#include <command.h>
#include <arm926ejs.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1 (void)
{
{
volatile int i;
- /* Many OMAP regs need at least 2 nops */
+ /* copro seems to need some delay between reading and writing */
for (i = 0; i < 100; i++);
}
-/* See also ARM Ref. Man. */
+/* See also ARM926EJ-S Technical Reference Manual */
#define C1_MMU (1<<0) /* mmu off/on */
#define C1_ALIGN (1<<1) /* alignment faults off/on */
#define C1_DC (1<<2) /* dcache off/on */
-#define C1_WB (1<<3) /* merging write buffer on/off */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
#define C1_SYS_PROT (1<<8) /* system protection */
#define C1_ROM_PROT (1<<9) /* ROM protection */
#define C1_IC (1<<12) /* icache off/on */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
-#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+
int cpu_init (void)
{
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
- IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
return 0;
/* flush I/D-cache */
i = 0;
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+
return (0);
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- extern void reset_cpu (ulong addr);
-
disable_interrupts ();
reset_cpu (0);
/*NOTREACHED*/
return (0);
}
-void icache_enable (void)
+/* cache_bit must be either C1_IC or C1_DC */
+static void cache_enable(uint32_t cache_bit)
{
- ulong reg;
+ uint32_t reg;
- reg = read_p15_c1 (); /* get control reg. */
- cp_delay ();
- write_p15_c1 (reg | C1_IC);
+ reg = read_p15_c1(); /* get control reg. */
+ cp_delay();
+ write_p15_c1(reg | cache_bit);
}
-void icache_disable (void)
+/* cache_bit must be either C1_IC or C1_DC */
+static void cache_disable(uint32_t cache_bit)
{
- ulong reg;
+ uint32_t reg;
+
+ reg = read_p15_c1();
+ cp_delay();
+ write_p15_c1(reg & ~cache_bit);
+}
- reg = read_p15_c1 ();
- cp_delay ();
- write_p15_c1 (reg & ~C1_IC);
+void icache_enable(void)
+{
+ cache_enable(C1_IC);
+}
+
+void icache_disable(void)
+{
+ cache_disable(C1_IC);
+}
+
+int icache_status(void)
+{
+ return (read_p15_c1() & C1_IC) != 0;
+}
+
+void dcache_enable(void)
+{
+ cache_enable(C1_DC);
+}
+
+void dcache_disable(void)
+{
+ cache_disable(C1_DC);
}
-int icache_status (void)
+int dcache_status(void)
{
- return (read_p15_c1 () & C1_IC) != 0;
+ return (read_p15_c1() & C1_DC) != 0;
}