arm64: zynqmp: Dont use 4K sector erase by default for spi-flashes

[u-boot] / configs / xilinx_zynqmp_zc1751_xm015_dc1_defconfig

diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
index d3e0d83251696ba49013623d130a0ca255090e54..6914767187b9ce7ded2b21a1e040a460651c848b 100644 (file)
--- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
@@ -12,19 +12,23 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_ENV_IS_IN_FAT=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SYS_PROMPT="ZynqMP> "
-# CONFIG_CMD_IMLS is not set
+CONFIG_FASTBOOT=y
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_UNZIP=y
+CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FPGA_LOADBP=y
+CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -37,6 +41,7 @@ CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_ISO_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
+CONFIG_ENV_IS_IN_FAT=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -46,14 +51,17 @@ CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
+CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_DM_ETH=y
 CONFIG_PHY_GIGE=y
 CONFIG_ZYNQ_GEM=y
@@ -61,6 +69,7 @@ CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_BASE=0xff000000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ZYNQ_SERIAL=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
@@ -71,8 +80,7 @@ CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="Xilinx"
-CONFIG_G_DNL_VENDOR_NUM=0x03FD
-CONFIG_G_DNL_PRODUCT_NUM=0x0300
+CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
+CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y