Merge with git://www.denx.de/git/u-boot.git

[u-boot] / common / cmd_i2c.c

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 45cfde2eb840aeb0585dc2abdf07ae03ea5c94de..755810d590419c4c5de528a1947a0111ca11d117 100644 (file)
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -701,6 +701,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        switch(data[2]) {
                case 2:  puts ("EDO\n");        break;
                case 4:  puts ("SDRAM\n");      break;
+               case 8:  puts ("DDR2\n");       break;
                default: puts ("unknown\n");    break;
        }
        puts ("Row address bits             ");
@@ -722,6 +723,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                case 2:  puts ("HSTL 1.5\n");   break;
                case 3:  puts ("SSTL 3.3\n");   break;
                case 4:  puts ("SSTL 2.5\n");   break;
+               case 5:  puts ("SSTL 1.8\n");   break;
                default: puts ("unknown\n");    break;
        }
        printf("SDRAM cycle time             %d.%d nS\n",
@@ -948,6 +950,26 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 /***************************************************/
 
+#if defined(CONFIG_I2C_CMD_TREE)
+U_BOOT_CMD(
+       i2c, 6, 1, do_i2c,
+       "i2c     - I2C sub-system\n",
+#if defined(CONFIG_I2C_MULTI_BUS)
+       "dev [dev] - show or set current I2C bus\n"
+#endif  /* CONFIG_I2C_MULTI_BUS */
+       "i2c speed [speed] - show or set I2C bus speed\n"
+       "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
+       "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
+       "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
+       "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
+       "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
+       "i2c probe - show devices on the I2C bus\n"
+       "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+       "i2c sdram chip - print SDRAM configuration information\n"
+#endif  /* CFG_CMD_SDRAM */
+);
+#endif /* CONFIG_I2C_CMD_TREE */
 U_BOOT_CMD(
        imd,    4,      1,      do_i2c_md,              \
        "imd     - i2c memory display\n",                               \
@@ -1003,25 +1025,4 @@ U_BOOT_CMD(
 );
 #endif
 
-#if defined(CONFIG_I2C_CMD_TREE)
-U_BOOT_CMD(
-       i2c, 6, 1, do_i2c,
-       "i2c     - I2C sub-system\n",
-#if defined(CONFIG_I2C_MULTI_BUS)
-       "dev [dev] - show or set current I2C bus\n"
-#endif  /* CONFIG_I2C_MULTI_BUS */
-       "i2c speed [speed] - show or set I2C bus speed\n"
-       "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
-       "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
-       "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
-       "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
-       "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-       "i2c probe - show devices on the I2C bus\n"
-       "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
-       "i2c sdram chip - print SDRAM configuration information\n"
-#endif  /* CFG_CMD_SDRAM */
-);
-#endif  /* CONFIG_I2C_CMD_TREE */
-
 #endif /* CFG_CMD_I2C */