help
ARM Ltd reference designs flash partition access
+config CMD_ADC
+ bool "adc - Access Analog to Digital Converters info and data"
+ select ADC
+ select DM_REGULATOR
+ help
+ Shows ADC device info and permit printing one-shot analog converted
+ data from a named Analog to Digital Converter.
+
config CMD_CLK
bool "clk - Show clock frequencies"
help
help
MMC memory mapped support.
+config CMD_MMC_RPMB
+ bool "Enable support for RPMB in the mmc command"
+ depends on CMD_MMC
+ help
+ Enable the commands for reading, writing and programming the
+ key for the Replay Protection Memory Block partition in eMMC.
+
config CMD_NAND
bool "nand"
default y if NAND_SUNXI
help
bootp - boot image via network using BOOTP/TFTP protocol
+config CMD_DHCP
+ bool "dhcp"
+ depends on CMD_BOOTP
+ help
+ Boot image via network using DHCP/TFTP protocol
+
config BOOTP_BOOTPATH
- bool "Enable BOOTP BOOTPATH"
+ bool "Request & store 'rootpath' from BOOTP/DHCP server"
+ default y
depends on CMD_BOOTP
+ help
+ Even though the config is called BOOTP_BOOTPATH, it stores the
+ path in the variable 'rootpath'.
config BOOTP_DNS
- bool "Enable bootp DNS"
+ bool "Request & store 'dnsip' from BOOTP/DHCP server"
+ default y
depends on CMD_BOOTP
+ help
+ The primary DNS server is stored as 'dnsip'. If two servers are
+ returned, you must set BOOTP_DNS2 to store that second server IP
+ also.
+
+config BOOTP_DNS2
+ bool "Store 'dnsip2' from BOOTP/DHCP server"
+ depends on BOOTP_DNS
+ help
+ If a DHCP client requests the DNS server IP from a DHCP server,
+ it is possible that more than one DNS serverip is offered to the
+ client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
+ server IP will be stored in the additional environment
+ variable "dnsip2". The first DNS serverip is always
+ stored in the variable "dnsip", when BOOTP_DNS is defined.
config BOOTP_GATEWAY
- bool "Enable BOOTP gateway"
+ bool "Request & store 'gatewayip' from BOOTP/DHCP server"
+ default y
depends on CMD_BOOTP
config BOOTP_HOSTNAME
- bool "Enable BOOTP hostname"
+ bool "Request & store 'hostname' from BOOTP/DHCP server"
+ default y
depends on CMD_BOOTP
+ help
+ The name may or may not be qualified with the local domain name.
config BOOTP_SUBNETMASK
- bool "Enable BOOTP subnetmask"
+ bool "Request & store 'netmask' from BOOTP/DHCP server"
+ default y
depends on CMD_BOOTP
-config BOOTP_PXE
- bool "Enable BOOTP PXE"
+config BOOTP_NTPSERVER
+ bool "Request & store 'ntpserverip' from BOOTP/DHCP server"
depends on CMD_BOOTP
+config BOOTP_PXE
+ bool "Send PXE client arch to BOOTP/DHCP server"
+ default y
+ depends on CMD_BOOTP && CMD_PXE
+ help
+ Supported for ARM, ARM64, and x86 for now.
+
config BOOTP_PXE_CLIENTARCH
hex
- depends on CMD_BOOTP
+ depends on BOOTP_PXE
default 0x16 if ARM64
default 0x15 if ARM
default 0 if X86
config BOOTP_VCI_STRING
string
depends on CMD_BOOTP
- default "U-Boot.armv7" if CPU_V7 || CPU_V7M
+ default "U-Boot.armv7" if CPU_V7A || CPU_V7M || CPU_V7R
default "U-Boot.armv8" if ARM64
default "U-Boot.arm" if ARM
default "U-Boot"
help
Boot image via network using RARP/TFTP protocol
-config CMD_DHCP
- bool "dhcp"
- depends on CMD_BOOTP
- help
- Boot image via network using DHCP/TFTP protocol
-
config CMD_NFS
bool "nfs"
default y
the image into RAM, then using this command to look at it or display
it.
+config CMD_BOOTCOUNT
+ bool "bootcount"
+ depends on BOOTCOUNT_LIMIT
+ help
+ Enable the bootcount command, which allows interrogation and
+ reset of the bootcounter.
+
config CMD_BSP
bool "Enable board-specific commands"
help
saved to memory or to an environment variable. It is also possible
to verify a hash against data in memory.
+config CMD_HVC
+ bool "Support the 'hvc' command"
+ depends on ARM_SMCCC
+ help
+ Allows issuing Hypervisor Calls (HVCs). Mostly useful for
+ development and testing.
+
+config CMD_SMC
+ bool "Support the 'smc' command"
+ depends on ARM_SMCCC
+ help
+ Allows issuing Secure Monitor Calls (SMCs). Mostly useful for
+ development and testing.
+
config HASH_VERIFY
bool "hash -v"
depends on CMD_HASH
help
Add -v option to verify data against a hash.
+config CMD_TPM_V1
+ bool
+
+config CMD_TPM_V2
+ bool
+
config CMD_TPM
bool "Enable the 'tpm' command"
- depends on TPM
+ depends on TPM_V1 || TPM_V2
+ select CMD_TPM_V1 if TPM_V1
+ select CMD_TPM_V2 if TPM_V2
help
This provides a means to talk to a TPM from the command line. A wide
range of commands if provided - see 'tpm help' for details. The
command requires a suitable TPM on your board and the correct driver
must be enabled.
+if CMD_TPM
+
config CMD_TPM_TEST
bool "Enable the 'tpm test' command"
- depends on CMD_TPM
+ depends on TPM_V1
help
- This provides a a series of tests to confirm that the TPM is working
- correctly. The tests cover initialisation, non-volatile RAM, extend,
- global lock and checking that timing is within expectations. The
- tests pass correctly on Infineon TPMs but may need to be adjusted
+ This provides a a series of tests to confirm that the TPMv1.x is
+ working correctly. The tests cover initialisation, non-volatile RAM,
+ extend, global lock and checking that timing is within expectations.
+ The tests pass correctly on Infineon TPMs but may need to be adjusted
for other devices.
+endif
+
endmenu
menu "Firmware commands"
config CMD_LOG
bool "log - Generation, control and access to logging"
+ select LOG
help
This provides access to logging features. It allows the output of
log data to be controlled to a limited extent (setting up the default
projects / u-boot / blobdiff