Check if a variable is defined in the environment for use in
shell scripting.
+config CMD_ENV_CALLBACK
+ bool "env callbacks - print callbacks and their associated variables"
+ help
+ Some environment variable have callbacks defined by
+ U_BOOT_ENV_CALLBACK. These are called when the variable changes.
+ For example changing "baudrate" adjust the serial baud rate. This
+ command lists the currently defined callbacks.
+
+config CMD_ENV_FLAGS
+ bool "env flags -print variables that have non-default flags"
+ help
+ Some environment variables have special flags that control their
+ behaviour. For example, serial# can only be written once and cannot
+ be deleted. This command shows the variables that have special
+ flags.
+
endmenu
menu "Memory commands"
help
Compute CRC32.
+config CMD_EEPROM
+ bool "eeprom - EEPROM subsystem"
+ help
+ (deprecated, needs conversion to driver model)
+ Provides commands to read and write EEPROM (Electrically Erasable
+ Programmable Read Only Memory) chips that are connected over an
+ I2C bus.
+
+config CMD_EEPROM_LAYOUT
+ bool "Enable layout-aware eeprom commands"
+ depends on CMD_EEPROM
+ help
+ (deprecated, needs conversion to driver model)
+ When enabled, additional eeprom sub-commands become available.
+
+ eeprom print - prints the contents of the eeprom in a human-readable
+ way (eeprom layout fields, and data formatted to be fit for human
+ consumption).
+
+ eeprom update - allows user to update eeprom fields by specifying
+ the field name, and providing the new data in a human readable format
+ (same format as displayed by the eeprom print command).
+
+ Both commands can either auto detect the layout, or be told which
+ layout to use.
+
+ Feature API:
+ __weak int parse_layout_version(char *str)
+ - override to provide your own layout name parsing
+ __weak void __eeprom_layout_assign(struct eeprom_layout *layout,
+ int layout_version);
+ - override to setup the layout metadata based on the version
+ __weak int eeprom_layout_detect(unsigned char *data)
+ - override to provide your own algorithm for detecting layout
+ version
+ eeprom_field.c
+ - contains various printing and updating functions for common
+ types of eeprom fields. Can be used for defining
+ custom layouts.
+
+config EEPROM_LAYOUT_HELP_STRING
+ string "Tells user what layout names are supported"
+ depends on CMD_EEPROM_LAYOUT
+ default "<not defined>"
+ help
+ Help printed with the LAYOUT VERSIONS part of the 'eeprom'
+ command's help.
+
config CMD_MD5SUM
bool "md5sum"
default n
help
FPGA support.
+config CMD_FPGA_LOADBP
+ bool "fpga loadbp - load partial bitstream (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGA_LOADFS
+ bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a FAT filesystem.
+
+config CMD_FPGA_LOADMK
+ bool "fpga loadmk - load bitstream from image"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a image generated by mkimage.
+
+config CMD_FPGA_LOADP
+ bool "fpga loadp - load partial bitstream"
+ depends on CMD_FPGA
+ help
+ Supports loading an FPGA device from a bitstream buffer containing
+ a partial bitstream.
+
+config CMD_FPGAD
+ bool "fpgad - dump FPGA registers"
+ help
+ (legacy, needs conversion to driver model)
+ Provides a way to dump FPGA registers by calling the board-specific
+ fpga_get_reg() function. This functions similarly to the 'md'
+ command.
+
+config CMD_FUSE
+ bool "fuse - support for the fuse subssystem"
+ help
+ (deprecated - needs conversion to driver model)
+ This allows reading, sensing, programming or overriding fuses
+ which control the behaviour of the device. The command uses the
+ fuse_...() API.
+
config CMD_REMOTEPROC
bool "remoteproc"
depends on REMOTEPROC
help
GPIO support.
+config CMD_FDC
+ bool "fdcboot - Boot from floppy device"
+ help
+ The 'fdtboot' command allows booting an image from a floppy disk.
+
endmenu
help
Acquire a network IP address using the link-local protocol
+config CMD_ETHSW
+ bool "ethsw"
+ help
+ Allow control of L2 Ethernet switch commands. These are supported
+ by the vsc9953 Ethernet driver at present. Sub-commands allow
+ operations such as enabling / disabling a port and
+ viewing/maintaining the filtering database (FDB)
+
endmenu
menu "Misc commands"
help
Enable the "icache" and "dcache" commands
+config CMD_DISPLAY
+ bool "Enable the 'display' command, for character displays"
+ help
+ (this needs porting to driver model)
+ This enables the 'display' command which allows a string to be
+ displayed on a simple board-specific display. Implement
+ display_putc() to use it.
+
config CMD_LED
bool "led"
default y if LED
with led on/off/togle/blink. Any LED drivers can be controlled with
this command, e.g. led_gpio.
+config CMD_DATE
+ bool "date"
+ default y if DM_RTC
+ help
+ Enable the 'date' command for getting/setting the time/date in RTC
+ devices.
+
config CMD_TIME
bool "time"
help
config CMD_CRAMFS
bool "Enable the 'cramfs' command"
+ depends on FS_CRAMFS
help
This provides commands for dealing with CRAMFS (Compressed ROM
filesystem). CRAMFS is useful when space is tight since files are
for some PowerPC processors. For details please see the
docuemntation in doc/README.beddbug
+config CMD_DIAG
+ bool "diag - Board diagnostics"
+ help
+ This command provides access to board diagnostic tests. These are
+ called Power-on Self Tests (POST). The command allows listing of
+ available tests and running either all the tests, or specific tests
+ identified by name.
+
endmenu
config CMD_UBI