sunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default

[u-boot] / configs / Mele_M9_defconfig

diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index e5ab0ec3029c62b478f06c76556feb969988c674..16881faf50d4d8b7ab1d04c8e5da9ec691d523c6 100644 (file)
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -1,21 +1,24 @@
+# The Mele M9 is yet another Allwinnner based Android top set box from Mele.
+#
+# It uses the same PCB as the A1000G quad, but in a new case without a
+# USM sata storage slot, and the space on the PCB for the usb to sata
+# bridge connected to the otg controller is not populated, possible
+# making the micro usb otg connector functional (untested)
+#
+# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
+# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
+# micro USB B receptacle, RTL R8188EU (USB) and a full size sdcard slot
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_ZQ=120
+CONFIG_USB1_VBUS_PIN="PC27"
+CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
-CONFIG_FDTFILE="sun6i-a31-m9.dtb"
-+S:CONFIG_ARM=y
-+S:CONFIG_ARCH_SUNXI=y
-+S:CONFIG_MACH_SUN6I=y
-+S:CONFIG_TARGET_MELE_M9=y
-+S:CONFIG_DRAM_CLK=312
-+S:CONFIG_DRAM_ZQ=120
-# The Mele M9 uses 3.3V for general IO
-+S:CONFIG_AXP221_DCDC1_VOLT=3300
-# Ethernet phy power
-+S:CONFIG_AXP221_DLDO1_VOLT=3300
-# USB hub power
-+S:CONFIG_AXP221_DLDO4_VOLT=3300
-# Wifi power
-+S:CONFIG_AXP221_ALDO1_VOLT=3300
-# Vbus gpio for usb1
-+S:CONFIG_USB1_VBUS_PIN="PC27"
-# No Vbus gpio for usb2
-+S:CONFIG_USB2_VBUS_PIN=""
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP221_DCDC1_VOLT=3300
+CONFIG_AXP221_DLDO1_VOLT=3300
+CONFIG_AXP221_DLDO4_VOLT=3300
+CONFIG_AXP221_ALDO1_VOLT=3300