arm: Move cpu/$CPU to arch/arm/cpu/$CPU

[u-boot] / cpu / arm_cortexa8 / omap3 / timer.c

diff --git a/cpu/arm_cortexa8/omap3/timer.c b/cpu/arm_cortexa8/omap3/timer.c
deleted file mode 100644 (file)
index 401bfe6..0000000
--- a/cpu/arm_cortexa8/omap3/timer.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2008
- * Texas Instruments
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Moahmmed Khasim <khasim@ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-static ulong timestamp;
-static ulong lastinc;
-static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
-
-/*
- * Nothing really to do with interrupts, just starts up a counter.
- * We run the counter with 13MHz, divided by 8, resulting in timer
- * frequency of 1.625MHz. With 32bit counter register, counter
- * overflows in ~44min
- */
-
-/* 13MHz / 8 = 1.625MHz */
-#define TIMER_CLOCK    (V_SCLK / (2 << CONFIG_SYS_PTV))
-#define TIMER_LOAD_VAL 0xffffffff
-
-int timer_init(void)
-{
-       /* start the counter ticking up, reload value on overflow */
-       writel(TIMER_LOAD_VAL, &timer_base->tldr);
-       /* enable timer */
-       writel((CONFIG_SYS_PTV << 2) | TCLR_PRE | TCLR_AR | TCLR_ST,
-               &timer_base->tclr);
-
-       reset_timer_masked();   /* init the timestamp and lastinc value */
-
-       return 0;
-}
-
-/*
- * timer without interrupts
- */
-void reset_timer(void)
-{
-       reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-       return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-       timestamp = t;
-}
-
-/* delay x useconds */
-void __udelay(unsigned long usec)
-{
-       long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
-       unsigned long now, last = readl(&timer_base->tcrr);
-
-       while (tmo > 0) {
-               now = readl(&timer_base->tcrr);
-               if (last > now) /* count up timer overflow */
-                       tmo -= TIMER_LOAD_VAL - last + now;
-               else
-                       tmo -= now - last;
-               last = now;
-       }
-}
-
-void reset_timer_masked(void)
-{
-       /* reset time, capture current incrementer value time */
-       lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-       timestamp = 0;          /* start "advancing" time stamp from 0 */
-}
-
-ulong get_timer_masked(void)
-{
-       /* current tick value */
-       ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-
-       if (now >= lastinc)     /* normal mode (non roll) */
-               /* move stamp fordward with absoulte diff ticks */
-               timestamp += (now - lastinc);
-       else    /* we have rollover of incrementer */
-               timestamp += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ))
-                               - lastinc) + now;
-       lastinc = now;
-       return timestamp;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-       return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-       return CONFIG_SYS_HZ;
-}