Check if a variable is defined in the environment for use in
shell scripting.
+config CMD_ENV_CALLBACK
+ bool "env callbacks - print callbacks and their associated variables"
+ help
+ Some environment variable have callbacks defined by
+ U_BOOT_ENV_CALLBACK. These are called when the variable changes.
+ For example changing "baudrate" adjust the serial baud rate. This
+ command lists the currently defined callbacks.
+
+config CMD_ENV_FLAGS
+ bool "env flags -print variables that have non-default flags"
+ help
+ Some environment variables have special flags that control their
+ behaviour. For example, serial# can only be written once and cannot
+ be deleted. This command shows the variables that have special
+ flags.
+
endmenu
menu "Memory commands"
help
Compute CRC32.
+config CMD_EEPROM
+ bool "eeprom - EEPROM subsystem"
+ help
+ (deprecated, needs conversion to driver model)
+ Provides commands to read and write EEPROM (Electrically Erasable
+ Programmable Read Only Memory) chips that are connected over an
+ I2C bus.
+
+config CMD_EEPROM_LAYOUT
+ bool "Enable layout-aware eeprom commands"
+ depends on CMD_EEPROM
+ help
+ (deprecated, needs conversion to driver model)
+ When enabled, additional eeprom sub-commands become available.
+
+ eeprom print - prints the contents of the eeprom in a human-readable
+ way (eeprom layout fields, and data formatted to be fit for human
+ consumption).
+
+ eeprom update - allows user to update eeprom fields by specifying
+ the field name, and providing the new data in a human readable format
+ (same format as displayed by the eeprom print command).
+
+ Both commands can either auto detect the layout, or be told which
+ layout to use.
+
+ Feature API:
+ __weak int parse_layout_version(char *str)
+ - override to provide your own layout name parsing
+ __weak void __eeprom_layout_assign(struct eeprom_layout *layout,
+ int layout_version);
+ - override to setup the layout metadata based on the version
+ __weak int eeprom_layout_detect(unsigned char *data)
+ - override to provide your own algorithm for detecting layout
+ version
+ eeprom_field.c
+ - contains various printing and updating functions for common
+ types of eeprom fields. Can be used for defining
+ custom layouts.
+
+config EEPROM_LAYOUT_HELP_STRING
+ string "Tells user what layout names are supported"
+ depends on CMD_EEPROM_LAYOUT
+ default "<not defined>"
+ help
+ Help printed with the LAYOUT VERSIONS part of the 'eeprom'
+ command's help.
+
config CMD_MD5SUM
bool "md5sum"
default n
menu "Device access commands"
+config CMD_CLK
+ bool "clk - Show clock frequencies"
+ help
+ (deprecated)
+ Shows clock frequences by calling a sock_clk_dump() hook function.
+ This is depreated in favour of using the CLK uclass and accessing
+ clock values from associated drivers. However currently no command
+ exists for this.
+
config CMD_DM
bool "dm - Access to driver model information"
depends on DM
help
FPGA support.
+config CMD_FPGA_LOADBP
+ bool "fpga loadbp - load partial bitstream (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGA_LOADFS
+ bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+ bool "fpga loadmk - load bitstream from image"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+ bool "fpga loadp - load partial bitstream"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGAD
+ bool "fpgad - dump FPGA registers"
+ help
+ (legacy, needs conversion to driver model)
+ Provides a way to dump FPGA registers by calling the board-specific
+ fpga_get_reg() function. This functions similarly to the 'md'
+ command.
+
+config CMD_FUSE
+ bool "fuse - support for the fuse subssystem"
+ help
+ (deprecated - needs conversion to driver model)
+ This allows reading, sensing, programming or overriding fuses
+ which control the behaviour of the device. The command uses the
+ fuse_...() API.
+
config CMD_REMOTEPROC
bool "remoteproc"
depends on REMOTEPROC
help
GPIO support.
+config CMD_FDC
+ bool "fdcboot - Boot from floppy device"
+ help
+ The 'fdtboot' command allows booting an image from a floppy disk.
+
endmenu
help
Acquire a network IP address using the link-local protocol
+config CMD_ETHSW
+ bool "ethsw"
+ help
+ Allow control of L2 Ethernet switch commands. These are supported
+ by the vsc9953 Ethernet driver at present. Sub-commands allow
+ operations such as enabling / disabling a port and
+ viewing/maintaining the filtering database (FDB)
+
endmenu
menu "Misc commands"
help
Enable the "icache" and "dcache" commands
+config CMD_DISPLAY
+ bool "Enable the 'display' command, for character displays"
+ help
+ (this needs porting to driver model)
+ This enables the 'display' command which allows a string to be
+ displayed on a simple board-specific display. Implement
+ display_putc() to use it.
+
config CMD_LED
bool "led"
default y if LED
with led on/off/togle/blink. Any LED drivers can be controlled with
this command, e.g. led_gpio.
+config CMD_DATE
+ bool "date"
+ default y if DM_RTC
+ help
+ Enable the 'date' command for getting/setting the time/date in RTC
+ devices.
+
config CMD_TIME
bool "time"
help
endmenu
menu "Filesystem commands"
+config CMD_CBFS
+ bool "Enable the 'cbfs' command"
+ depends on FS_CBFS
+ help
+ Define this to enable support for reading from a Coreboot
+ filesystem. This is a ROM-based filesystem used for accessing files
+ on systems that use coreboot as the first boot-loader and then load
+ U-Boot to actually boot the Operating System. Available commands are
+ cbfsinit, cbfsinfo, cbfsls and cbfsload.
+
+config CMD_CRAMFS
+ bool "Enable the 'cramfs' command"
+ depends on FS_CRAMFS
+ help
+ This provides commands for dealing with CRAMFS (Compressed ROM
+ filesystem). CRAMFS is useful when space is tight since files are
+ compressed. Two commands are provided:
+
+ cramfsls - lists files in a cramfs image
+ cramfsload - loads a file from a cramfs image
+
config CMD_EXT2
bool "ext2 command support"
help
for some PowerPC processors. For details please see the
docuemntation in doc/README.beddbug
+config CMD_DIAG
+ bool "diag - Board diagnostics"
+ help
+ This command provides access to board diagnostic tests. These are
+ called Power-on Self Tests (POST). The command allows listing of
+ available tests and running either all the tests, or specific tests
+ identified by name.
+
endmenu
config CMD_UBI