sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards

[u-boot] / configs / zynq_zc702_defconfig

diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
index 5fadf5074e02ef4ab652fd565c54fe9a5d4b7eac..ab719f97cd48e8caac55e3b74526d5cb9f5c584f 100644 (file)
--- a/configs/zynq_zc702_defconfig
+++ b/configs/zynq_zc702_defconfig
@@ -2,6 +2,9 @@ CONFIG_ARM=y
 CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0xe0001000
+CONFIG_DEBUG_UART_CLOCK=50000000
 CONFIG_IDENT_STRING=" Xilinx Zynq ZC702"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702"
@@ -10,11 +13,11 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_IMAGE_FORMAT_LEGACY=y
 CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_PROMPT="Zynq> "
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_EEPROM=y
@@ -39,7 +42,10 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
+CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
+CONFIG_SYS_I2C_ZYNQ=y
+CONFIG_ZYNQ_I2C0=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
@@ -53,8 +59,6 @@ CONFIG_PHY_REALTEK=y
 CONFIG_PHY_XILINX=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
@@ -68,3 +72,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
 CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_THOR=y