "timer"
        help
@@ -1738,6 +1776,22 @@ config CMD_TRACE
          for analsys (e.g. using bootchart). See doc/README.trace for full
          details.
 
+config CMD_AVB
+       bool "avb - Android Verified Boot 2.0 operations"
+       depends on LIBAVB
+       default n
+       help
+         Enables a "avb" command to perform verification of partitions using
+         Android Verified Boot 2.0 functionality. It includes such subcommands:
+           avb init - initialize avb2 subsystem
+           avb read_rb - read rollback index
+           avb write_rb - write rollback index
+           avb is_unlocked - check device lock state
+           avb get_uuid - read and print uuid of a partition
+           avb read_part - read data from partition
+           avb read_part_hex - read data from partition and output to stdout
+           avb write_part - write data to partition
+           avb verify - run full verification chain
 endmenu
 
 config CMD_UBI