imx: lpi2c: fix clock issue when NACK detected

[u-boot] / cmd / mmc.c

diff --git a/cmd/mmc.c b/cmd/mmc.c
index 68bbf1f51353e6ffa496e75e8ff2d96aea031252..3920a1836a594903116841f809676f34ff022061 100644 (file)
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -128,7 +128,7 @@ static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
        return CMD_RET_SUCCESS;
 }
 
-#ifdef CONFIG_SUPPORT_EMMC_RPMB
+#if CONFIG_IS_ENABLED(CMD_MMC_RPMB)
 static int confirm_key_prog(void)
 {
        puts("Warning: Programming authentication key can be done only once !\n"
@@ -308,8 +308,7 @@ static int do_mmc_read(cmd_tbl_t *cmdtp, int flag,
        return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
 }
 
-#if CONFIG_IS_ENABLED(MMC_WRITE)
-#if defined(CONFIG_FASTBOOT_FLASH)
+#if CONFIG_IS_ENABLED(CMD_MMC_SWRITE)
 static lbaint_t mmc_sparse_write(struct sparse_storage *info, lbaint_t blk,
                                 lbaint_t blkcnt, const void *buffer)
 {
@@ -367,13 +366,14 @@ static int do_mmc_sparse_write(cmd_tbl_t *cmdtp, int flag,
        sparse.mssg = NULL;
        sprintf(dest, "0x" LBAF, sparse.start * sparse.blksz);
 
-       if (write_sparse_image(&sparse, dest, addr))
+       if (write_sparse_image(&sparse, dest, addr, NULL))
                return CMD_RET_FAILURE;
        else
                return CMD_RET_SUCCESS;
 }
 #endif
 
+#if CONFIG_IS_ENABLED(MMC_WRITE)
 static int do_mmc_write(cmd_tbl_t *cmdtp, int flag,
                        int argc, char * const argv[])
 {
@@ -868,10 +868,10 @@ static cmd_tbl_t cmd_mmc[] = {
        U_BOOT_CMD_MKENT(read, 4, 1, do_mmc_read, "", ""),
 #if CONFIG_IS_ENABLED(MMC_WRITE)
        U_BOOT_CMD_MKENT(write, 4, 0, do_mmc_write, "", ""),
-#if defined(CONFIG_FASTBOOT_FLASH)
-       U_BOOT_CMD_MKENT(swrite, 3, 0, do_mmc_sparse_write, "", ""),
-#endif
        U_BOOT_CMD_MKENT(erase, 3, 0, do_mmc_erase, "", ""),
+#endif
+#if CONFIG_IS_ENABLED(CMD_MMC_SWRITE)
+       U_BOOT_CMD_MKENT(swrite, 3, 0, do_mmc_sparse_write, "", ""),
 #endif
        U_BOOT_CMD_MKENT(rescan, 1, 1, do_mmc_rescan, "", ""),
        U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""),
@@ -886,7 +886,7 @@ static cmd_tbl_t cmd_mmc[] = {
        U_BOOT_CMD_MKENT(partconf, 5, 0, do_mmc_partconf, "", ""),
        U_BOOT_CMD_MKENT(rst-function, 3, 0, do_mmc_rst_func, "", ""),
 #endif
-#ifdef CONFIG_SUPPORT_EMMC_RPMB
+#if CONFIG_IS_ENABLED(CMD_MMC_RPMB)
        U_BOOT_CMD_MKENT(rpmb, CONFIG_SYS_MAXARGS, 1, do_mmcrpmb, "", ""),
 #endif
        U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""),
@@ -927,7 +927,7 @@ U_BOOT_CMD(
        "info - display info of the current MMC device\n"
        "mmc read addr blk# cnt\n"
        "mmc write addr blk# cnt\n"
-#if defined(CONFIG_FASTBOOT_FLASH)
+#if CONFIG_IS_ENABLED(CMD_MMC_SWRITE)
        "mmc swrite addr blk#\n"
 #endif
        "mmc erase blk# cnt\n"
@@ -935,6 +935,7 @@ U_BOOT_CMD(
        "mmc part - lists available partition on current mmc device\n"
        "mmc dev [dev] [part] - show or set current mmc device [partition]\n"
        "mmc list - lists available devices\n"
+#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
        "mmc hwpartition [args...] - does hardware partitioning\n"
        "  arguments (sizes in 512-byte blocks):\n"
        "    [user [enh start cnt] [wrrel {on|off}]] - sets user data area attributes\n"
@@ -942,6 +943,7 @@ U_BOOT_CMD(
        "    [check|set|complete] - mode, complete set partitioning completed\n"
        "  WARNING: Partitioning is a write-once setting once it is set to complete.\n"
        "  Power cycling is required to initialize partitions after set to complete.\n"
+#endif
 #ifdef CONFIG_SUPPORT_EMMC_BOOT
        "mmc bootbus dev boot_bus_width reset_boot_bus_width boot_mode\n"
        " - Set the BOOT_BUS_WIDTH field of the specified device\n"
@@ -953,7 +955,7 @@ U_BOOT_CMD(
        " - Change the RST_n_FUNCTION field of the specified device\n"
        "   WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.\n"
 #endif
-#ifdef CONFIG_SUPPORT_EMMC_RPMB
+#if CONFIG_IS_ENABLED(CMD_MMC_RPMB)
        "mmc rpmb read addr blk# cnt [address of auth-key] - block size is 256 bytes\n"
        "mmc rpmb write addr blk# cnt <address of auth-key> - block size is 256 bytes\n"
        "mmc rpmb key <address of auth-key> - program the RPMB authentication key.\n"