mpc8323erdb: remove RTC and add EEPROM

[u-boot] / common / cmd_ide.c

diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 89fefed33d06fccdc535eefaad9a038d1626b621..c38be4f1a7d0d0c36335f44e6ab7e190326393c9 100644 (file)
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -31,6 +31,7 @@
 #include <command.h>
 #include <image.h>
 #include <asm/byteorder.h>
+#include <asm/io.h>
 
 #if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA)
 # include <pcmcia.h>
@@ -53,10 +54,6 @@
 
 #ifndef __PPC__
 #include <asm/io.h>
-#ifdef __MIPS__
-/* Macros depend on this variable */
-unsigned long mips_io_port_base = 0;
-#endif
 #endif
 
 #ifdef CONFIG_IDE_8xx_DIRECT
@@ -71,8 +68,6 @@ DECLARE_GLOBAL_DATA_PTR;
 # define SYNC          /* nothing */
 #endif
 
-#if defined(CONFIG_CMD_IDE)
-
 #ifdef CONFIG_IDE_8xx_DIRECT
 /* Timings for IDE Interface
  *
@@ -128,8 +123,6 @@ ulong ide_bus_offset[CFG_IDE_MAXBUS] = {
 };
 
 
-#define        ATA_CURR_BASE(dev)      (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
-
 #ifndef CONFIG_AMIGAONEG3SE
 static int ide_bus_ok[CFG_IDE_MAXBUS];
 #else
@@ -172,8 +165,8 @@ static uchar ide_wait  (int dev, ulong t);
 
 #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
 
-static void __inline__ ide_outb(int dev, int port, unsigned char val);
-static unsigned char __inline__ ide_inb(int dev, int port);
+void inline ide_outb(int dev, int port, unsigned char val);
+unsigned char inline ide_inb(int dev, int port);
 static void input_data(int dev, ulong *sect_buf, int words);
 static void output_data(int dev, ulong *sect_buf, int words);
 static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
@@ -805,45 +798,27 @@ set_pcmcia_timing (int pmode)
 
 /* ------------------------------------------------------------------------- */
 
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
-static void __inline__
-ide_outb(int dev, int port, unsigned char val)
+void inline
+__ide_outb(int dev, int port, unsigned char val)
 {
        debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
-               dev, port, val, (ATA_CURR_BASE(dev)+port));
-
-       /* Ensure I/O operations complete */
-       EIEIO;
-       *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val;
+               dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+       outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
 }
-#else  /* ! __PPC__ */
-static void __inline__
-ide_outb(int dev, int port, unsigned char val)
-{
-       outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
-}
-#endif /* __PPC__ */
+void inline ide_outb (int dev, int port, unsigned char val)
+               __attribute__((weak, alias("__ide_outb")));
 
-
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
-static unsigned char __inline__
-ide_inb(int dev, int port)
+unsigned char inline
+__ide_inb(int dev, int port)
 {
        uchar val;
-       /* Ensure I/O operations complete */
-       EIEIO;
-       val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+       val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
        debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
-               dev, port, (ATA_CURR_BASE(dev)+port), val);
-       return (val);
-}
-#else  /* ! __PPC__ */
-static unsigned char __inline__
-ide_inb(int dev, int port)
-{
-  return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
+               dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
+       return val;
 }
-#endif /* __PPC__ */
+unsigned char inline ide_inb(int dev, int port)
+                       __attribute__((weak, alias("__ide_inb")));
 
 #ifdef __PPC__
 # ifdef CONFIG_AMIGAONEG3SE
@@ -911,7 +886,7 @@ input_swap_data(int dev, ulong *sect_buf, int words)
 #endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
 
 
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
+#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) || defined(CONFIG_SH)
 static void
 output_data(int dev, ulong *sect_buf, int words)
 {
@@ -963,7 +938,7 @@ output_data(int dev, ulong *sect_buf, int words)
 }
 #endif /* __PPC__ */
 
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
+#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA) || defined(CONFIG_SH)
 static void
 input_data(int dev, ulong *sect_buf, int words)
 {
@@ -1155,9 +1130,9 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 
        input_swap_data (device, iobuf, ATA_SECTORWORDS);
 
-       ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
-       ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
-       ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
+       ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
+       ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
+       ident_cpy ((unsigned char*)dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
 #ifdef __LITTLE_ENDIAN
        /*
         * firmware revision and model number have Big Endian Byte
@@ -1972,9 +1947,9 @@ static void       atapi_inquiry(block_dev_desc_t * dev_desc)
                return;
 
        /* copy device ident strings */
-       ident_cpy(dev_desc->vendor,&iobuf[8],8);
-       ident_cpy(dev_desc->product,&iobuf[16],16);
-       ident_cpy(dev_desc->revision,&iobuf[32],5);
+       ident_cpy((unsigned char*)dev_desc->vendor,&iobuf[8],8);
+       ident_cpy((unsigned char*)dev_desc->product,&iobuf[16],16);
+       ident_cpy((unsigned char*)dev_desc->revision,&iobuf[32],5);
 
        dev_desc->lun=0;
        dev_desc->lba=0;
@@ -2104,5 +2079,3 @@ U_BOOT_CMD(
        "diskboot- boot from IDE device\n",
        "loadAddr dev:part\n"
 );
-
-#endif