usb: musb: make sure the register layout is packed

[u-boot] / cpu / mpc83xx / fdt.c

diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index f21c54e80bc295e25bb5aaacc7643bdca3bf9d39..daf73a6e5ab164fba02beb5ea046be87b1a7c56d 100644 (file)
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -24,19 +24,90 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <asm/processor.h>
+
+extern void ft_qe_setup(void *blob);
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
+#include <asm/immap_qe.h>
+
+void fdt_fixup_muram (void *blob)
+{
+       ulong data[2];
+
+       data[0] = 0;
+       data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
+       do_fixup_by_compat(blob, "fsl,qe-muram-data", "reg",
+                       data, sizeof (data), 0);
+}
+#endif
+
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
+       immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+       int spridr = immr->sysconf.spridr;
+
+       /*
+        * delete crypto node if not on an E-processor
+        * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
+        * EA revisions got the SEC uprevved to 2.4 but since the default device
+        * tree contains SEC 2.0 properties we uprev them here.
+        */
+       if (!IS_E_PROCESSOR(spridr))
+               fdt_fixup_crypto_node(blob, 0);
+       else if (IS_E_PROCESSOR(spridr) &&
+                (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
+                 SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
+                REVID_MAJOR(spridr) >= 2)
+               fdt_fixup_crypto_node(blob, 0x0204);
+
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
-    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
-       fdt_fixup_ethernet(blob, bd);
+    defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
+    defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
+       fdt_fixup_ethernet(blob);
+#ifdef CONFIG_MPC8313
+       /*
+       * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
+       * h/w (see AN3545).  The base device tree in use has rev. 1 ID numbers,
+       * so if on Rev. 2 (and higher) h/w, we fix them up here
+       */
+       if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
+               int nodeoffset, path;
+               const char *prop;
+
+               nodeoffset = fdt_path_offset(blob, "/aliases");
+               if (nodeoffset >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+                       prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+                       if (prop) {
+                               u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
+
+                               path = fdt_path_offset(blob, prop);
+                               prop = fdt_getprop(blob, path, "interrupts", 0);
+                               if (prop)
+                                       fdt_setprop(blob, path, "interrupts",
+                                                   &tmp, sizeof(tmp));
+                       }
+#endif
+#if defined(CONFIG_HAS_ETH1)
+                       prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+                       if (prop) {
+                               u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
+
+                               path = fdt_path_offset(blob, prop);
+                               prop = fdt_getprop(blob, path, "interrupts", 0);
+                               if (prop)
+                                       fdt_setprop(blob, path, "interrupts",
+                                                   &tmp, sizeof(tmp));
+                       }
+#endif
+               }
+       }
+#endif
 #endif
 
        do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
@@ -47,26 +118,26 @@ void ft_cpu_setup(void *blob, bd_t *bd)
                "clock-frequency", gd->core_clk, 1);
        do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
                "bus-frequency", bd->bi_busfreq, 1);
+       do_fixup_by_compat_u32(blob, "fsl,soc",
+               "bus-frequency", bd->bi_busfreq, 1);
+       do_fixup_by_compat_u32(blob, "fsl,soc",
+               "clock-frequency", bd->bi_busfreq, 1);
+       do_fixup_by_compat_u32(blob, "fsl,immr",
+               "bus-frequency", bd->bi_busfreq, 1);
+       do_fixup_by_compat_u32(blob, "fsl,immr",
+               "clock-frequency", bd->bi_busfreq, 1);
 #ifdef CONFIG_QE
-       do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
-               "bus-frequency", gd->qe_clk, 1);
-       do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
-               "brg-frequency", gd->brg_clk, 1);
+       ft_qe_setup(blob);
 #endif
 
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
        do_fixup_by_compat_u32(blob, "ns16550",
-               "clock-frequency", bd->bi_busfreq, 1);
+               "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 #endif
 
-#ifdef CONFIG_CPM2
-       do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
-               "current-speed", bd->bi_baudrate, 1);
+       fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
-       do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
-               "clock-frequency", bd->bi_brgfreq, 1);
+#if defined(CONFIG_BOOTCOUNT_LIMIT)
+       fdt_fixup_muram (blob);
 #endif
-
-       fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
-#endif /* CONFIG_OF_LIBFDT */