+++ /dev/null
-/**
- * @file IxNpeDlNpeMgrEcRegisters_p.h
- *
- * @author Intel Corporation
- * @date 14 December 2001
-
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Intel Corporation nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @par
- * -- End of Copyright Notice --
-*/
-
-
-#ifndef IXNPEDLNPEMGRECREGISTERS_P_H
-#define IXNPEDLNPEMGRECREGISTERS_P_H
-
-#include "IxOsal.h"
-
-/*
- * Base Memory Addresses for accessing NPE registers
- */
-
-#define IX_NPEDL_NPE_BASE (IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE)
-
-#define IX_NPEDL_NPEA_OFFSET (0x6000) /**< NPE-A register base offset */
-#define IX_NPEDL_NPEB_OFFSET (0x7000) /**< NPE-B register base offset */
-#define IX_NPEDL_NPEC_OFFSET (0x8000) /**< NPE-C register base offset */
-
-/**
- * @def IX_NPEDL_NPEBASEADDRESS_NPEA
- * @brief Base Memory Address of NPE-A Configuration Bus registers
- */
-#define IX_NPEDL_NPEBASEADDRESS_NPEA (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEA_OFFSET)
-
-/**
- * @def IX_NPEDL_NPEBASEADDRESS_NPEB
- * @brief Base Memory Address of NPE-B Configuration Bus registers
- */
-#define IX_NPEDL_NPEBASEADDRESS_NPEB (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEB_OFFSET)
-
-/**
- * @def IX_NPEDL_NPEBASEADDRESS_NPEC
- * @brief Base Memory Address of NPE-C Configuration Bus registers
- */
-#define IX_NPEDL_NPEBASEADDRESS_NPEC (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEC_OFFSET)
-
-
-/*
- * Instruction Memory Size (in words) for each NPE
- */
-
-/**
- * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEA
- * @brief Size (in words) of NPE-A Instruction Memory
- */
-#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEA 4096
-
-/**
- * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEB
- * @brief Size (in words) of NPE-B Instruction Memory
- */
-#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEB 2048
-
-/**
- * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEC
- * @brief Size (in words) of NPE-B Instruction Memory
- */
-#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEC 2048
-
-
-/*
- * Data Memory Size (in words) for each NPE
- */
-
-/**
- * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA
- * @brief Size (in words) of NPE-A Data Memory
- */
-#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA 2048
-
-/**
- * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB
- * @brief Size (in words) of NPE-B Data Memory
- */
-#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB 2048
-
-/**
- * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC
- * @brief Size (in words) of NPE-C Data Memory
- */
-#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC 2048
-
-
-/*
- * Configuration Bus Register offsets (in bytes) from NPE Base Address
- */
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXAD
- * @brief Offset (in bytes) of EXAD (Execution Address) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_EXAD 0x00000000
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXDATA
- * @brief Offset (in bytes) of EXDATA (Execution Data) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_EXDATA 0x00000004
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXCTL
- * @brief Offset (in bytes) of EXCTL (Execution Control) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_EXCTL 0x00000008
-
-/**
- * @def IX_NPEDL_REG_OFFSET_EXCT
- * @brief Offset (in bytes) of EXCT (Execution Count) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_EXCT 0x0000000C
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP0
- * @brief Offset (in bytes) of AP0 (Action Point 0) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_AP0 0x00000010
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP1
- * @brief Offset (in bytes) of AP1 (Action Point 1) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_AP1 0x00000014
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP2
- * @brief Offset (in bytes) of AP2 (Action Point 2) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_AP2 0x00000018
-
-/**
- * @def IX_NPEDL_REG_OFFSET_AP3
- * @brief Offset (in bytes) of AP3 (Action Point 3) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_AP3 0x0000001C
-
-/**
- * @def IX_NPEDL_REG_OFFSET_WFIFO
- * @brief Offset (in bytes) of WFIFO (Watchpoint FIFO) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_WFIFO 0x00000020
-
-/**
- * @def IX_NPEDL_REG_OFFSET_WC
- * @brief Offset (in bytes) of WC (Watch Count) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_WC 0x00000024
-
-/**
- * @def IX_NPEDL_REG_OFFSET_PROFCT
- * @brief Offset (in bytes) of PROFCT (Profile Count) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_PROFCT 0x00000028
-
-/**
- * @def IX_NPEDL_REG_OFFSET_STAT
- * @brief Offset (in bytes) of STAT (Messaging Status) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_STAT 0x0000002C
-
-/**
- * @def IX_NPEDL_REG_OFFSET_CTL
- * @brief Offset (in bytes) of CTL (Messaging Control) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_CTL 0x00000030
-
-/**
- * @def IX_NPEDL_REG_OFFSET_MBST
- * @brief Offset (in bytes) of MBST (Mailbox Status) register from NPE Base
- * Address
- */
-#define IX_NPEDL_REG_OFFSET_MBST 0x00000034
-
-/**
- * @def IX_NPEDL_REG_OFFSET_FIFO
- * @brief Offset (in bytes) of FIFO (messaging in/out FIFO) register from NPE
- * Base Address
- */
-#define IX_NPEDL_REG_OFFSET_FIFO 0x00000038
-
-
-/*
- * Non-zero reset values for the Configuration Bus registers
- */
-
-/**
- * @def IX_NPEDL_REG_RESET_FIFO
- * @brief Reset value for Mailbox (MBST) register
- * NOTE that if used, it should be complemented with an NPE intruction
- * to clear the Mailbox at the NPE side as well
- */
-#define IX_NPEDL_REG_RESET_MBST 0x0000F0F0
-
-
-/*
- * Bit-masks used to read/write particular bits in Configuration Bus registers
- */
-
-/**
- * @def IX_NPEDL_MASK_WFIFO_VALID
- * @brief Masks the VALID bit in the WFIFO register
- */
-#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000
-
-/**
- * @def IX_NPEDL_MASK_STAT_OFNE
- * @brief Masks the OFNE bit in the STAT register
- */
-#define IX_NPEDL_MASK_STAT_OFNE 0x00010000
-
-/**
- * @def IX_NPEDL_MASK_STAT_IFNE
- * @brief Masks the IFNE bit in the STAT register
- */
-#define IX_NPEDL_MASK_STAT_IFNE 0x00080000
-
-
-/*
- * EXCTL (Execution Control) Register commands
-*/
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_STEP
- * @brief EXCTL Command to Step execution of an NPE Instruction
- */
-
-#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_START
- * @brief EXCTL Command to Start NPE execution
- */
-#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_STOP
- * @brief EXCTL Command to Stop NPE execution
- */
-#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE
- * @brief EXCTL Command to Clear NPE instruction pipeline
- */
-#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_RD_INS_MEM
- * @brief EXCTL Command to read NPE instruction memory at address in EXAD
- * register and return value in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_WR_INS_MEM
- * @brief EXCTL Command to write NPE instruction memory at address in EXAD
- * register with data in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_RD_DATA_MEM
- * @brief EXCTL Command to read NPE data memory at address in EXAD
- * register and return value in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_WR_DATA_MEM
- * @brief EXCTL Command to write NPE data memory at address in EXAD
- * register with data in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_RD_ECS_REG
- * @brief EXCTL Command to read Execution Access register at address in EXAD
- * register and return value in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_WR_ECS_REG
- * @brief EXCTL Command to write Execution Access register at address in EXAD
- * register with data in EXDATA register
- */
-#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15
-
-/**
- * @def IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT
- * @brief EXCTL Command to clear Profile Count register
- */
-#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C
-
-
-/*
- * EXCTL (Execution Control) Register status bit masks
- */
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_RUN
- * @brief Masks the RUN status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_STOP
- * @brief Masks the STOP status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_CLEAR
- * @brief Masks the CLEAR status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000
-
-/**
- * @def IX_NPEDL_EXCTL_STATUS_ECS_K
- * @brief Masks the K (pipeline Klean) status bit in the EXCTL register
- */
-#define IX_NPEDL_EXCTL_STATUS_ECS_K 0x00800000
-
-
-/*
- * Executing Context Stack (ECS) level registers
- */
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Backgound
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_0 0x00
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Backgound
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_1 0x01
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Backgound
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_2 0x02
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Priority 1
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Priority 1
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1 0x05
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Priority 1
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2 0x06
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Priority 2
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Priority 2
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1 0x09
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Priority 2
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2 0x0A
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_0
- * @brief Execution Access register address for register 0 at Debug
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_1
- * @brief Execution Access register address for register 1 at Debug
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_1 0x0D
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_2
- * @brief Execution Access register address for register 2 at Debug
- * Executing Context Stack level
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_2 0x0E
-
-/**
- * @def IX_NPEDL_ECS_INSTRUCT_REG
- * @brief Execution Access register address for NPE Instruction Register
- */
-#define IX_NPEDL_ECS_INSTRUCT_REG 0x11
-
-
-/*
- * Execution Access register reset values
- */
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Background ECS level register 0
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_0_RESET 0xA0000000
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Background ECS level register 1
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_1_RESET 0x01000000
-
-/**
- * @def IX_NPEDL_ECS_BG_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Background ECS level register 2
- */
-#define IX_NPEDL_ECS_BG_CTXT_REG_2_RESET 0x00008000
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Priority 1 ECS level register 0
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET 0x20000080
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Priority 1 ECS level register 1
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET 0x01000000
-
-/**
- * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Priority 1 ECS level register 2
- */
-#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET 0x00008000
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Priority 2 ECS level register 0
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET 0x20000080
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Priority 2 ECS level register 1
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET 0x01000000
-
-/**
- * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Priority 2 ECS level register 2
- */
-#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET 0x00008000
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET
- * @brief Reset value for Execution Access Debug ECS level register 0
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET 0x20000000
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET
- * @brief Reset value for Execution Access Debug ECS level register 1
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET 0x00000000
-
-/**
- * @def IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET
- * @brief Reset value for Execution Access Debug ECS level register 2
- */
-#define IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET 0x001E0000
-
-/**
- * @def IX_NPEDL_ECS_INSTRUCT_REG_RESET
- * @brief Reset value for Execution Access NPE Instruction Register
- */
-#define IX_NPEDL_ECS_INSTRUCT_REG_RESET 0x1003C00F
-
-
-/*
- * masks used to read/write particular bits in Execution Access registers
- */
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_0_ACTIVE
- * @brief Mask the A (Active) bit in Execution Access Register 0 of all ECS
- * levels
- */
-#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_0_NEXTPC
- * @brief Mask the NextPC bits in Execution Access Register 0 of all ECS
- * levels (except Debug ECS level)
- */
-#define IX_NPEDL_MASK_ECS_REG_0_NEXTPC 0x1FFF0000
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_0_LDUR
- * @brief Mask the LDUR bits in Execution Access Register 0 of all ECS levels
- */
-#define IX_NPEDL_MASK_ECS_REG_0_LDUR 0x00000700
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_1_CCTXT
- * @brief Mask the NextPC bits in Execution Access Register 1 of all ECS levels
- */
-#define IX_NPEDL_MASK_ECS_REG_1_CCTXT 0x000F0000
-
-/**
- * @def IX_NPEDL_MASK_ECS_REG_1_SELCTXT
- * @brief Mask the NextPC bits in Execution Access Register 1 of all ECS levels
- */
-#define IX_NPEDL_MASK_ECS_REG_1_SELCTXT 0x0000000F
-
-/**
- * @def IX_NPEDL_MASK_ECS_DBG_REG_2_IF
- * @brief Mask the IF bit in Execution Access Register 2 of Debug ECS level
- */
-#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000
-
-/**
- * @def IX_NPEDL_MASK_ECS_DBG_REG_2_IE
- * @brief Mask the IE bit in Execution Access Register 2 of Debug ECS level
- */
-#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000
-
-
-/*
- * Bit-Offsets from LSB of particular bit-fields in Execution Access registers
- */
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC
- * @brief LSB-offset of NextPC field in Execution Access Register 0 of all ECS
- * levels (except Debug ECS level)
- */
-#define IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC 16
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_0_LDUR
- * @brief LSB-offset of LDUR field in Execution Access Register 0 of all ECS
- * levels
- */
-#define IX_NPEDL_OFFSET_ECS_REG_0_LDUR 8
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_1_CCTXT
- * @brief LSB-offset of CCTXT field in Execution Access Register 1 of all ECS
- * levels
- */
-#define IX_NPEDL_OFFSET_ECS_REG_1_CCTXT 16
-
-/**
- * @def IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT
- * @brief LSB-offset of SELCTXT field in Execution Access Register 1 of all ECS
- * levels
- */
-#define IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT 0
-
-
-/*
- * NPE core & co-processor instruction templates to load into NPE Instruction
- * Register, for read/write of NPE register file registers
- */
-
-/**
- * @def IX_NPEDL_INSTR_RD_REG_BYTE
- * @brief NPE Instruction, used to read an 8-bit NPE internal logical register
- * and return the value in the EXDATA register (aligned to MSB).
- * NPE Assembler instruction: "mov8 d0, d0 &&& DBG_WrExec"
- */
-#define IX_NPEDL_INSTR_RD_REG_BYTE 0x0FC00000
-
-/**
- * @def IX_NPEDL_INSTR_RD_REG_SHORT
- * @brief NPE Instruction, used to read a 16-bit NPE internal logical register
- * and return the value in the EXDATA register (aligned to MSB).
- * NPE Assembler instruction: "mov16 d0, d0 &&& DBG_WrExec"
- */
-#define IX_NPEDL_INSTR_RD_REG_SHORT 0x0FC08010
-
-/**
- * @def IX_NPEDL_INSTR_RD_REG_WORD
- * @brief NPE Instruction, used to read a 16-bit NPE internal logical register
- * and return the value in the EXDATA register.
- * NPE Assembler instruction: "mov32 d0, d0 &&& DBG_WrExec"
- */
-#define IX_NPEDL_INSTR_RD_REG_WORD 0x0FC08210
-
-/**
- * @def IX_NPEDL_INSTR_WR_REG_BYTE
- * @brief NPE Immediate-Mode Instruction, used to write an 8-bit NPE internal
- * logical register.
- * NPE Assembler instruction: "mov8 d0, #0"
- */
-#define IX_NPEDL_INSTR_WR_REG_BYTE 0x00004000
-
-/**
- * @def IX_NPEDL_INSTR_WR_REG_SHORT
- * @brief NPE Immediate-Mode Instruction, used to write a 16-bit NPE internal
- * logical register.
- * NPE Assembler instruction: "mov16 d0, #0"
- */
-#define IX_NPEDL_INSTR_WR_REG_SHORT 0x0000C000
-
-/**
- * @def IX_NPEDL_INSTR_RD_FIFO
- * @brief NPE Immediate-Mode Instruction, used to write a 16-bit NPE internal
- * logical register.
- * NPE Assembler instruction: "cprd32 d0 &&& DBG_RdInFIFO"
- */
-#define IX_NPEDL_INSTR_RD_FIFO 0x0F888220
-
-/**
- * @def IX_NPEDL_INSTR_RESET_MBOX
- * @brief NPE Instruction, used to reset Mailbox (MBST) register
- * NPE Assembler instruction: "mov32 d0, d0 &&& DBG_ClearM"
- */
-#define IX_NPEDL_INSTR_RESET_MBOX 0x0FAC8210
-
-
-/*
- * Bit-offsets from LSB, of particular bit-fields in an NPE instruction
- */
-
-/**
- * @def IX_NPEDL_OFFSET_INSTR_SRC
- * @brief LSB-offset to SRC (source operand) field of an NPE Instruction
- */
-#define IX_NPEDL_OFFSET_INSTR_SRC 4
-
-/**
- * @def IX_NPEDL_OFFSET_INSTR_DEST
- * @brief LSB-offset to DEST (destination operand) field of an NPE Instruction
- */
-#define IX_NPEDL_OFFSET_INSTR_DEST 9
-
-/**
- * @def IX_NPEDL_OFFSET_INSTR_COPROC
- * @brief LSB-offset to COPROC (coprocessor instruction) field of an NPE
- * Instruction
- */
-#define IX_NPEDL_OFFSET_INSTR_COPROC 18
-
-
-/*
- * masks used to read/write particular bits of an NPE Instruction
- */
-
-/**
- * @def IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA
- * @brief Mask the bits of 16-bit data value (least-sig 5 bits) to be used in
- * SRC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA 0x1F
-
-/**
- * @def IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA
- * @brief Mask the bits of 16-bit data value (most-sig 11 bits) to be used in
- * COPROC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA 0xFFE0
-
-/**
- * @def IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA
- * @brief LSB offset of the bit-field of 16-bit data value (most-sig 11 bits)
- * to be used in COPROC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA 5
-
-/**
- * @def IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA
- * @brief Number of left-shifts required to align most-sig 11 bits of 16-bit
- * data value into COPROC field of immediate-mode NPE instruction
- */
-#define IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA \
- (IX_NPEDL_OFFSET_INSTR_COPROC - IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA)
-
-/**
- * @def IX_NPEDL_WR_INSTR_LDUR
- * @brief LDUR value used with immediate-mode NPE Instructions by the NpeDl
- * for writing to NPE internal logical registers
- */
-#define IX_NPEDL_WR_INSTR_LDUR 1
-
-/**
- * @def IX_NPEDL_RD_INSTR_LDUR
- * @brief LDUR value used with NON-immediate-mode NPE Instructions by the NpeDl
- * for reading from NPE internal logical registers
- */
-#define IX_NPEDL_RD_INSTR_LDUR 0
-
-
-/**
- * @enum IxNpeDlCtxtRegNum
- * @brief Numeric values to identify the NPE internal Context Store registers
- */
-typedef enum
-{
- IX_NPEDL_CTXT_REG_STEVT = 0, /**< identifies STEVT */
- IX_NPEDL_CTXT_REG_STARTPC, /**< identifies STARTPC */
- IX_NPEDL_CTXT_REG_REGMAP, /**< identifies REGMAP */
- IX_NPEDL_CTXT_REG_CINDEX, /**< identifies CINDEX */
- IX_NPEDL_CTXT_REG_MAX /**< Total number of Context Store registers */
-} IxNpeDlCtxtRegNum;
-
-
-/*
- * NPE Context Store register logical addresses
- */
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_STEVT
- * @brief Logical address of STEVT NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_STEVT 0x0000001B
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_STARTPC
- * @brief Logical address of STARTPC NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_STARTPC 0x0000001C
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_REGMAP
- * @brief Logical address of REGMAP NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_REGMAP 0x0000001E
-
-/**
- * @def IX_NPEDL_CTXT_REG_ADDR_CINDEX
- * @brief Logical address of CINDEX NPE internal Context Store register
- */
-#define IX_NPEDL_CTXT_REG_ADDR_CINDEX 0x0000001F
-
-
-/*
- * NPE Context Store register reset values
- */
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_STEVT
- * @brief Reset value of STEVT NPE internal Context Store register
- * (STEVT = off, 0x80)
- */
-#define IX_NPEDL_CTXT_REG_RESET_STEVT 0x80
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_STARTPC
- * @brief Reset value of STARTPC NPE internal Context Store register
- * (STARTPC = 0x0000)
- */
-#define IX_NPEDL_CTXT_REG_RESET_STARTPC 0x0000
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_REGMAP
- * @brief Reset value of REGMAP NPE internal Context Store register
- * (REGMAP = d0->p0, d8->p2, d16->p4)
- */
-#define IX_NPEDL_CTXT_REG_RESET_REGMAP 0x0820
-
-/**
- * @def IX_NPEDL_CTXT_REG_RESET_CINDEX
- * @brief Reset value of CINDEX NPE internal Context Store register
- * (CINDEX = 0)
- */
-#define IX_NPEDL_CTXT_REG_RESET_CINDEX 0x00
-
-
-/*
- * numeric range of context levels available on an NPE
- */
-
-/**
- * @def IX_NPEDL_CTXT_NUM_MIN
- * @brief Lowest NPE Context number in range
- */
-#define IX_NPEDL_CTXT_NUM_MIN 0
-
-/**
- * @def IX_NPEDL_CTXT_NUM_MAX
- * @brief Highest NPE Context number in range
- */
-#define IX_NPEDL_CTXT_NUM_MAX 15
-
-
-/*
- * Physical NPE internal registers
- */
-
-/**
- * @def IX_NPEDL_TOTAL_NUM_PHYS_REG
- * @brief Number of Physical registers currently supported
- * Initial NPE implementations will have a 32-word register file.
- * Later implementations may have a 64-word register file.
- */
-#define IX_NPEDL_TOTAL_NUM_PHYS_REG 32
-
-/**
- * @def IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP
- * @brief LSB-offset of Regmap number in Physical NPE register address, used
- * for Physical To Logical register address mapping in the NPE
- */
-#define IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP 1
-
-/**
- * @def IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR
- * @brief Mask to extract a logical NPE register address from a physical
- * register address, used for Physical To Logical address mapping
- */
-#define IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR 0x1
-
-#endif /* IXNPEDLNPEMGRECREGISTERS_P_H */
projects / u-boot / blobdiff