AC_PREREQ(2.60)
-AC_INIT([openocd], [0.7.0-dev],
+AC_INIT([openocd], [0.8.0-dev],
[OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
AC_CONFIG_SRCDIR([src/openocd.c])
AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip])
AM_MAINTAINER_MODE
-AM_CONFIG_HEADER([config.h])
+AC_CONFIG_HEADERS([config.h])
AH_BOTTOM([
#include <helper/system.h>
#include <helper/types.h>
AC_ARG_ENABLE([at91rm9200],
AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
[build_at91rm9200=$enableval], [build_at91rm9200=no])
+
+ AC_ARG_ENABLE([bcm2835gpio],
+ AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+ [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
;;
*)
build_ep93xx=no
build_at91rm9200=no
+ build_bcm2835gpio=no
;;
esac
AS_HELP_STRING([--enable-usbprog], [Enable building support for the usbprog JTAG Programmer]),
[build_usbprog=$enableval], [build_usbprog=no])
+AC_ARG_ENABLE([openjtag_ftd2xx],
+ AS_HELP_STRING([--enable-openjtag_ftd2xx], [Enable building support for the OpenJTAG Programmer with ftd2xx driver]),
+ [build_openjtag_ftd2xx=$enableval], [build_openjtag_ftd2xx=no])
+
+AC_ARG_ENABLE([openjtag_ftdi],
+ AS_HELP_STRING([--enable-openjtag_ftdi], [Enable building support for the OpenJTAG Programmer with ftdi driver]),
+ [build_openjtag_ftdi=$enableval], [build_openjtag_ftdi=no])
+
AC_ARG_ENABLE([oocd_trace],
AS_HELP_STRING([--enable-oocd_trace],
[Enable building support for some prototype OpenOCD+trace ETM capture hardware]),
AC_ARG_ENABLE([stlink],
AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]),
- [build_hladapter=$enableval], [build_hladapter=no])
+ [build_hladapter_stlink=$enableval], [build_hladapter_stlink=no])
+
+AC_ARG_ENABLE([ti-icdi],
+ AS_HELP_STRING([--enable-ti-icdi], [Enable building support for the TI ICDI JTAG Programmer]),
+ [build_hladapter_icdi=$enableval], [build_hladapter_icdi=no])
AC_ARG_ENABLE([osbdm],
AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]),
AS_HELP_STRING([--enable-libusb0], [Use libusb-0.1 library for USB JTAG devices]),
[check_libusb0=$enableval], [check_libusb0=no])
+AC_ARG_ENABLE([aice],
+ AS_HELP_STRING([--enable-aice], [Enable building support for the Andes JTAG Programmer]),
+ [build_aice=$enableval], [build_aice=no])
+
build_minidriver=no
AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
if test $build_zy1000 = yes; then
AC_DEFINE([BUILD_AT91RM9200], [0], [0 if you don't want at91rm9200.])
fi
+if test $build_bcm2835gpio = yes; then
+ build_bitbang=yes
+ AC_DEFINE([BUILD_BCM2835GPIO], [1], [1 if you want bcm2835gpio.])
+else
+ AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
+fi
+
if test x$parport_use_ppdev = xyes; then
AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
else
fi
if test $build_usb_blaster_libftdi = yes; then
- build_bitbang=yes
AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [1], [1 if you want libftdi usb_blaster.])
else
AC_DEFINE([BUILD_USB_BLASTER_LIBFTDI], [0], [0 if you don't want libftdi usb_blaster.])
fi
if test $build_usb_blaster_ftd2xx = yes; then
- build_bitbang=yes
AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [1], [1 if you want ftd2xx usb_blaster.])
else
AC_DEFINE([BUILD_USB_BLASTER_FTD2XX], [0], [0 if you don't want ftd2xx usb_blaster.])
AC_DEFINE([BUILD_USBPROG], [0], [0 if you don't want the usbprog JTAG driver.])
fi
+AC_DEFINE([BUILD_OPENJTAG], [0], [0 if you don't want the OpenJTAG driver.])
+AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [0], [0 if you don't want the OpenJTAG driver with FTD2XX driver.])
+AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [0], [0 if you don't want to build OpenJTAG driver with libftdi.])
+
+if test $build_openjtag_ftd2xx = yes; then
+ AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG driver.])
+ AC_DEFINE([BUILD_OPENJTAG_FTD2XX], [1], [1 if you want the OpenJTAG driver with FTD2XX driver.])
+fi
+if test $build_openjtag_ftdi = yes; then
+ AC_DEFINE([BUILD_OPENJTAG], [1], [1 if you want the OpenJTAG drvier.])
+ AC_DEFINE([BUILD_OPENJTAG_LIBFTDI], [1], [1 if you want to build OpenJTAG with FTDI driver.])
+fi
+
if test $build_oocd_trace = yes; then
AC_DEFINE([BUILD_OOCD_TRACE], [1], [1 if you want the OpenOCD+trace ETM capture driver.])
else
AC_DEFINE([BUILD_JLINK], [0], [0 if you don't want the J-Link JTAG driver.])
fi
+if test $build_aice = yes; then
+ AC_DEFINE([BUILD_AICE], [1], [1 if you want the AICE JTAG driver.])
+else
+ AC_DEFINE([BUILD_AICE], [0], [0 if you don't want the AICE JTAG driver.])
+fi
+
if test $build_vsllink = yes; then
AC_DEFINE([BUILD_VSLLINK], [1], [1 if you want the Versaloon-Link JTAG driver.])
else
AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
fi
-if test $build_hladapter = yes; then
- AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the ST-Link JTAG driver.])
+if test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes; then
+ AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
else
- AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you don't want the ST-Link JTAG driver.])
+ AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you don't want the High Level JTAG driver.])
fi
if test $build_osbdm = yes; then
AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
AC_MSG_CHECKING([for ftd2xx.lib exists (win32)])
# if we are given a zipdir...
AC_MSG_ERROR([The option: --with-ftd2xx-win32-zipdir is for win32 only])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes -o $build_openjtag_ftd2xx = yes; then
# Must be linux
if test $host_os != linux-gnu && test $host_os != linux ; then
AC_MSG_ERROR([The (linux) ftd2xx library from FTDICHIP.com is linux only. Try --enable-ft2232-libftdi instead])
fi
fi
LDFLAGS="${LDFLAGS} ${FTD2XX_LDFLAGS}"
- LIBS="${LIBS} ${FTD2XX_LIB}"
+ LIBS="${FTD2XX_LIB} ${LIBS}"
AC_MSG_RESULT([${FTD2XX_LDFLAGS} ${FTD2XX_LIB}])
else
AC_CHECK_HEADER([ftd2xx.h],[],[
CFLAGS=$CFLAGS_SAVE
fi
-if test $build_ft2232_libftdi = yes ; then
+if test $build_ft2232_libftdi = yes -o $build_usb_blaster_libftdi = yes -o \
+ $build_openjtag_ftdi = yes; then
# We assume: the package is preinstalled in the proper place
# these present as 2 libraries..
LIBS="$LIBS -lftdi -lusb"
# check for usb.h when a driver will require it
build_usb=no
if test $build_vsllink = yes -o $build_usbprog = yes -o \
- $build_rlink = yes -o $build_ulink = yes -o $build_armjtagew = yes
+ $build_rlink = yes -o $build_ulink = yes -o $build_armjtagew = yes -o \
+ $build_aice = yes
then
build_usb=yes
fi
# Check for libusb1 ported drivers.
build_usb_ng=no
-if test $build_jlink = yes -o $build_hladapter = yes -o $build_osbdm = yes -o \
- $build_opendous = yes -o $build_ftdi = yes
+if test $build_jlink = yes -o $build_hladapter_stlink = yes -o $build_osbdm = yes -o \
+ $build_opendous = yes -o $build_ftdi = yes -o $build_hladapter_icdi = yes
then
build_usb_ng=yes
fi
AM_CONDITIONAL([ZY1000_MASTER], [test $build_zy1000_master = yes])
AM_CONDITIONAL([IOUTIL], [test $build_ioutil = yes])
AM_CONDITIONAL([AT91RM9200], [test $build_at91rm9200 = yes])
+AM_CONDITIONAL([BCM2835GPIO], [test $build_bcm2835gpio = yes])
AM_CONDITIONAL([BITBANG], [test $build_bitbang = yes])
AM_CONDITIONAL([FT2232_LIBFTDI], [test $build_ft2232_libftdi = yes])
AM_CONDITIONAL([FT2232_DRIVER], [test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes])
AM_CONDITIONAL([FTDI_DRIVER], [test $build_ftdi = yes])
AM_CONDITIONAL([USB_BLASTER_LIBFTDI], [test $build_usb_blaster_libftdi = yes])
+AM_CONDITIONAL([USB_BLASTER_FTD2XX], [test $build_usb_blaster_ftd2xx = yes])
AM_CONDITIONAL([USB_BLASTER_DRIVER], [test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes])
AM_CONDITIONAL([AMTJTAGACCEL], [test $build_amtjtagaccel = yes])
AM_CONDITIONAL([GW16012], [test $build_gw16012 = yes])
AM_CONDITIONAL([PRESTO_LIBFTDI], [test $build_presto_libftdi = yes])
AM_CONDITIONAL([PRESTO_DRIVER], [test $build_presto_ftd2xx = yes -o $build_presto_libftdi = yes])
AM_CONDITIONAL([USBPROG], [test $build_usbprog = yes])
+AM_CONDITIONAL([OPENJTAG], [test $build_openjtag_ftd2xx = yes -o $build_openjtag_ftdi = yes])
AM_CONDITIONAL([OOCD_TRACE], [test $build_oocd_trace = yes])
AM_CONDITIONAL([JLINK], [test $build_jlink = yes])
+AM_CONDITIONAL([AICE], [test $build_aice = yes])
AM_CONDITIONAL([VSLLINK], [test $build_vsllink = yes])
AM_CONDITIONAL([RLINK], [test $build_rlink = yes])
AM_CONDITIONAL([ULINK], [test $build_ulink = yes])
AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes])
AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes])
AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
-AM_CONDITIONAL([HLADAPTER], [test $build_hladapter = yes])
+AM_CONDITIONAL([HLADAPTER], [test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes])
AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes])
AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes])
src/helper/Makefile
src/jtag/Makefile
src/jtag/drivers/Makefile
+ src/jtag/drivers/usb_blaster/Makefile
src/jtag/hla/Makefile
+ src/jtag/aice/Makefile
src/transport/Makefile
src/xsvf/Makefile
src/svf/Makefile