+++ /dev/null
-/*
- * Board specific setup info
- *
- * (C) Copyright 2008
- * Texas Instruments, <www.ti.com>
- *
- * Initial Code by:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks_omap3.h>
-
-_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
-
-#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
-/**************************************************************************
- * cpy_clk_code: relocates clock code into SRAM where its safer to execute
- * R1 = SRAM destination address.
- *************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
- /* Copy DPLL code into SRAM */
- adr r0, go_to_speed /* get addr of clock setting code */
- mov r2, #384 /* r2 size to copy (div by 32 bytes) */
- mov r1, r1 /* r1 <- dest address (passed in) */
- add r2, r2, r0 /* r2 <- source end address */
-next2:
- ldmia r0!, {r3 - r10} /* copy from source address [r0] */
- stmia r1!, {r3 - r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next2
- mov pc, lr /* back to caller */
-
-/* ***************************************************************************
- * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
- * -executed from SRAM.
- * R0 = CM_CLKEN_PLL-bypass value
- * R1 = CM_CLKSEL1_PLL-m, n, and divider values
- * R2 = CM_CLKSEL_CORE-divider values
- * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
- *
- * Note: If core unlocks/relocks and SDRAM is running fast already it gets
- * confused. A reset of the controller gets it back. Taking away its
- * L3 when its not in self refresh seems bad for it. Normally, this
- * code runs from flash before SDR is init so that should be ok.
- ****************************************************************************/
-.global go_to_speed
- go_to_speed:
- stmfd sp!, {r4 - r6}
-
- /* move into fast relock bypass */
- ldr r4, pll_ctl_add
- str r0, [r4]
-wait1:
- ldr r5, [r3] /* get status */
- and r5, r5, #0x1 /* isolate core status */
- cmp r5, #0x1 /* still locked? */
- beq wait1 /* if lock, loop */
-
- /* set new dpll dividers _after_ in bypass */
- ldr r5, pll_div_add1
- str r1, [r5] /* set m, n, m2 */
- ldr r5, pll_div_add2
- str r2, [r5] /* set l3/l4/.. dividers*/
- ldr r5, pll_div_add3 /* wkup */
- ldr r2, pll_div_val3 /* rsm val */
- str r2, [r5]
- ldr r5, pll_div_add4 /* gfx */
- ldr r2, pll_div_val4
- str r2, [r5]
- ldr r5, pll_div_add5 /* emu */
- ldr r2, pll_div_val5
- str r2, [r5]
-
- /* now prepare GPMC (flash) for new dpll speed */
- /* flash needs to be stable when we jump back to it */
- ldr r5, flash_cfg3_addr
- ldr r2, flash_cfg3_val
- str r2, [r5]
- ldr r5, flash_cfg4_addr
- ldr r2, flash_cfg4_val
- str r2, [r5]
- ldr r5, flash_cfg5_addr
- ldr r2, flash_cfg5_val
- str r2, [r5]
- ldr r5, flash_cfg1_addr
- ldr r2, [r5]
- orr r2, r2, #0x3 /* up gpmc divider */
- str r2, [r5]
-
- /* lock DPLL3 and wait a bit */
- orr r0, r0, #0x7 /* set up for lock mode */
- str r0, [r4] /* lock */
- nop /* ARM slow at this point working at sys_clk */
- nop
- nop
- nop
-wait2:
- ldr r5, [r3] /* get status */
- and r5, r5, #0x1 /* isolate core status */
- cmp r5, #0x1 /* still locked? */
- bne wait2 /* if lock, loop */
- nop
- nop
- nop
- nop
- ldmfd sp!, {r4 - r6}
- mov pc, lr /* back to caller, locked */
-
-_go_to_speed: .word go_to_speed
-
-/* these constants need to be close for PIC code */
-/* The Nor has to be in the Flash Base CS0 for this condition to happen */
-flash_cfg1_addr:
- .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG1)
-flash_cfg3_addr:
- .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG3)
-flash_cfg3_val:
- .word STNOR_GPMC_CONFIG3
-flash_cfg4_addr:
- .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG4)
-flash_cfg4_val:
- .word STNOR_GPMC_CONFIG4
-flash_cfg5_val:
- .word STNOR_GPMC_CONFIG5
-flash_cfg5_addr:
- .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG5)
-pll_ctl_add:
- .word CM_CLKEN_PLL
-pll_div_add1:
- .word CM_CLKSEL1_PLL
-pll_div_add2:
- .word CM_CLKSEL_CORE
-pll_div_add3:
- .word CM_CLKSEL_WKUP
-pll_div_val3:
- .word (WKUP_RSM << 1)
-pll_div_add4:
- .word CM_CLKSEL_GFX
-pll_div_val4:
- .word (GFX_DIV << 0)
-pll_div_add5:
- .word CM_CLKSEL1_EMU
-pll_div_val5:
- .word CLSEL1_EMU_VAL
-
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
- ldr sp, SRAM_STACK
- str ip, [sp] /* stash old link register */
- mov ip, lr /* save link reg across call */
- bl s_init /* go setup pll, mux, memory */
- ldr ip, [sp] /* restore save ip */
- mov lr, ip /* restore link reg */
-
- /* back to arch calling code */
- mov pc, lr
-
- /* the literal pools origin */
- .ltorg
-
-REG_CONTROL_STATUS:
- .word CONTROL_STATUS
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
-
-/* DPLL(1-4) PARAM TABLES */
-
-/*
- * Each of the tables has M, N, FREQSEL, M2 values defined for nominal
- * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c).
- * The values are defined for all possible sysclk and for ES1 and ES2.
- */
-
-mpu_dpll_param:
-/* 12MHz */
-/* ES1 */
-.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1
-/* ES2 */
-.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2
-/* 3410 */
-.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12
-
-/* 13MHz */
-/* ES1 */
-.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1
-/* ES2 */
-.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2
-/* 3410 */
-.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13
-
-/* 19.2MHz */
-/* ES1 */
-.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1
-/* ES2 */
-.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2
-/* 3410 */
-.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2
-
-/* 26MHz */
-/* ES1 */
-.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1
-/* ES2 */
-.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2
-/* 3410 */
-.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26
-
-/* 38.4MHz */
-/* ES1 */
-.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1
-/* ES2 */
-.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2
-/* 3410 */
-.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4
-
-
-.globl get_mpu_dpll_param
-get_mpu_dpll_param:
- adr r0, mpu_dpll_param
- mov pc, lr
-
-iva_dpll_param:
-/* 12MHz */
-/* ES1 */
-.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1
-/* ES2 */
-.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2
-/* 3410 */
-.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12
-
-/* 13MHz */
-/* ES1 */
-.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1
-/* ES2 */
-.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2
-/* 3410 */
-.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13
-
-/* 19.2MHz */
-/* ES1 */
-.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1
-/* ES2 */
-.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2
-/* 3410 */
-.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2
-
-/* 26MHz */
-/* ES1 */
-.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1
-/* ES2 */
-.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2
-/* 3410 */
-.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26
-
-/* 38.4MHz */
-/* ES1 */
-.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1
-/* ES2 */
-.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2
-/* 3410 */
-.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4
-
-
-.globl get_iva_dpll_param
-get_iva_dpll_param:
- adr r0, iva_dpll_param
- mov pc, lr
-
-/* Core DPLL targets for L3 at 166 & L133 */
-core_dpll_param:
-/* 12MHz */
-/* ES1 */
-.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1
-/* ES2 */
-.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
-/* 3410 */
-.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
-
-/* 13MHz */
-/* ES1 */
-.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1
-/* ES2 */
-.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
-/* 3410 */
-.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
-
-/* 19.2MHz */
-/* ES1 */
-.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1
-/* ES2 */
-.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
-/* 3410 */
-.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
-
-/* 26MHz */
-/* ES1 */
-.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1
-/* ES2 */
-.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
-/* 3410 */
-.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
-
-/* 38.4MHz */
-/* ES1 */
-.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1
-/* ES2 */
-.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
-/* 3410 */
-.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
-
-.globl get_core_dpll_param
-get_core_dpll_param:
- adr r0, core_dpll_param
- mov pc, lr
-
-/* PER DPLL values are same for both ES1 and ES2 */
-per_dpll_param:
-/* 12MHz */
-.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12
-
-/* 13MHz */
-.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13
-
-/* 19.2MHz */
-.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2
-
-/* 26MHz */
-.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26
-
-/* 38.4MHz */
-.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4
-
-.globl get_per_dpll_param
-get_per_dpll_param:
- adr r0, per_dpll_param
- mov pc, lr
projects / u-boot / blobdiff