bootm: Disable interrupts only when loading

[u-boot] / common / board_r.c

diff --git a/common/board_r.c b/common/board_r.c
index 9605f80a0cbfb61523534bb9a11e0f0ef20fd428..f7a036e32f42e0adcbda61cebb566ee695dd2340 100644 (file)
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -58,6 +58,7 @@
 #include <serial.h>
 #include <spi.h>
 #include <stdio_dev.h>
+#include <trace.h>
 #include <watchdog.h>
 #ifdef CONFIG_ADDR_MAP
 #include <asm/mmu.h>
@@ -106,6 +107,15 @@ static int initr_secondary_cpu(void)
        return 0;
 }
 
+static int initr_trace(void)
+{
+#ifdef CONFIG_TRACE
+       trace_init(gd->trace_buff, CONFIG_TRACE_BUFFER_SIZE);
+#endif
+
+       return 0;
+}
+
 static int initr_reloc(void)
 {
        gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
@@ -136,8 +146,8 @@ static int initr_reloc_global_data(void)
 {
 #ifdef CONFIG_SYS_SYM_OFFSETS
        monitor_flash_len = _end_ofs;
-#else
-       monitor_flash_len = (ulong)&__init_end - gd->dest_addr;
+#elif !defined(CONFIG_SANDBOX)
+       monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
 #endif
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
        /*
@@ -145,7 +155,7 @@ static int initr_reloc_global_data(void)
         * We need to update it to point to the same CPU entry in RAM.
         * TODO: why not just add gd->reloc_ofs?
         */
-       gd->arch.cpu += gd->dest_addr - CONFIG_SYS_MONITOR_BASE;
+       gd->arch.cpu += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
 
        /*
         * If we didn't know the cpu mask & # cores, we can save them of
@@ -161,7 +171,7 @@ static int initr_reloc_global_data(void)
         * in SRAM mode and initialize that cache from SRAM mode back to being
         * a cache in cpu_init_r.
         */
-       gd->env_addr += gd->dest_addr - CONFIG_SYS_MONITOR_BASE;
+       gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
 #endif
        return 0;
 }
@@ -178,7 +188,7 @@ static int initr_trap(void)
        /*
         * Setup trap handlers
         */
-       trap_init(gd->dest_addr);
+       trap_init(gd->relocaddr);
 
        return 0;
 }
@@ -263,8 +273,9 @@ static int initr_malloc(void)
        ulong malloc_start;
 
        /* The malloc area is immediately below the monitor copy in DRAM */
-       malloc_start = gd->dest_addr - TOTAL_MALLOC_LEN;
-       mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN);
+       malloc_start = gd->relocaddr - TOTAL_MALLOC_LEN;
+       mem_malloc_init((ulong)map_sysmem(malloc_start, TOTAL_MALLOC_LEN),
+                       TOTAL_MALLOC_LEN);
        return 0;
 }
 
@@ -275,7 +286,7 @@ __weak int power_init_board(void)
 
 static int initr_announce(void)
 {
-       debug("Now running in RAM - U-Boot at: %08lx\n", gd->dest_addr);
+       debug("Now running in RAM - U-Boot at: %08lx\n", gd->relocaddr);
        return 0;
 }
 
@@ -691,6 +702,9 @@ static int initr_modem(void)
 
 static int run_main_loop(void)
 {
+#ifdef CONFIG_SANDBOX
+       sandbox_main_loop_init();
+#endif
        /* main_loop() can return to retry autoboot, if so just run it again */
        for (;;)
                main_loop();
@@ -707,6 +721,7 @@ static int run_main_loop(void)
  * TODO: perhaps reset the watchdog in the initcall function after each call?
  */
 init_fnc_t init_sequence_r[] = {
+       initr_trace,
        initr_reloc,
        /* TODO: could x86/PPC have this also perhaps? */
 #ifdef CONFIG_ARM
@@ -721,9 +736,6 @@ init_fnc_t init_sequence_r[] = {
         */
 #ifdef CONFIG_CLOCKS
        set_cpu_clk_info, /* Setup clock information */
-#endif
-#ifdef CONFIG_X86
-       init_bd_struct_r,
 #endif
        initr_reloc_global_data,
        initr_serial,
@@ -764,6 +776,7 @@ init_fnc_t init_sequence_r[] = {
 #endif
        initr_barrier,
        initr_malloc,
+       bootstage_relocate,
 #ifdef CONFIG_ARCH_EARLY_INIT_R
        arch_early_init_r,
 #endif