spi: zynqmp_gqspi: Add support for ZynqMP qspi driver

[u-boot] / configs / P1020RDB-PD_NAND_defconfig

diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig
index 5737076f389e930b2f3babc4fbc156dc5d544df8..80f4cb62c35eb887cce38d7d4fa5c807019f717a 100644 (file)
--- a/configs/P1020RDB-PD_NAND_defconfig
+++ b/configs/P1020RDB-PD_NAND_defconfig
@@ -3,7 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x11001000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P1020RDB_PD=y
@@ -13,8 +13,9 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL=y
+CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
@@ -31,6 +32,7 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_DATE=y
+CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -38,15 +40,18 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=ec000000.nor"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=ec000000.nor:128k(dtb),6016k(kernel),57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_NAND=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHYLIB=y
+CONFIG_PHY_MARVELL=y
 CONFIG_NETDEVICES=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_TSEC_ENET=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y