efi_selftest: allow building relocation code on x86_64

[u-boot] / configs / xilinx_zynqmp_zcu102_rev1_0_defconfig

diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
index 68da9dc75bdab38a41c2063337cf7698fbe45bf1..11708f7bd3886fb8add8893eb8a8473e73551f77 100644 (file)
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
@@ -4,7 +4,6 @@ CONFIG_ARCH_ZYNQMP=y
 CONFIG_SYS_TEXT_BASE=0x8000000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL=y
-CONFIG_IDENT_STRING=" Xilinx ZynqMP ZCU102 rev1.0"
 CONFIG_ZYNQMP_USB=y
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-rev1.0"
 CONFIG_DEBUG_UART=y
@@ -14,16 +13,12 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_MEMTEST=y
@@ -33,6 +28,7 @@ CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
 CONFIG_CMD_FPGA_LOADP=y
+CONFIG_CMD_FPGA_LOAD_SECURE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -52,6 +48,10 @@ CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_CLK_ZYNQMP=y
 CONFIG_DFU_RAM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQMPPL=y
 CONFIG_DM_GPIO=y
@@ -62,6 +62,8 @@ CONFIG_ZYNQ_I2C1=y
 CONFIG_MISC=y
 CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
@@ -93,6 +95,7 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_XHCI_ZYNQMP=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_STORAGE=y