board: sama5d4ek: update to support DM/DT

[u-boot] / configs / fennec-rk3288_defconfig

diff --git a/configs/fennec-rk3288_defconfig b/configs/fennec-rk3288_defconfig
index 5b4d0f14d12b6e05f3dfb8325befd746cb3c5d7c..d1b0ffc467a688754d16ef74a7ca6e608901d396 100644 (file)
--- a/configs/fennec-rk3288_defconfig
+++ b/configs/fennec-rk3288_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ROCKCHIP_RK3288=y
+CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y
 CONFIG_TARGET_FENNEC_RK3288=y
 CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="rk3288-fennec"
@@ -10,26 +11,23 @@ CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_REGMAP=y
@@ -41,9 +39,13 @@ CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
-CONFIG_ROCKCHIP_DWMMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
 CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_FULL is not set
 CONFIG_SPL_PINCTRL=y
 # CONFIG_SPL_PINCTRL_FULL is not set
 CONFIG_ROCKCHIP_RK3288_PINCTRL=y
@@ -60,6 +62,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
 CONFIG_USE_TINY_PRINTF=y
 CONFIG_CMD_DHRYSTONE=y
 CONFIG_ERRNO_STR=y