ddr: altera: Add ECC DRAM scrubbing support for Arria10

[u-boot] / configs / P1022DS_NAND_defconfig

diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig
index e2936ecc2b12fdf3f8180a24e27ed58f031921e0..667089efadc299ddc6807796a897e0b457f3061e 100644 (file)
--- a/configs/P1022DS_NAND_defconfig
+++ b/configs/P1022DS_NAND_defconfig
@@ -3,7 +3,7 @@ CONFIG_SYS_TEXT_BASE=0x11001000
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1022DS=y
 CONFIG_FIT=y
@@ -12,8 +12,9 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL=y
+CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C_SUPPORT=y
@@ -31,6 +32,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
+CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -38,15 +40,18 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_FSL_ESDHC=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_NAND=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHYLIB=y
+CONFIG_PHY_MARVELL=y
 CONFIG_NETDEVICES=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_TSEC_ENET=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y