ecosboard: delete bit-rotted eCos code

[openocd] / configure.ac

diff --git a/configure.ac b/configure.ac
index ad7681afc637f2e31627e640ee1177b0c951514e..0a9a658676dd83daf79586f778e494df152e9cee 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -396,10 +396,6 @@ AC_ARG_ENABLE([amtjtagaccel],
   AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
   [build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
 
-AC_ARG_ENABLE([ecosboard],
-  AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
-  [build_ecosboard=$enableval], [build_ecosboard=no])
-
 AC_ARG_ENABLE([zy1000_master],
   AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]),
   [build_zy1000_master=$enableval], [build_zy1000_master=no])
@@ -474,6 +470,14 @@ AC_ARG_ENABLE([buspirate],
   AS_HELP_STRING([--enable-buspirate], [Enable building support for the Buspirate]),
   [build_buspirate=$enableval], [build_buspirate=no])
 
+AC_ARG_ENABLE([stlink],
+  AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]),
+  [build_stlink=$enableval], [build_stlink=no])
+
+AC_ARG_ENABLE([osbdm],
+  AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]),
+  [build_osbdm=$enableval], [build_osbdm=no])
+
 AC_ARG_ENABLE([minidriver_dummy],
   AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
   [build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
@@ -624,12 +628,6 @@ else
   AC_DEFINE([BUILD_EP93XX], [0], [0 if you don't want ep93xx.])
 fi
 
-if test $build_ecosboard = yes; then
-  AC_DEFINE([BUILD_ECOSBOARD], [1], [1 if you want eCosBoard.])
-else
-  AC_DEFINE([BUILD_ECOSBOARD], [0], [0 if you don't want eCosBoard.])
-fi
-
 if test $build_zy1000 = yes; then
   AC_DEFINE([BUILD_ZY1000], [1], [1 if you want ZY1000.])
 else
@@ -773,6 +771,18 @@ else
   AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
 fi
 
+if test $build_stlink = yes; then
+  AC_DEFINE(BUILD_STLINK, 1, [1 if you want the ST-Link JTAG driver.])
+else
+  AC_DEFINE(BUILD_STLINK, 0, [0 if you don't want the ST-Link JTAG driver.])
+fi
+
+if test $build_osbdm = yes; then
+  AC_DEFINE(BUILD_OSBDM, 1, [1 if you want the OSBDM driver.])
+else
+  AC_DEFINE(BUILD_OSBDM, 0, [0 if you don't want the OSBDM driver.])
+fi
+
 if test "$use_internal_jimtcl" = yes; then
   if test -f "$srcdir/jimtcl/configure.ac"; then
     AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim])
@@ -1059,7 +1069,7 @@ fi
 
 # Check for libusb1 ported drivers.
 build_usb_ng=no
-if test $build_jlink = yes; then
+if test $build_jlink = yes -o $build_stlink = yes -o $build_osbdm = yes; then
   build_usb_ng=yes
 fi
 
@@ -1084,7 +1094,6 @@ AM_CONDITIONAL([PARPORT], [test $build_parport = yes])
 AM_CONDITIONAL([DUMMY], [test $build_dummy = yes])
 AM_CONDITIONAL([GIVEIO], [test x$parport_use_giveio = xyes])
 AM_CONDITIONAL([EP93XX], [test $build_ep93xx = yes])
-AM_CONDITIONAL([ECOSBOARD], [test $build_ecosboard = yes])
 AM_CONDITIONAL([ZY1000], [test $build_zy1000 = yes])
 AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
 AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
@@ -1107,6 +1116,8 @@ AM_CONDITIONAL([ULINK], [test $build_ulink = yes])
 AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes])
 AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes])
 AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
+AM_CONDITIONAL([STLINK], [test $build_stlink = yes])
+AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
 AM_CONDITIONAL([USB], [test $build_usb = yes])
 AM_CONDITIONAL([USB_NG], [test $build_usb_ng = yes])
 AM_CONDITIONAL([USE_LIBUSB0], [test $use_libusb0 = yes])
@@ -1219,6 +1230,7 @@ AC_CONFIG_FILES([
   src/helper/Makefile
   src/jtag/Makefile
   src/jtag/drivers/Makefile
+  src/jtag/stlink/Makefile
   src/transport/Makefile
   src/xsvf/Makefile
   src/svf/Makefile