/*
* Calculate the actual size of the fdt
- * plus the size needed for two fdt_add_mem_rsv, one
- * for the fdt itself and one for a possible initrd
+ * plus the size needed for 5 fdt_add_mem_rsv, one
+ * for the fdt itself and 4 for a possible initrd
+ * ((initrd-start + initrd-end) * 2 (name & value))
*/
actualsize = fdt_off_dt_strings(blob) +
- fdt_size_dt_strings(blob) + 2*sizeof(struct fdt_reserve_entry);
+ fdt_size_dt_strings(blob) + 5 * sizeof(struct fdt_reserve_entry);
/* Make it so the fdt ends on a page boundary */
actualsize = ALIGN(actualsize + ((uint)blob & 0xfff), 0x1000);
#endif
#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+/*
+ * Provide a weak default function to return the flash bank size.
+ * There might be multiple non-identical flash chips connected to one
+ * chip-select, so we need to pass an index as well.
+ */
+u32 __flash_get_bank_size(int cs, int idx)
+{
+ extern flash_info_t flash_info[];
+
+ /*
+ * As default, a simple 1:1 mapping is provided. Boards with
+ * a different mapping need to supply a board specific mapping
+ * routine.
+ */
+ return flash_info[cs].size;
+}
+u32 flash_get_bank_size(int cs, int idx)
+ __attribute__((weak, alias("__flash_get_bank_size")));
+
/*
* This function can be used to update the size in the "reg" property
- * of the NOR FLASH device nodes. This is necessary for boards with
+ * of all NOR FLASH device nodes. This is necessary for boards with
* non-fixed NOR FLASH sizes.
*/
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+int fdt_fixup_nor_flash_size(void *blob)
{
char compat[][16] = { "cfi-flash", "jedec-flash" };
int off;
int len;
struct fdt_property *prop;
- u32 *reg;
+ u32 *reg, *reg2;
int i;
for (i = 0; i < 2; i++) {
off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
while (off != -FDT_ERR_NOTFOUND) {
+ int idx;
+
/*
- * Found one compatible node, now check if this one
- * has the correct CS
+ * Found one compatible node, so fixup the size
+ * int its reg properties
*/
prop = fdt_get_property_w(blob, off, "reg", &len);
if (prop) {
- reg = (u32 *)&prop->data[0];
- if (reg[0] == cs) {
- reg[2] = size;
- fdt_setprop(blob, off, "reg", reg,
- 3 * sizeof(u32));
-
- return 0;
+ int tuple_size = 3 * sizeof(reg);
+
+ /*
+ * There might be multiple reg-tuples,
+ * so loop through them all
+ */
+ reg = reg2 = (u32 *)&prop->data[0];
+ for (idx = 0; idx < (len / tuple_size); idx++) {
+ /*
+ * Update size in reg property
+ */
+ reg[2] = flash_get_bank_size(reg[0],
+ idx);
+
+ /*
+ * Point to next reg tuple
+ */
+ reg += 3;
}
+
+ fdt_setprop(blob, off, "reg", reg2, len);
}
/* Move to next compatible node */
}
}
- return -1;
+ return 0;
}
#endif
return r;
}
-static int of_n_cells(const void *blob, int nodeoffset, const char *name)
-{
- int np;
- const int *ip;
-
- do {
- np = fdt_parent_offset(blob, nodeoffset);
-
- if (np >= 0)
- nodeoffset = np;
- ip = (int *)fdt_getprop(blob, nodeoffset, name, NULL);
- if (ip)
- return be32_to_cpup(ip);
- } while (np >= 0);
-
- /* No #<NAME>-cells property for the root node */
- return 1;
-}
-
-int of_n_addr_cells(const void *blob, int nodeoffset)
-{
- return of_n_cells(blob, nodeoffset, "#address-cells");
-}
-
-int of_n_size_cells(const void *blob, int nodeoffset)
-{
- return of_n_cells(blob, nodeoffset, "#size-cells");
-}
-
#define PRu64 "%llx"
/* Max address size we deal with */
struct of_bus {
const char *name;
const char *addresses;
- void (*count_cells)(void *blob, int offset,
+ void (*count_cells)(void *blob, int parentoffset,
int *addrc, int *sizec);
u64 (*map)(u32 *addr, const u32 *range,
int na, int ns, int pna);
};
/* Default translator (generic bus) */
-static void of_bus_default_count_cells(void *blob, int offset,
+static void of_bus_default_count_cells(void *blob, int parentoffset,
int *addrc, int *sizec)
{
- if (addrc)
- *addrc = of_n_addr_cells(blob, offset);
- if (sizec)
- *sizec = of_n_size_cells(blob, offset);
+ const u32 *prop;
+
+ if (addrc) {
+ prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL);
+ if (prop)
+ *addrc = be32_to_cpup(prop);
+ else
+ *addrc = 2;
+ }
+
+ if (sizec) {
+ prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL);
+ if (prop)
+ *sizec = be32_to_cpup(prop);
+ else
+ *sizec = 1;
+ }
}
static u64 of_bus_default_map(u32 *addr, const u32 *range,
bus = &of_busses[0];
/* Cound address cells & copy address locally */
- bus->count_cells(blob, node_offset, &na, &ns);
+ bus->count_cells(blob, parent, &na, &ns);
if (!OF_CHECK_COUNTS(na, ns)) {
printf("%s: Bad cell count for %s\n", __FUNCTION__,
fdt_get_name(blob, node_offset, NULL));
/* Get new parent bus and counts */
pbus = &of_busses[0];
- pbus->count_cells(blob, node_offset, &pna, &pns);
+ pbus->count_cells(blob, parent, &pna, &pns);
if (!OF_CHECK_COUNTS(pna, pns)) {
printf("%s: Bad cell count for %s\n", __FUNCTION__,
fdt_get_name(blob, node_offset, NULL));
return phandle + 1;
}
+
+#if defined(CONFIG_VIDEO)
+int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf)
+{
+ int noff;
+ int ret;
+
+ noff = fdt_node_offset_by_compatible(blob, -1, compat);
+ if (noff != -FDT_ERR_NOTFOUND) {
+ debug("%s: %s\n", fdt_get_name(blob, noff, 0), compat);
+add_edid:
+ ret = fdt_setprop(blob, noff, "edid", edid_buf, 128);
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_edid;
+ else
+ goto err_size;
+ } else if (ret < 0) {
+ printf("Can't add property: %s\n", fdt_strerror(ret));
+ return ret;
+ }
+ }
+ return 0;
+err_size:
+ printf("Can't increase blob size: %s\n", fdt_strerror(ret));
+ return ret;
+}
+#endif