#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif
+#include <hash.h>
#include <watchdog.h>
#include <asm/io.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
+#ifndef CONFIG_SYS_MEMTEST_SCRATCH
+#define CONFIG_SYS_MEMTEST_SCRATCH 0
+#endif
+
static int mod_mem(cmd_tbl_t *, int, int, int, char * const []);
/* Display values from last command.
}
#endif /* CONFIG_LOOPW */
-static int mem_test_alt(vu_long *start, vu_long *end,
- int iteration_limit)
+#ifdef CONFIG_CMD_MEMTEST
+static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr,
+ vu_long *dummy)
{
vu_long *addr;
- int iterations = 1;
ulong errs = 0;
ulong val, readback;
int j;
- vu_long len;
vu_long offset;
vu_long test_offset;
vu_long pattern;
vu_long temp;
vu_long anti_pattern;
vu_long num_words;
-#if defined(CONFIG_SYS_MEMTEST_SCRATCH)
- vu_long *dummy = (vu_long *)CONFIG_SYS_MEMTEST_SCRATCH;
-#else
- vu_long *dummy = NULL; /* yes, this is address 0x0, not NULL */
-#endif
static const ulong bitpattern[] = {
0x00000001, /* single bit */
0x00000003, /* two adjacent bits */
0xaaaaaaaa, /* alternating 1/0 */
};
- printf("Testing %08x ... %08x:\n", (uint)(uintptr_t)start,
- (uint)(uintptr_t)end);
- debug("%s:%d: start 0x%p end 0x%p\n",
- __func__, __LINE__, start, end);
-
- for (;;) {
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
-
- if (iteration_limit && iterations > iteration_limit) {
- printf("Tested %d iteration(s) with %lu errors.\n",
- iterations-1, errs);
- return errs != 0;
- }
+ num_words = (end_addr - start_addr) / sizeof(vu_long);
- printf("Iteration: %6d\r", iterations);
- debug("\n");
- iterations++;
-
- /*
- * Data line test: write a pattern to the first
- * location, write the 1's complement to a 'parking'
- * address (changes the state of the data bus so a
- * floating bus doesn't give a false OK), and then
- * read the value back. Note that we read it back
- * into a variable because the next time we read it,
- * it might be right (been there, tough to explain to
- * the quality guys why it prints a failure when the
- * "is" and "should be" are obviously the same in the
- * error message).
- *
- * Rather than exhaustively testing, we test some
- * patterns by shifting '1' bits through a field of
- * '0's and '0' bits through a field of '1's (i.e.
- * pattern and ~pattern).
- */
- addr = start;
- for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]);
- j++) {
- val = bitpattern[j];
- for (; val != 0; val <<= 1) {
- *addr = val;
+ /*
+ * Data line test: write a pattern to the first
+ * location, write the 1's complement to a 'parking'
+ * address (changes the state of the data bus so a
+ * floating bus doesn't give a false OK), and then
+ * read the value back. Note that we read it back
+ * into a variable because the next time we read it,
+ * it might be right (been there, tough to explain to
+ * the quality guys why it prints a failure when the
+ * "is" and "should be" are obviously the same in the
+ * error message).
+ *
+ * Rather than exhaustively testing, we test some
+ * patterns by shifting '1' bits through a field of
+ * '0's and '0' bits through a field of '1's (i.e.
+ * pattern and ~pattern).
+ */
+ addr = buf;
+ for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]); j++) {
+ val = bitpattern[j];
+ for (; val != 0; val <<= 1) {
+ *addr = val;
*dummy = ~val; /* clear the test data off the bus */
readback = *addr;
- if(readback != val) {
+ if (readback != val) {
printf("FAILURE (data line): "
"expected %08lx, actual %08lx\n",
val, readback);
errs++;
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
+ if (ctrlc())
+ return -1;
}
*addr = ~val;
*dummy = val;
"Is %08lx, should be %08lx\n",
readback, ~val);
errs++;
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
+ if (ctrlc())
+ return -1;
}
- }
}
+ }
- /*
- * Based on code whose Original Author and Copyright
- * information follows: Copyright (c) 1998 by Michael
- * Barr. This software is placed into the public
- * domain and may be used for any purpose. However,
- * this notice must not be changed or removed and no
- * warranty is either expressed or implied by its
- * publication or distribution.
- */
+ /*
+ * Based on code whose Original Author and Copyright
+ * information follows: Copyright (c) 1998 by Michael
+ * Barr. This software is placed into the public
+ * domain and may be used for any purpose. However,
+ * this notice must not be changed or removed and no
+ * warranty is either expressed or implied by its
+ * publication or distribution.
+ */
- /*
- * Address line test
- *
- * Description: Test the address bus wiring in a
- * memory region by performing a walking
- * 1's test on the relevant bits of the
- * address and checking for aliasing.
- * This test will find single-bit
- * address failures such as stuck-high,
- * stuck-low, and shorted pins. The base
- * address and size of the region are
- * selected by the caller.
- *
- * Notes: For best results, the selected base
- * address should have enough LSB 0's to
- * guarantee single address bit changes.
- * For example, to test a 64-Kbyte
- * region, select a base address on a
- * 64-Kbyte boundary. Also, select the
- * region size as a power-of-two if at
- * all possible.
- *
- * Returns: 0 if the test succeeds, 1 if the test fails.
- */
- len = ((ulong)end - (ulong)start)/sizeof(vu_long);
- pattern = (vu_long) 0xaaaaaaaa;
- anti_pattern = (vu_long) 0x55555555;
+ /*
+ * Address line test
+
+ * Description: Test the address bus wiring in a
+ * memory region by performing a walking
+ * 1's test on the relevant bits of the
+ * address and checking for aliasing.
+ * This test will find single-bit
+ * address failures such as stuck-high,
+ * stuck-low, and shorted pins. The base
+ * address and size of the region are
+ * selected by the caller.
+
+ * Notes: For best results, the selected base
+ * address should have enough LSB 0's to
+ * guarantee single address bit changes.
+ * For example, to test a 64-Kbyte
+ * region, select a base address on a
+ * 64-Kbyte boundary. Also, select the
+ * region size as a power-of-two if at
+ * all possible.
+ *
+ * Returns: 0 if the test succeeds, 1 if the test fails.
+ */
+ pattern = (vu_long) 0xaaaaaaaa;
+ anti_pattern = (vu_long) 0x55555555;
- debug("%s:%d: length = 0x%.8lx\n",
- __func__, __LINE__, len);
- /*
- * Write the default pattern at each of the
- * power-of-two offsets.
- */
- for (offset = 1; offset < len; offset <<= 1)
- start[offset] = pattern;
+ debug("%s:%d: length = 0x%.8lx\n", __func__, __LINE__, num_words);
+ /*
+ * Write the default pattern at each of the
+ * power-of-two offsets.
+ */
+ for (offset = 1; offset < num_words; offset <<= 1)
+ addr[offset] = pattern;
- /*
- * Check for address bits stuck high.
- */
- test_offset = 0;
- start[test_offset] = anti_pattern;
+ /*
+ * Check for address bits stuck high.
+ */
+ test_offset = 0;
+ addr[test_offset] = anti_pattern;
- for (offset = 1; offset < len; offset <<= 1) {
- temp = start[offset];
- if (temp != pattern) {
+ for (offset = 1; offset < num_words; offset <<= 1) {
+ temp = addr[offset];
+ if (temp != pattern) {
printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx\n",
- (ulong)&start[offset], pattern, temp);
+ start_addr + offset, pattern, temp);
errs++;
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
- }
+ if (ctrlc())
+ return -1;
}
- start[test_offset] = pattern;
- WATCHDOG_RESET();
+ }
+ addr[test_offset] = pattern;
+ WATCHDOG_RESET();
- /*
- * Check for addr bits stuck low or shorted.
- */
- for (test_offset = 1; test_offset < len; test_offset <<= 1) {
- start[test_offset] = anti_pattern;
+ /*
+ * Check for addr bits stuck low or shorted.
+ */
+ for (test_offset = 1; test_offset < num_words; test_offset <<= 1) {
+ addr[test_offset] = anti_pattern;
- for (offset = 1; offset < len; offset <<= 1) {
- temp = start[offset];
+ for (offset = 1; offset < num_words; offset <<= 1) {
+ temp = addr[offset];
if ((temp != pattern) && (offset != test_offset)) {
- printf("\nFAILURE: Address bit stuck low or shorted @"
- " 0x%.8lx: expected 0x%.8lx, actual 0x%.8lx\n",
- (ulong)&start[offset], pattern, temp);
- errs++;
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
+ printf("\nFAILURE: Address bit stuck low or"
+ " shorted @ 0x%.8lx: expected 0x%.8lx,"
+ " actual 0x%.8lx\n",
+ start_addr + offset, pattern, temp);
+ errs++;
+ if (ctrlc())
+ return -1;
}
- }
- start[test_offset] = pattern;
}
+ addr[test_offset] = pattern;
+ }
- /*
- * Description: Test the integrity of a physical
- * memory device by performing an
- * increment/decrement test over the
- * entire region. In the process every
- * storage bit in the device is tested
- * as a zero and a one. The base address
- * and the size of the region are
- * selected by the caller.
- *
- * Returns: 0 if the test succeeds, 1 if the test fails.
- */
- num_words = ((ulong)end - (ulong)start)/sizeof(vu_long) + 1;
+ /*
+ * Description: Test the integrity of a physical
+ * memory device by performing an
+ * increment/decrement test over the
+ * entire region. In the process every
+ * storage bit in the device is tested
+ * as a zero and a one. The base address
+ * and the size of the region are
+ * selected by the caller.
+ *
+ * Returns: 0 if the test succeeds, 1 if the test fails.
+ */
+ num_words++;
- /*
- * Fill memory with a known pattern.
- */
- for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
- WATCHDOG_RESET();
- start[offset] = pattern;
- }
+ /*
+ * Fill memory with a known pattern.
+ */
+ for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
+ addr[offset] = pattern;
+ }
- /*
- * Check each location and invert it for the second pass.
- */
- for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
- WATCHDOG_RESET();
- temp = start[offset];
- if (temp != pattern) {
+ /*
+ * Check each location and invert it for the second pass.
+ */
+ for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
+ temp = addr[offset];
+ if (temp != pattern) {
printf("\nFAILURE (read/write) @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
- (ulong)&start[offset], pattern, temp);
+ start_addr + offset, pattern, temp);
errs++;
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
- }
-
- anti_pattern = ~pattern;
- start[offset] = anti_pattern;
+ if (ctrlc())
+ return -1;
}
- /*
- * Check each location for the inverted pattern and zero it.
- */
- for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
- WATCHDOG_RESET();
- anti_pattern = ~pattern;
- temp = start[offset];
- if (temp != anti_pattern) {
+ anti_pattern = ~pattern;
+ addr[offset] = anti_pattern;
+ }
+
+ /*
+ * Check each location for the inverted pattern and zero it.
+ */
+ for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
+ WATCHDOG_RESET();
+ anti_pattern = ~pattern;
+ temp = addr[offset];
+ if (temp != anti_pattern) {
printf("\nFAILURE (read/write): @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
- (ulong)&start[offset], anti_pattern, temp);
+ start_addr + offset, anti_pattern, temp);
errs++;
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
- }
- start[offset] = 0;
+ if (ctrlc())
+ return -1;
}
+ addr[offset] = 0;
}
+
+ return 0;
}
-static int mem_test_quick(vu_long *start, vu_long *end,
- int iteration_limit, vu_long pattern)
+static ulong mem_test_quick(vu_long *buf, ulong start_addr, ulong end_addr,
+ vu_long pattern, int iteration)
{
+ vu_long *end;
vu_long *addr;
- int iterations = 1;
ulong errs = 0;
- ulong incr;
+ ulong incr, length;
ulong val, readback;
+ /* Alternate the pattern */
incr = 1;
- for (;;) {
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
-
- if (iteration_limit && iterations > iteration_limit) {
- printf("Tested %d iteration(s) with %lu errors.\n",
- iterations-1, errs);
- return errs != 0;
- }
- ++iterations;
-
- printf("\rPattern %08lX Writing..."
- "%12s"
- "\b\b\b\b\b\b\b\b\b\b",
- pattern, "");
-
- for (addr = start, val = pattern; addr < end; addr++) {
- WATCHDOG_RESET();
- *addr = val;
- val += incr;
- }
-
- puts("Reading...");
-
- for (addr = start, val = pattern; addr < end; addr++) {
- WATCHDOG_RESET();
- readback = *addr;
- if (readback != val) {
- printf("\nMem error @ 0x%08X: "
- "found %08lX, expected %08lX\n",
- (uint)(uintptr_t)addr, readback, val);
- errs++;
- if (ctrlc()) {
- putc('\n');
- return 1;
- }
- }
- val += incr;
- }
-
+ if (iteration & 1) {
+ incr = -incr;
/*
* Flip the pattern each time to make lots of zeros and
* then, the next time, lots of ones. We decrement
pattern = -pattern; /* complement & increment */
else
pattern = ~pattern;
- incr = -incr;
}
+ length = (end_addr - start_addr) / sizeof(ulong);
+ end = buf + length;
+ printf("\rPattern %08lX Writing..."
+ "%12s"
+ "\b\b\b\b\b\b\b\b\b\b",
+ pattern, "");
+
+ for (addr = buf, val = pattern; addr < end; addr++) {
+ WATCHDOG_RESET();
+ *addr = val;
+ val += incr;
+ }
+
+ puts("Reading...");
+
+ for (addr = buf, val = pattern; addr < end; addr++) {
+ WATCHDOG_RESET();
+ readback = *addr;
+ if (readback != val) {
+ ulong offset = addr - buf;
+
+ printf("\nMem error @ 0x%08X: "
+ "found %08lX, expected %08lX\n",
+ (uint)(uintptr_t)(start_addr + offset),
+ readback, val);
+ errs++;
+ if (ctrlc())
+ return -1;
+ }
+ val += incr;
+ }
+
+ return 0;
}
/*
static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
- vu_long *start, *end;
+ ulong start, end;
+ vu_long *buf, *dummy;
int iteration_limit;
int ret;
+ ulong errs = 0; /* number of errors, or -1 if interrupted */
ulong pattern;
+ int iteration;
#if defined(CONFIG_SYS_ALT_MEMTEST)
const int alt_test = 1;
#else
#endif
if (argc > 1)
- start = (ulong *)simple_strtoul(argv[1], NULL, 16);
+ start = simple_strtoul(argv[1], NULL, 16);
else
- start = (ulong *)CONFIG_SYS_MEMTEST_START;
+ start = CONFIG_SYS_MEMTEST_START;
if (argc > 2)
- end = (ulong *)simple_strtoul(argv[2], NULL, 16);
+ end = simple_strtoul(argv[2], NULL, 16);
else
- end = (ulong *)(CONFIG_SYS_MEMTEST_END);
+ end = CONFIG_SYS_MEMTEST_END;
if (argc > 3)
pattern = (ulong)simple_strtoul(argv[3], NULL, 16);
else
iteration_limit = 0;
- if (alt_test)
- ret = mem_test_alt(start, end, iteration_limit);
- else
- ret = mem_test_quick(start, end, iteration_limit, pattern);
+ printf("Testing %08x ... %08x:\n", (uint)start, (uint)end);
+ debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__,
+ start, end);
+
+ buf = map_sysmem(start, end - start);
+ dummy = map_sysmem(CONFIG_SYS_MEMTEST_SCRATCH, sizeof(vu_long));
+ for (iteration = 0;
+ !iteration_limit || iteration < iteration_limit;
+ iteration++) {
+ if (ctrlc()) {
+ errs = -1UL;
+ break;
+ }
+
+ printf("Iteration: %6d\r", iteration + 1);
+ debug("\n");
+ if (alt_test) {
+ errs = mem_test_alt(buf, start, end, dummy);
+ } else {
+ errs = mem_test_quick(buf, start, end, pattern,
+ iteration);
+ }
+ if (errs == -1UL)
+ break;
+ }
+
+ /*
+ * Work-around for eldk-4.2 which gives this warning if we try to
+ * case in the unmap_sysmem() call:
+ * warning: initialization discards qualifiers from pointer target type
+ */
+ {
+ void *vbuf = (void *)buf;
+ void *vdummy = (void *)dummy;
+
+ unmap_sysmem(vbuf);
+ unmap_sysmem(vdummy);
+ }
+
+ if (errs == -1UL) {
+ /* Memory test was aborted - write a newline to finish off */
+ putc('\n');
+ ret = 1;
+ } else {
+ printf("Tested %d iteration(s) with %lu errors.\n",
+ iteration, errs);
+ ret = errs != 0;
+ }
return ret; /* not reached */
}
-
+#endif /* CONFIG_CMD_MEMTEST */
/* Modify memory.
*
#ifdef CONFIG_CMD_CRC32
-#ifndef CONFIG_CRC32_VERIFY
-
static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- ulong addr, length;
- ulong crc;
- ulong *ptr;
-
- if (argc < 3)
- return CMD_RET_USAGE;
-
- addr = simple_strtoul (argv[1], NULL, 16);
- addr += base_address;
-
- length = simple_strtoul (argv[2], NULL, 16);
-
- crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
-
- printf ("CRC32 for %08lx ... %08lx ==> %08lx\n",
- addr, addr + length - 1, crc);
-
- if (argc > 3) {
- ptr = (ulong *) simple_strtoul (argv[3], NULL, 16);
- *ptr = crc;
- }
-
- return 0;
-}
-
-#else /* CONFIG_CRC32_VERIFY */
-
-int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong addr, length;
- ulong crc;
- ulong *ptr;
- ulong vcrc;
- int verify;
+ int flags = 0;
int ac;
char * const *av;
- if (argc < 3) {
-usage:
+ if (argc < 3)
return CMD_RET_USAGE;
- }
av = argv + 1;
ac = argc - 1;
+#ifdef CONFIG_HASH_VERIFY
if (strcmp(*av, "-v") == 0) {
- verify = 1;
+ flags |= HASH_FLAG_VERIFY;
av++;
ac--;
- if (ac < 3)
- goto usage;
- } else
- verify = 0;
-
- addr = simple_strtoul(*av++, NULL, 16);
- addr += base_address;
- length = simple_strtoul(*av++, NULL, 16);
-
- crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
-
- if (!verify) {
- printf ("CRC32 for %08lx ... %08lx ==> %08lx\n",
- addr, addr + length - 1, crc);
- if (ac > 2) {
- ptr = (ulong *) simple_strtoul (*av++, NULL, 16);
- *ptr = crc;
- }
- } else {
- vcrc = simple_strtoul(*av++, NULL, 16);
- if (vcrc != crc) {
- printf ("CRC32 for %08lx ... %08lx ==> %08lx != %08lx ** ERROR **\n",
- addr, addr + length - 1, crc, vcrc);
- return 1;
- }
}
+#endif
- return 0;
-
+ return hash_command("crc32", flags, cmdtp, flag, ac, av);
}
-#endif /* CONFIG_CRC32_VERIFY */
#endif
);
#endif /* CONFIG_LOOPW */
+#ifdef CONFIG_CMD_MEMTEST
U_BOOT_CMD(
mtest, 5, 1, do_mem_mtest,
"simple RAM read/write test",
"[start [end [pattern [iterations]]]]"
);
+#endif /* CONFIG_CMD_MEMTEST */
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(