cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA

[u-boot] / configs / A13-OLinuXino_defconfig

diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 0daaaae5b41340bda931744de1dd623d1f853074..4532d796a75fb40bb2fc0007a5e153bfae6e4bd7 100644 (file)
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -1,17 +1,29 @@
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
-CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_EMR1=0
+CONFIG_MMC0_CD_PIN="PG0"
+CONFIG_USB0_VBUS_DET="PG1"
 CONFIG_USB1_VBUS_PIN="PG11"
-CONFIG_VIDEO_HDMI=n
+CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_VGA_VIA_LCD=y
-# For use with the Olimex 7" LCD module, adjust timings for other displays
-# Set video-mode=sunxi:800x600-24@60,monitor=lcd in the env. to enable
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_SUNXI=y
-+S:CONFIG_MACH_SUN5I=y
-+S:CONFIG_DRAM_CLK=408
-+S:CONFIG_DRAM_ZQ=123
-+S:CONFIG_DRAM_EMR1=0
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_DFU_RAM=y
+CONFIG_AXP_ALDO3_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y