sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards

[u-boot] / configs / ls1043ardb_nand_defconfig

diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index 7694268c622aa13bd2a8742220c5256c57beec67..04d2934524f167d2a73ea4f8a1f953fdfd8f7add 100644 (file)
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -6,8 +6,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
 CONFIG_DISTRO_DEFAULTS=y
@@ -25,6 +23,8 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -33,6 +33,7 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
+CONFIG_MP=y
 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
@@ -51,6 +52,7 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y