* Add support for ext2 filesystems and image timestamps to TQM5200 board

[u-boot] / cpu / mpc5xxx / fec.c

diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 81b932ca186defda284a550ee16f427ff192a1fa..21632722d3f4cbbb958effb5d6d36df874af0f91 100644 (file)
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -115,7 +115,7 @@ static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec)
 }
 
 /********************************************************************/
-static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, FEC_RBD * pRbd)
+static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd)
 {
        /*
         * Reset buffer descriptor as empty
@@ -141,7 +141,7 @@ static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, FEC_RBD * pRbd)
 /********************************************************************/
 static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec)
 {
-       FEC_TBD *pUsedTbd;
+       volatile FEC_TBD *pUsedTbd;
 
 #if (DEBUG & 0x1)
        printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
@@ -354,10 +354,10 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
        /*
         * Initialize SmartDMA parameters stored in SRAM
         */
-       *(int *)FEC_TBD_BASE = (int)fec->tbdBase;
-       *(int *)FEC_RBD_BASE = (int)fec->rbdBase;
-       *(int *)FEC_TBD_NEXT = (int)fec->tbdBase;
-       *(int *)FEC_RBD_NEXT = (int)fec->rbdBase;
+       *(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase;
+       *(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase;
+       *(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase;
+       *(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase;
 
        /*
         * Enable FEC-Lite controller
@@ -688,7 +688,7 @@ static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data,
         * 6-byte Ethernet addresses.
         */
        mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
-       FEC_TBD *pTbd;
+       volatile FEC_TBD *pTbd;
 
 #if (DEBUG & 0x20)
        printf("tbd status: 0x%04x\n", fec->tbdBase[0].status);
@@ -779,7 +779,7 @@ static int mpc5xxx_fec_recv(struct eth_device *dev)
         * This command pulls one frame from the card
         */
        mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
-       FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
+       volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
        unsigned long ievent;
        int frame_length, len = 0;
        NBUF *frame;
@@ -870,7 +870,8 @@ int mpc5xxx_fec_initialize(bd_t * bis)
        fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
        fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
 #if defined(CONFIG_ICECUBE) || defined(CONFIG_PM520)   || \
-    defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200)
+    defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200) || \
+    defined(CONFIG_INKA4X0)
 # ifndef CONFIG_FEC_10MBIT
        fec->xcv_type = MII100;
 # else