Extract a part of a multi-image.
config CMD_POWEROFF
- bool
+ bool "poweroff"
+ help
+ Poweroff/Shutdown the system
endmenu
help
Compute CRC32.
+config CRC32_VERIFY
+ bool "crc32 -v"
+ depends on CMD_CRC32
+ help
+ Add -v option to verify data against a crc32 checksum.
+
config CMD_EEPROM
bool "eeprom - EEPROM subsystem"
help
help
Compute MD5 checksum.
-config MD5SUM_VERFIY
+config MD5SUM_VERIFY
bool "md5sum -v"
default n
depends on CMD_MD5SUM
help
Add -v option to verify data against an MD5 checksum.
+config CMD_SHA1SUM
+ bool "sha1sum"
+ select SHA1
+ help
+ Compute SHA1 checksum.
+
+config SHA1SUM_VERIFY
+ bool "sha1sum -v"
+ depends on CMD_SHA1SUM
+ help
+ Add -v option to verify data against a SHA1 checksum.
+
config LOOPW
bool "loopw"
help
help
Display memory information.
+endmenu
+
+menu "Compression commands"
+
+config CMD_LZMADEC
+ bool "lzmadec"
+ select LZMA
+ help
+ Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
+ image from memory.
+
config CMD_UNZIP
bool "unzip"
help
geting device info. It also enables the 'diskboot' command which
permits booting from an IDE drive.
+config CMD_IO
+ bool "io - Support for performing I/O accesses"
+ help
+ Provides an 'iod' command to display I/O space and an 'iow' command
+ to write values to the I/O space. This can be useful for manually
+ checking the state of devices during boot when debugging device
+ drivers, etc.
+
+config CMD_IOTRACE
+ bool "iotrace - Support for tracing I/O activity"
+ help
+ Provides an 'iotrace' command which supports recording I/O reads and
+ writes in a trace buffer in memory . It also maintains a checksum
+ of the trace records (even if space is exhausted) so that the
+ sequence of I/O accesses can be verified.
+
+ When debugging drivers it is useful to see what I/O accesses were
+ done and in what order.
+
+ Even if the individual accesses are of little interest it can be
+ useful to verify that the access pattern is consistent each time
+ an operation is performed. In this case a checksum can be used to
+ characterise the operation of a driver. The checksum can be compared
+ across different runs of the operation to verify that the driver is
+ working properly.
+
+ In particular, when performing major refactoring of the driver, where
+ the access pattern should not change, the checksum provides assurance
+ that the refactoring work has not broken the driver.
+
+ This works by sneaking into the io.h heder for an architecture and
+ redirecting I/O accesses through iotrace's tracing mechanism.
+
+ For now no commands are provided to examine the trace buffer. The
+ format is fairly simple, so 'md' is a reasonable substitute.
+
+ Note: The checksum feature is only useful for I/O regions where the
+ contents do not change outside of software control. Where this is not
+ suitable you can fall back to manually comparing the addresses. It
+ might be useful to enhance tracing to only checksum the accesses and
+ not the data read/written.
+
config CMD_LOADB
bool "loadb"
default y
help
The 'fdtboot' command allows booting an image from a floppy disk.
+config CMD_SATA
+ bool "sata - Access SATA subsystem"
+ select SATA
+ help
+ SATA (Serial Advanced Technology Attachment) is a serial bus
+ standard for connecting to hard drives and other storage devices.
+ This command provides information about attached devices and allows
+ reading, writing and other operations.
+
+ SATA replaces PATA (originally just ATA), which stands for Parallel AT
+ Attachment, where AT refers to an IBM AT (Advanced Technology)
+ computer released in 1984.
+
endmenu
help
Access the system timer.
-config CMD_SETGETDCR
- bool "getdcr, setdcr, getidcr, setidcr"
- depends on 4xx
- default y
- help
- getdcr - Get an AMCC PPC 4xx DCR's value
- setdcr - Set an AMCC PPC 4xx DCR's value
- getidcr - Get a register value via indirect DCR addressing
- setidcr - Set a register value via indirect DCR addressing
-
config CMD_SOUND
bool "sound"
depends on SOUND
saved to memory or to an environment variable. It is also possible
to verify a hash against data in memory.
+config HASH_VERIFY
+ bool "hash -v"
+ depends on CMD_HASH
+ help
+ Add -v option to verify data against a hash.
+
config CMD_TPM
bool "Enable the 'tpm' command"
depends on TPM
config CMD_FAT
bool "FAT command support"
+ select FS_FAT
help
Support for the FAT fs
help
Enables fsuuid command for filesystem UUID.
+config CMD_JFFS2
+ bool "jffs2 command"
+ select FS_JFFS2
+ help
+ Enables commands to support the JFFS2 (Journalling Flash File System
+ version 2) filesystem. This enables fsload, ls and fsinfo which
+ provide the ability to load files, list directories and obtain
+ filesystem information.
+
config CMD_MTDPARTS
- depends on ARCH_SUNXI
bool "MTD partition support"
help
MTD partition support
available tests and running either all the tests, or specific tests
identified by name.
+config CMD_IRQ
+ bool "irq - Show information about interrupts"
+ depends on !ARM && !MIPS && !SH
+ help
+ This enables two commands:
+
+ interrupts - enable or disable interrupts
+ irqinfo - print device-specific interrupt information
+
+config CMD_KGDB
+ bool "kgdb - Allow debugging of U-Boot with gdb"
+ help
+ This enables a 'kgdb' command which allows gdb to connect to U-Boot
+ over a serial link for debugging purposes. This allows
+ single-stepping, inspecting variables, etc. This is supported only
+ on PowerPC at present.
+
endmenu
config CMD_UBI
tristate "Enable UBI - Unsorted block images commands"
select CRC32
select MTD_UBI
+ select CMD_MTDPARTS
default y if NAND_SUNXI
help
UBI is a software layer above MTD layer which admits use of LVM-like
tristate "Enable UBIFS - Unsorted block images filesystem commands"
depends on CMD_UBI
select CRC32
- select RBTREE if ARCH_SUNXI
- select LZO if ARCH_SUNXI
- default y if NAND_SUNXI
+ select LZO
+ default y if CMD_UBI
help
UBIFS is a file system for flash devices which works on top of UBI.