AC_PREREQ(2.60)
-AC_INIT([openocd], [0.4.0-dev],
+AC_INIT([openocd], [0.5.0-dev],
[OpenOCD Mailing List <openocd-development@lists.berlios.de>])
AC_CONFIG_SRCDIR([src/openocd.c])
+m4_include(config_subdir.m4)dnl
+
AM_INIT_AUTOMAKE([-Wall -Wno-portability dist-bzip2 dist-zip])
AM_MAINTAINER_MODE
AM_CONFIG_HEADER(config.h)
AH_BOTTOM([
-#include "system.h"
-#include "replacements.h"
+#include <helper/system.h>
+#include <helper/replacements.h>
])
AC_LANG_C
AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]),
[build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no])
+AC_ARG_ENABLE(usb_blaster_libftdi,
+ AS_HELP_STRING([--enable-usb_blaster_libftdi], [Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX]),
+ [build_usb_blaster_libftdi=$enableval], [build_usb_blaster_libftdi=no])
+
+AC_ARG_ENABLE(usb_blaster_ftd2xx,
+ AS_HELP_STRING([--enable-usb_blaster_ftd2xx], [Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com]),
+ [build_usb_blaster_ftd2xx=$enableval], [build_usb_blaster_ftd2xx=no])
+
AC_ARG_ENABLE(amtjtagaccel,
AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
[build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
[build_ecosboard=$enableval], [build_ecosboard=no])
+AC_ARG_ENABLE(zy1000_master,
+ AS_HELP_STRING([--enable-zy1000-master], [Use ZY1000 JTAG master registers]),
+ [build_zy1000_master=$enableval], [build_zy1000_master=no])
+
AC_ARG_ENABLE(zy1000,
AS_HELP_STRING([--enable-zy1000], [Enable ZY1000 interface]),
[build_zy1000=$enableval], [build_zy1000=no])
AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
[build_ioutil=$enableval], [build_ioutil=no])
-AC_ARG_ENABLE(httpd,
- AS_HELP_STRING([--enable-httpd], [Enable builtin httpd server - useful for standalone OpenOCD implementations]),
- [build_httpd=$enableval], [build_httpd=no])
-
case "${host_cpu}" in
arm*)
AC_ARG_ENABLE(ep93xx,
AS_HELP_STRING([--enable-arm-jtag-ew], [Enable building support for the Olimex ARM-JTAG-EW Programmer]),
[build_armjtagew=$enableval], [build_armjtagew=no])
+AC_ARG_ENABLE(buspirate,
+ AS_HELP_STRING([--enable-buspirate], [Enable building support for the Buspirate]),
+ [build_buspirate=$enableval], [build_buspirate=no])
+
AC_ARG_ENABLE(minidriver_dummy,
AS_HELP_STRING([--enable-minidriver-dummy], [Enable the dummy minidriver.]),
[build_minidriver_dummy=$enableval], [build_minidriver_dummy=no])
+AC_ARG_ENABLE(internal-jimtcl,
+ AS_HELP_STRING([--disable-internal-jimtcl], [Disable building internal jimtcl]),
+ [use_internal_jimtcl=$enableval], [use_internal_jimtcl=yes])
build_minidriver=no
AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
AC_MSG_WARN([--disable-parport-giveio is not supported by MinGW32 hosts])
fi
parport_use_giveio=yes
-
+
CFLAGS="$CFLAGS -D__USE_MINGW_ANSI_STDIO"
AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.])
AC_DEFINE(BUILD_ZY1000, 0, [0 if you don't want ZY1000.])
fi
+if test $build_zy1000_master = yes; then
+ AC_DEFINE(BUILD_ZY1000_MASTER, 1, [1 if you want ZY1000 JTAG master registers.])
+else
+ AC_DEFINE(BUILD_ZY1000_MASTER, 0, [0 if you don't want ZY1000 JTAG master registers.])
+fi
+
if test $build_at91rm9200 = yes; then
build_bitbang=yes
AC_DEFINE(BUILD_AT91RM9200, 1, [1 if you want at91rm9200.])
AC_DEFINE(BUILD_FT2232_FTD2XX, 0, [0 if you don't want ftd2xx ft2232.])
fi
+if test $build_usb_blaster_libftdi = yes; then
+ build_bitbang=yes
+ AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 1, [1 if you want libftdi usb_blaster.])
+else
+ AC_DEFINE(BUILD_USB_BLASTER_LIBFTDI, 0, [0 if you don't want libftdi usb_blaster.])
+fi
+
+if test $build_usb_blaster_ftd2xx = yes; then
+ build_bitbang=yes
+ AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 1, [1 if you want ftd2xx usb_blaster.])
+else
+ AC_DEFINE(BUILD_USB_BLASTER_FTD2XX, 0, [0 if you don't want ftd2xx usb_blaster.])
+fi
+
if test $build_amtjtagaccel = yes; then
AC_DEFINE(BUILD_AMTJTAGACCEL, 1, [1 if you want the Amontec JTAG-Accelerator driver.])
else
AC_DEFINE(BUILD_ARMJTAGEW, 0, [0 if you don't want the ARM-JTAG-EW JTAG driver.])
fi
+if test $build_buspirate = yes; then
+ AC_DEFINE(BUILD_BUSPIRATE, 1, [1 if you want the Buspirate JTAG driver.])
+else
+ AC_DEFINE(BUILD_BUSPIRATE, 0, [0 if you don't want the Buspirate JTAG driver.])
+fi
+
+if test "$use_internal_jimtcl" = yes; then
+ if test -f "$srcdir/jimtcl/configure.ac"; then
+ AX_CONFIG_SUBDIR_OPTION([jimtcl], [--with-jim-ext=nvp --disable-lineedit])
+ else
+ AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
+ fi
+fi
+
#-- Deal with MingW/Cygwin FTD2XX issues
if test $is_win32 = yes; then
AC_MSG_ERROR([The option: with_ftd2xx_linux_tardir is for LINUX only.])
fi
-if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes ; then
+if test $build_ft2232_ftd2xx = yes -o $build_presto_ftd2xx = yes -o $build_usb_blaster_ftd2xx = yes ; then
AC_MSG_CHECKING([for ftd2xx.lib exists (win32)])
# if we are given a zipdir...
AM_CONDITIONAL(EP93XX, test $build_ep93xx = yes)
AM_CONDITIONAL(ECOSBOARD, test $build_ecosboard = yes)
AM_CONDITIONAL(ZY1000, test $build_zy1000 = yes)
+AM_CONDITIONAL(ZY1000_MASTER, test $build_zy1000_master = yes)
AM_CONDITIONAL(IOUTIL, test $build_ioutil = yes)
-AM_CONDITIONAL(HTTPD, test $build_httpd = yes)
AM_CONDITIONAL(AT91RM9200, test $build_at91rm9200 = yes)
AM_CONDITIONAL(BITBANG, test $build_bitbang = yes)
AM_CONDITIONAL(FT2232_LIBFTDI, test $build_ft2232_libftdi = yes)
AM_CONDITIONAL(FT2232_DRIVER, test $build_ft2232_ftd2xx = yes -o $build_ft2232_libftdi = yes)
+AM_CONDITIONAL(USB_BLASTER_LIBFTDI, test $build_usb_blaster_libftdi = yes)
+AM_CONDITIONAL(USB_BLASTER_DRIVER, test $build_usb_blaster_ftd2xx = yes -o $build_usb_blaster_libftdi = yes)
AM_CONDITIONAL(AMTJTAGACCEL, test $build_amtjtagaccel = yes)
AM_CONDITIONAL(GW16012, test $build_gw16012 = yes)
AM_CONDITIONAL(PRESTO_LIBFTDI, test $build_presto_libftdi = yes)
AM_CONDITIONAL(VSLLINK, test $build_vsllink = yes)
AM_CONDITIONAL(RLINK, test $build_rlink = yes)
AM_CONDITIONAL(ARMJTAGEW, test $build_armjtagew = yes)
+AM_CONDITIONAL(BUSPIRATE, test $build_buspirate = yes)
AM_CONDITIONAL(USB, test $build_usb = yes)
AM_CONDITIONAL(IS_CYGWIN, test $is_cygwin = yes)
AM_CONDITIONAL(IS_MINGW, test $is_mingw = yes)
AM_CONDITIONAL(MINIDRIVER, test $build_minidriver = yes)
AM_CONDITIONAL(MINIDRIVER_DUMMY, test $build_minidriver_dummy = yes)
+AM_CONDITIONAL(INTERNAL_JIMTCL, test $use_internal_jimtcl = yes)
+
# Look for environ alternatives. Possibility #1: is environ in unistd.h or stdlib.h?
AC_MSG_CHECKING([for environ in unistd.h and stdlib.h])
AC_COMPILE_IFELSE([
AC_DEFINE([_GNU_SOURCE],[1],[Use GNU C library extensions (e.g. stdndup).])
# set default gcc warnings
-GCC_WARNINGS="-Wall -Wstrict-prototypes -Wformat-security"
+GCC_WARNINGS="-Wall -Wstrict-prototypes -Wformat-security -Wshadow"
if test "${gcc_wextra}" = yes; then
GCC_WARNINGS="${GCC_WARNINGS} -Wextra -Wno-unused-parameter"
GCC_WARNINGS="${GCC_WARNINGS} -Wbad-function-cast"
src/Makefile dnl
src/helper/Makefile dnl
src/jtag/Makefile dnl
+ src/jtag/drivers/Makefile dnl
src/xsvf/Makefile dnl
src/svf/Makefile dnl
src/target/Makefile dnl
projects / openocd / blobdiff