#include <common.h>
#include <command.h>
-#if (CONFIG_COMMANDS & CFG_CMD_MMC)
-#include <mmc.h>
-#endif
#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif
+#include <watchdog.h>
-#if (CONFIG_COMMANDS & (CFG_CMD_MEMORY | \
- CFG_CMD_I2C | \
- CFG_CMD_ITEST | \
- CFG_CMD_PCI | \
- CMD_CMD_PORTIO ) )
-int cmd_get_data_size(char* arg, int default_size)
-{
- /* Check for a size specification .b, .w or .l.
- */
- int len = strlen(arg);
- if (len > 2 && arg[len-2] == '.') {
- switch(arg[len-1]) {
- case 'b':
- return 1;
- case 'w':
- return 2;
- case 'l':
- return 4;
- case 's':
- return -2;
- default:
- return -1;
- }
- }
- return default_size;
-}
-#endif
-
-#if (CONFIG_COMMANDS & CFG_CMD_MEMORY)
-
-#ifdef CMD_MEM_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-static int mod_mem(cmd_tbl_t *, int, int, int, char *[]);
+static int mod_mem(cmd_tbl_t *, int, int, int, char * const []);
/* Display values from last command.
* Memory modify remembered values are different from display memory.
*/
-uint dp_last_addr, dp_last_size;
-uint dp_last_length = 0x40;
-uint mm_last_addr, mm_last_size;
+static uint dp_last_addr, dp_last_size;
+static uint dp_last_length = 0x40;
+static uint mm_last_addr, mm_last_size;
static ulong base_address = 0;
* md{.b, .w, .l} {addr} {len}
*/
#define DISP_LINE_LEN 16
-int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length;
- ulong i, nbytes, linebytes;
- u_char *cp;
+#if defined(CONFIG_HAS_DATAFLASH)
+ ulong nbytes, linebytes;
+#endif
int size;
int rc = 0;
size = dp_last_size;
length = dp_last_length;
- if (argc < 2) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if (argc < 2)
+ return CMD_RET_USAGE;
if ((flag & CMD_FLAG_REPEAT) == 0) {
/* New command specified. Check for a size specification.
length = simple_strtoul(argv[2], NULL, 16);
}
+#if defined(CONFIG_HAS_DATAFLASH)
/* Print the lines.
*
* We buffer all read data, so we can make sure data is read only
nbytes = length * size;
do {
char linebuf[DISP_LINE_LEN];
- uint *uip = (uint *)linebuf;
- ushort *usp = (ushort *)linebuf;
- u_char *ucp = (u_char *)linebuf;
-#ifdef CONFIG_HAS_DATAFLASH
- int rc;
-#endif
- printf("%08lx:", addr);
+ void* p;
linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
-#ifdef CONFIG_HAS_DATAFLASH
- if ((rc = read_dataflash(addr, (linebytes/size)*size, linebuf)) == DATAFLASH_OK){
- /* if outside dataflash */
- /*if (rc != 1) {
- dataflash_perror (rc);
- return (1);
- }*/
- for (i=0; i<linebytes; i+= size) {
- if (size == 4) {
- printf(" %08x", *uip++);
- } else if (size == 2) {
- printf(" %04x", *usp++);
- } else {
- printf(" %02x", *ucp++);
- }
- addr += size;
- }
+ rc = read_dataflash(addr, (linebytes/size)*size, linebuf);
+ p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr;
+ print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size);
- } else { /* addr does not correspond to DataFlash */
-#endif
- for (i=0; i<linebytes; i+= size) {
- if (size == 4) {
- printf(" %08x", (*uip++ = *((uint *)addr)));
- } else if (size == 2) {
- printf(" %04x", (*usp++ = *((ushort *)addr)));
- } else {
- printf(" %02x", (*ucp++ = *((u_char *)addr)));
- }
- addr += size;
- }
-#ifdef CONFIG_HAS_DATAFLASH
- }
-#endif
- puts (" ");
- cp = linebuf;
- for (i=0; i<linebytes; i++) {
- if ((*cp < 0x20) || (*cp > 0x7e))
- putc ('.');
- else
- printf("%c", *cp);
- cp++;
- }
- putc ('\n');
nbytes -= linebytes;
+ addr += linebytes;
if (ctrlc()) {
rc = 1;
break;
}
} while (nbytes > 0);
+#else
+
+# if defined(CONFIG_BLACKFIN)
+ /* See if we're trying to display L1 inst */
+ if (addr_bfin_on_chip_mem(addr)) {
+ char linebuf[DISP_LINE_LEN];
+ ulong linebytes, nbytes = length * size;
+ do {
+ linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
+ memcpy(linebuf, (void *)addr, linebytes);
+ print_buffer(addr, linebuf, size, linebytes/size, DISP_LINE_LEN/size);
+
+ nbytes -= linebytes;
+ addr += linebytes;
+ if (ctrlc()) {
+ rc = 1;
+ break;
+ }
+ } while (nbytes > 0);
+ } else
+# endif
+
+ {
+ /* Print the lines. */
+ print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
+ addr += size*length;
+ }
+#endif
dp_last_addr = addr;
dp_last_length = length;
return (rc);
}
-int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 1, flag, argc, argv);
}
-int do_mem_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 0, flag, argc, argv);
}
-int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, writeval, count;
int size;
- if ((argc < 3) || (argc > 4)) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if ((argc < 3) || (argc > 4))
+ return CMD_RET_USAGE;
/* Check for size specification.
*/
return 0;
}
-int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+#ifdef CONFIG_MX_CYCLIC
+int do_mem_mdc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int i;
+ ulong count;
+
+ if (argc < 4)
+ return CMD_RET_USAGE;
+
+ count = simple_strtoul(argv[3], NULL, 10);
+
+ for (;;) {
+ do_mem_md (NULL, 0, 3, argv);
+
+ /* delay for <count> ms... */
+ for (i=0; i<count; i++)
+ udelay (1000);
+
+ /* check for ctrl-c to abort... */
+ if (ctrlc()) {
+ puts("Abort\n");
+ return 0;
+ }
+ }
+
+ return 0;
+}
+
+int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int i;
+ ulong count;
+
+ if (argc < 4)
+ return CMD_RET_USAGE;
+
+ count = simple_strtoul(argv[3], NULL, 10);
+
+ for (;;) {
+ do_mem_mw (NULL, 0, 3, argv);
+
+ /* delay for <count> ms... */
+ for (i=0; i<count; i++)
+ udelay (1000);
+
+ /* check for ctrl-c to abort... */
+ if (ctrlc()) {
+ puts("Abort\n");
+ return 0;
+ }
+ }
+
+ return 0;
+}
+#endif /* CONFIG_MX_CYCLIC */
+
+int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr1, addr2, count, ngood;
int size;
int rcode = 0;
+ const char *type;
- if (argc != 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if (argc != 4)
+ return CMD_RET_USAGE;
/* Check for size specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
+ type = size == 4 ? "word" : size == 2 ? "halfword" : "byte";
addr1 = simple_strtoul(argv[1], NULL, 16);
addr1 += base_address;
}
#endif
- ngood = 0;
+#ifdef CONFIG_BLACKFIN
+ if (addr_bfin_on_chip_mem(addr1) || addr_bfin_on_chip_mem(addr2)) {
+ puts ("Comparison with L1 instruction memory not supported.\n\r");
+ return 0;
+ }
+#endif
- while (count-- > 0) {
+ for (ngood = 0; ngood < count; ++ngood) {
+ ulong word1, word2;
if (size == 4) {
- ulong word1 = *(ulong *)addr1;
- ulong word2 = *(ulong *)addr2;
- if (word1 != word2) {
- printf("word at 0x%08lx (0x%08lx) "
- "!= word at 0x%08lx (0x%08lx)\n",
- addr1, word1, addr2, word2);
- rcode = 1;
- break;
- }
+ word1 = *(ulong *)addr1;
+ word2 = *(ulong *)addr2;
+ } else if (size == 2) {
+ word1 = *(ushort *)addr1;
+ word2 = *(ushort *)addr2;
+ } else {
+ word1 = *(u_char *)addr1;
+ word2 = *(u_char *)addr2;
}
- else if (size == 2) {
- ushort hword1 = *(ushort *)addr1;
- ushort hword2 = *(ushort *)addr2;
- if (hword1 != hword2) {
- printf("halfword at 0x%08lx (0x%04x) "
- "!= halfword at 0x%08lx (0x%04x)\n",
- addr1, hword1, addr2, hword2);
- rcode = 1;
- break;
- }
- }
- else {
- u_char byte1 = *(u_char *)addr1;
- u_char byte2 = *(u_char *)addr2;
- if (byte1 != byte2) {
- printf("byte at 0x%08lx (0x%02x) "
- "!= byte at 0x%08lx (0x%02x)\n",
- addr1, byte1, addr2, byte2);
- rcode = 1;
- break;
- }
+ if (word1 != word2) {
+ printf("%s at 0x%08lx (%#0*lx) != %s at 0x%08lx (%#0*lx)\n",
+ type, addr1, size, word1,
+ type, addr2, size, word2);
+ rcode = 1;
+ break;
}
- ngood++;
+
addr1 += size;
addr2 += size;
+
+ /* reset watchdog from time to time */
+ if ((ngood % (64 << 10)) == 0)
+ WATCHDOG_RESET();
}
- printf("Total of %ld %s%s were the same\n",
- ngood, size == 4 ? "word" : size == 2 ? "halfword" : "byte",
- ngood == 1 ? "" : "s");
+ printf("Total of %ld %s(s) were the same\n", ngood, type);
return rcode;
}
-int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, dest, count;
int size;
- if (argc != 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if (argc != 4)
+ return CMD_RET_USAGE;
/* Check for size specification.
*/
return 1;
}
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
/* check if we are copying to Flash */
if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
- && (!addr_dataflash(addr))
+ && (!addr_dataflash(dest))
#endif
) {
int rc;
puts ("Copy to Flash... ");
- rc = flash_write ((uchar *)addr, dest, count*size);
+ rc = flash_write ((char *)addr, dest, count*size);
if (rc != 0) {
flash_perror (rc);
return (1);
}
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_MMC)
- if (mmc2info(dest)) {
- int rc;
-
- puts ("Copy to MMC... ");
- switch (rc = mmc_write ((uchar *)addr, dest, count*size)) {
- case 0:
- putc ('\n');
- return 1;
- case -1:
- puts ("failed\n");
- return 1;
- default:
- printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
- return 1;
- }
- puts ("done\n");
- return 0;
- }
-
- if (mmc2info(addr)) {
- int rc;
-
- puts ("Copy from MMC... ");
- switch (rc = mmc_read (addr, (uchar *)dest, count*size)) {
- case 0:
- putc ('\n');
- return 1;
- case -1:
- puts ("failed\n");
- return 1;
- default:
- printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
- return 1;
- }
- puts ("done\n");
- return 0;
- }
-#endif
-
#ifdef CONFIG_HAS_DATAFLASH
/* Check if we are copying from RAM or Flash to DataFlash */
if (addr_dataflash(dest) && !addr_dataflash(addr)){
}
/* Check if we are copying from DataFlash to RAM */
- if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
+ if (addr_dataflash(addr) && !addr_dataflash(dest)
+#ifndef CONFIG_SYS_NO_FLASH
+ && (addr2info(dest) == NULL)
+#endif
+ ){
int rc;
rc = read_dataflash(addr, count * size, (char *) dest);
if (rc != 1) {
}
#endif
+#ifdef CONFIG_BLACKFIN
+ /* See if we're copying to/from L1 inst */
+ if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
+ memcpy((void *)dest, (void *)addr, count * size);
+ return 0;
+ }
+#endif
+
while (count-- > 0) {
if (size == 4)
*((ulong *)dest) = *((ulong *)addr);
*((u_char *)dest) = *((u_char *)addr);
addr += size;
dest += size;
+
+ /* reset watchdog from time to time */
+ if ((count % (64 << 10)) == 0)
+ WATCHDOG_RESET();
}
return 0;
}
-int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc > 1) {
/* Set new base address.
return 0;
}
-int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- ulong addr, length, i, junk;
+ ulong addr, length, i;
int size;
volatile uint *longp;
volatile ushort *shortp;
volatile u_char *cp;
- if (argc < 3) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if (argc < 3)
+ return CMD_RET_USAGE;
/* Check for a size spefication.
* Defaults to long if no or incorrect specification.
longp = (uint *)addr;
i = length;
while (i-- > 0)
- junk = *longp++;
+ *longp++;
}
}
if (size == 2) {
shortp = (ushort *)addr;
i = length;
while (i-- > 0)
- junk = *shortp++;
+ *shortp++;
}
}
for (;;) {
cp = (u_char *)addr;
i = length;
while (i-- > 0)
- junk = *cp++;
+ *cp++;
}
}
+#ifdef CONFIG_LOOPW
+int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong addr, length, i, data;
+ int size;
+ volatile uint *longp;
+ volatile ushort *shortp;
+ volatile u_char *cp;
+
+ if (argc < 4)
+ return CMD_RET_USAGE;
+
+ /* Check for a size spefication.
+ * Defaults to long if no or incorrect specification.
+ */
+ if ((size = cmd_get_data_size(argv[0], 4)) < 0)
+ return 1;
+
+ /* Address is always specified.
+ */
+ addr = simple_strtoul(argv[1], NULL, 16);
+
+ /* Length is the number of objects, not number of bytes.
+ */
+ length = simple_strtoul(argv[2], NULL, 16);
+
+ /* data to write */
+ data = simple_strtoul(argv[3], NULL, 16);
+
+ /* We want to optimize the loops to run as fast as possible.
+ * If we have only one object, just run infinite loops.
+ */
+ if (length == 1) {
+ if (size == 4) {
+ longp = (uint *)addr;
+ for (;;)
+ *longp = data;
+ }
+ if (size == 2) {
+ shortp = (ushort *)addr;
+ for (;;)
+ *shortp = data;
+ }
+ cp = (u_char *)addr;
+ for (;;)
+ *cp = data;
+ }
+
+ if (size == 4) {
+ for (;;) {
+ longp = (uint *)addr;
+ i = length;
+ while (i-- > 0)
+ *longp++ = data;
+ }
+ }
+ if (size == 2) {
+ for (;;) {
+ shortp = (ushort *)addr;
+ i = length;
+ while (i-- > 0)
+ *shortp++ = data;
+ }
+ }
+ for (;;) {
+ cp = (u_char *)addr;
+ i = length;
+ while (i-- > 0)
+ *cp++ = data;
+ }
+}
+#endif /* CONFIG_LOOPW */
+
/*
* Perform a memory test. A more complete alternative test can be
- * configured using CFG_ALT_MEMTEST. The complete test loops until
+ * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
* interrupted by ctrl-c or by a failure of one of the sub-tests.
*/
-int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
vu_long *addr, *start, *end;
ulong val;
ulong readback;
+ ulong errs = 0;
+ int iterations = 1;
+ int iteration_limit;
-#if defined(CFG_ALT_MEMTEST)
- vu_long addr_mask;
+#if defined(CONFIG_SYS_ALT_MEMTEST)
+ vu_long len;
vu_long offset;
vu_long test_offset;
vu_long pattern;
vu_long temp;
vu_long anti_pattern;
vu_long num_words;
-#if defined(CFG_MEMTEST_SCRATCH)
- vu_long *dummy = (vu_long*)CFG_MEMTEST_SCRATCH;
+#if defined(CONFIG_SYS_MEMTEST_SCRATCH)
+ vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH;
#else
- vu_long *dummy = NULL;
+ vu_long *dummy = 0; /* yes, this is address 0x0, not NULL */
#endif
int j;
- int iterations = 1;
static const ulong bitpattern[] = {
0x00000001, /* single bit */
#else
ulong incr;
ulong pattern;
- int rcode = 0;
#endif
- if (argc > 1) {
+ if (argc > 1)
start = (ulong *)simple_strtoul(argv[1], NULL, 16);
- } else {
- start = (ulong *)CFG_MEMTEST_START;
- }
+ else
+ start = (ulong *)CONFIG_SYS_MEMTEST_START;
- if (argc > 2) {
+ if (argc > 2)
end = (ulong *)simple_strtoul(argv[2], NULL, 16);
- } else {
- end = (ulong *)(CFG_MEMTEST_END);
- }
+ else
+ end = (ulong *)(CONFIG_SYS_MEMTEST_END);
- if (argc > 3) {
+ if (argc > 3)
pattern = (ulong)simple_strtoul(argv[3], NULL, 16);
- } else {
+ else
pattern = 0;
- }
-#if defined(CFG_ALT_MEMTEST)
+ if (argc > 4)
+ iteration_limit = (ulong)simple_strtoul(argv[4], NULL, 16);
+ else
+ iteration_limit = 0;
+
+#if defined(CONFIG_SYS_ALT_MEMTEST)
printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end);
- PRINTF("%s:%d: start 0x%p end 0x%p\n",
+ debug("%s:%d: start 0x%p end 0x%p\n",
__FUNCTION__, __LINE__, start, end);
for (;;) {
return 1;
}
+
+ if (iteration_limit && iterations > iteration_limit) {
+ printf("Tested %d iteration(s) with %lu errors.\n",
+ iterations-1, errs);
+ return errs != 0;
+ }
+
printf("Iteration: %6d\r", iterations);
- PRINTF("Iteration: %6d\n", iterations);
+ debug("\n");
iterations++;
/*
*dummy = ~val; /* clear the test data off of the bus */
readback = *addr;
if(readback != val) {
- printf ("FAILURE (data line): "
+ printf ("FAILURE (data line): "
"expected %08lx, actual %08lx\n",
val, readback);
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
*addr = ~val;
*dummy = val;
if(readback != ~val) {
printf ("FAILURE (data line): "
"Is %08lx, should be %08lx\n",
- val, readback);
+ readback, ~val);
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
}
}
* all possible.
*
* Returns: 0 if the test succeeds, 1 if the test fails.
- *
- * ## NOTE ## Be sure to specify start and end
- * addresses such that addr_mask has
- * lots of bits set. For example an
- * address range of 01000000 02000000 is
- * bad while a range of 01000000
- * 01ffffff is perfect.
*/
- addr_mask = ((ulong)end - (ulong)start)/sizeof(vu_long);
+ len = ((ulong)end - (ulong)start)/sizeof(vu_long);
pattern = (vu_long) 0xaaaaaaaa;
anti_pattern = (vu_long) 0x55555555;
- PRINTF("%s:%d: addr mask = 0x%.8lx\n",
+ debug("%s:%d: length = 0x%.8lx\n",
__FUNCTION__, __LINE__,
- addr_mask);
+ len);
/*
* Write the default pattern at each of the
* power-of-two offsets.
*/
- for (offset = 1; (offset & addr_mask) != 0; offset <<= 1) {
+ for (offset = 1; offset < len; offset <<= 1) {
start[offset] = pattern;
}
test_offset = 0;
start[test_offset] = anti_pattern;
- for (offset = 1; (offset & addr_mask) != 0; offset <<= 1) {
+ for (offset = 1; offset < len; offset <<= 1) {
temp = start[offset];
if (temp != pattern) {
printf ("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx\n",
(ulong)&start[offset], pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
}
start[test_offset] = pattern;
+ WATCHDOG_RESET();
/*
* Check for addr bits stuck low or shorted.
*/
- for (test_offset = 1; (test_offset & addr_mask) != 0; test_offset <<= 1) {
+ for (test_offset = 1; test_offset < len; test_offset <<= 1) {
start[test_offset] = anti_pattern;
- for (offset = 1; (offset & addr_mask) != 0; offset <<= 1) {
+ for (offset = 1; offset < len; offset <<= 1) {
temp = start[offset];
if ((temp != pattern) && (offset != test_offset)) {
printf ("\nFAILURE: Address bit stuck low or shorted @"
" 0x%.8lx: expected 0x%.8lx, actual 0x%.8lx\n",
(ulong)&start[offset], pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
}
start[test_offset] = pattern;
* Fill memory with a known pattern.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
start[offset] = pattern;
}
* Check each location and invert it for the second pass.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
temp = start[offset];
if (temp != pattern) {
printf ("\nFAILURE (read/write) @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
(ulong)&start[offset], pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
anti_pattern = ~pattern;
* Check each location for the inverted pattern and zero it.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
anti_pattern = ~pattern;
temp = start[offset];
if (temp != anti_pattern) {
printf ("\nFAILURE (read/write): @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
(ulong)&start[offset], anti_pattern, temp);
- return 1;
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
start[offset] = 0;
}
return 1;
}
+ if (iteration_limit && iterations > iteration_limit) {
+ printf("Tested %d iteration(s) with %lu errors.\n",
+ iterations-1, errs);
+ return errs != 0;
+ }
+ ++iterations;
+
printf ("\rPattern %08lX Writing..."
"%12s"
"\b\b\b\b\b\b\b\b\b\b",
pattern, "");
for (addr=start,val=pattern; addr<end; addr++) {
+ WATCHDOG_RESET();
*addr = val;
val += incr;
}
puts ("Reading...");
for (addr=start,val=pattern; addr<end; addr++) {
+ WATCHDOG_RESET();
readback = *addr;
if (readback != val) {
printf ("\nMem error @ 0x%08X: "
"found %08lX, expected %08lX\n",
- (uint)addr, readback, val);
- rcode = 1;
+ (uint)(uintptr_t)addr, readback, val);
+ errs++;
+ if (ctrlc()) {
+ putc ('\n');
+ return 1;
+ }
}
val += incr;
}
}
incr = -incr;
}
- return rcode;
#endif
+ return 0; /* not reached */
}
* nm{.b, .w, .l} {addr}
*/
static int
-mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
+mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
{
ulong addr, i;
int nbytes, size;
- extern char console_buffer[];
- if (argc != 2) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if (argc != 2)
+ return CMD_RET_USAGE;
#ifdef CONFIG_BOOT_RETRY_TIME
reset_cmd_timeout(); /* got a good command to get here */
}
#endif
+#ifdef CONFIG_BLACKFIN
+ if (addr_bfin_on_chip_mem(addr)) {
+ puts ("Can't modify L1 instruction in place. Use cp instead.\n\r");
+ return 0;
+ }
+#endif
+
/* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
return 0;
}
+#ifdef CONFIG_CMD_CRC32
+
#ifndef CONFIG_CRC32_VERIFY
-int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length;
ulong crc;
ulong *ptr;
- if (argc < 3) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ if (argc < 3)
+ return CMD_RET_USAGE;
addr = simple_strtoul (argv[1], NULL, 16);
addr += base_address;
length = simple_strtoul (argv[2], NULL, 16);
- crc = crc32 (0, (const uchar *) addr, length);
+ crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
printf ("CRC32 for %08lx ... %08lx ==> %08lx\n",
addr, addr + length - 1, crc);
#else /* CONFIG_CRC32_VERIFY */
-int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length;
ulong crc;
ulong vcrc;
int verify;
int ac;
- char **av;
+ char * const *av;
if (argc < 3) {
- usage:
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
+usage:
+ return CMD_RET_USAGE;
}
av = argv + 1;
addr += base_address;
length = simple_strtoul(*av++, NULL, 16);
- crc = crc32(0, (const uchar *) addr, length);
+ crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
if (!verify) {
printf ("CRC32 for %08lx ... %08lx ==> %08lx\n",
}
#endif /* CONFIG_CRC32_VERIFY */
+#endif
+
/**************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_MEMORY)
U_BOOT_CMD(
- md, 3, 1, do_mem_md,
- "md - memory display\n",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ md, 3, 1, do_mem_md,
+ "memory display",
+ "[.b, .w, .l] address [# of objects]"
);
U_BOOT_CMD(
- mm, 2, 1, do_mem_mm,
- "mm - memory modify (auto-incrementing)\n",
- "[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
+ mm, 2, 1, do_mem_mm,
+ "memory modify (auto-incrementing address)",
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
- nm, 2, 1, do_mem_nm,
- "nm - memory modify (constant address)\n",
- "[.b, .w, .l] address\n - memory modify, read and keep address\n"
+ nm, 2, 1, do_mem_nm,
+ "memory modify (constant address)",
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
- mw, 4, 1, do_mem_mw,
- "mw - memory write (fill)\n",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ mw, 4, 1, do_mem_mw,
+ "memory write (fill)",
+ "[.b, .w, .l] address value [count]"
);
U_BOOT_CMD(
- cp, 4, 1, do_mem_cp,
- "cp - memory copy\n",
- "[.b, .w, .l] source target count\n - copy memory\n"
+ cp, 4, 1, do_mem_cp,
+ "memory copy",
+ "[.b, .w, .l] source target count"
);
U_BOOT_CMD(
- cmp, 4, 1, do_mem_cmp,
- "cmp - memory compare\n",
- "[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
+ cmp, 4, 1, do_mem_cmp,
+ "memory compare",
+ "[.b, .w, .l] addr1 addr2 count"
);
+#ifdef CONFIG_CMD_CRC32
+
#ifndef CONFIG_CRC32_VERIFY
U_BOOT_CMD(
- crc32, 4, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
- "address count [addr]\n - compute CRC32 checksum [save at addr]\n"
+ crc32, 4, 1, do_mem_crc,
+ "checksum calculation",
+ "address count [addr]\n - compute CRC32 checksum [save at addr]"
);
#else /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
- crc32, 5, 1, do_mem_crc,
- "crc32 - checksum calculation\n",
+ crc32, 5, 1, do_mem_crc,
+ "checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
- "-v address count crc\n - verify crc of memory area\n"
+ "-v address count crc\n - verify crc of memory area"
);
#endif /* CONFIG_CRC32_VERIFY */
+#endif
+
U_BOOT_CMD(
- base, 2, 1, do_mem_base,
- "base - print or set address offset\n",
+ base, 2, 1, do_mem_base,
+ "print or set address offset",
"\n - print address offset for memory commands\n"
- "base off\n - set address offset for memory commands to 'off'\n"
+ "base off\n - set address offset for memory commands to 'off'"
);
U_BOOT_CMD(
- loop, 3, 1, do_mem_loop,
- "loop - infinite loop on address range\n",
- "[.b, .w, .l] address number_of_objects\n"
- " - loop on a set of addresses\n"
+ loop, 3, 1, do_mem_loop,
+ "infinite loop on address range",
+ "[.b, .w, .l] address number_of_objects"
);
+#ifdef CONFIG_LOOPW
U_BOOT_CMD(
- mtest, 4, 1, do_mem_mtest,
- "mtest - simple RAM test\n",
- "[start [end [pattern]]]\n"
- " - simple RAM read/write test\n"
+ loopw, 4, 1, do_mem_loopw,
+ "infinite write loop on address range",
+ "[.b, .w, .l] address number_of_objects data_to_write"
);
+#endif /* CONFIG_LOOPW */
-#endif
-#endif /* CFG_CMD_MEMORY */
+U_BOOT_CMD(
+ mtest, 5, 1, do_mem_mtest,
+ "simple RAM read/write test",
+ "[start [end [pattern [iterations]]]]"
+);
+
+#ifdef CONFIG_MX_CYCLIC
+U_BOOT_CMD(
+ mdc, 4, 1, do_mem_mdc,
+ "memory display cyclic",
+ "[.b, .w, .l] address count delay(ms)"
+);
+
+U_BOOT_CMD(
+ mwc, 4, 1, do_mem_mwc,
+ "memory write cyclic",
+ "[.b, .w, .l] address value delay(ms)"
+);
+#endif /* CONFIG_MX_CYCLIC */