* MA 02111-1307 USA
*/
+#include <config.h>
#include <common.h>
#include <watchdog.h>
#include <command.h>
+#include <tsec.h>
#include <asm/cache.h>
#include <asm/io.h>
struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(8533, 8533),
CPU_TYPE_ENTRY(8533, 8533_E),
+ CPU_TYPE_ENTRY(8536, 8536),
+ CPU_TYPE_ENTRY(8536, 8536_E),
CPU_TYPE_ENTRY(8540, 8540),
CPU_TYPE_ENTRY(8541, 8541),
CPU_TYPE_ENTRY(8541, 8541_E),
CPU_TYPE_ENTRY(8572, 8572_E),
};
-struct cpu_type *identify_cpu(uint ver)
+struct cpu_type *identify_cpu(u32 ver)
{
int i;
for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
uint major, minor;
struct cpu_type *cpu;
#ifdef CONFIG_DDR_CLK_FREQ
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
#endif
svr = get_svr();
ver = SVR_SOC_VER(svr);
major = SVR_MAJ(svr);
+#ifdef CONFIG_MPC8536
+ major &= 0x7; /* the msb of this nibble is a mfg code */
+#endif
minor = SVR_MIN(svr);
+#if (CONFIG_NUM_CPUS > 1)
+ volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
+ printf("CPU%d: ", pic->whoami);
+#else
puts("CPU: ");
+#endif
cpu = identify_cpu(ver);
if (cpu) {
puts(cpu->name);
- if (svr & 0x80000)
+ if (IS_E_PROCESSOR(svr))
puts("E");
} else {
puts("Unknown");
break;
}
-#if defined(CFG_LBC_LCRR)
- lcrr = CFG_LBC_LCRR;
+#if defined(CONFIG_SYS_LBC_LCRR)
+ lcrr = CONFIG_SYS_LBC_LCRR;
#else
{
- volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
lcrr = lbc->lcrr;
}
#endif
clkdiv = lcrr & 0x0f;
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544)
+#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
+ defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536)
/*
* Yes, the entire PQ38 family use the same
* bit-representation for twice the clock divider values.
if (ver & 1){
/* e500 v2 core has reset control register */
volatile unsigned int * rstcr;
- rstcr = (volatile unsigned int *)(CFG_IMMR + 0xE00B0);
+ rstcr = (volatile unsigned int *)(CONFIG_SYS_IMMR + 0xE00B0);
*rstcr = 0x2; /* HRESET_REQ */
udelay(100);
}
#if defined(CONFIG_DDR_ECC)
void dma_init(void) {
- volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
+ volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
dma->satr0 = 0x02c40000;
dma->datr0 = 0x02c40000;
}
uint dma_check(void) {
- volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
+ volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
volatile uint status = dma->sr0;
/* While the channel is busy, spin */
}
int dma_xfer(void *dest, uint count, void *src) {
- volatile ccsr_dma_t *dma = (void *)(CFG_MPC85xx_DMA_ADDR);
+ volatile ccsr_dma_t *dma = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR);
dma->dar0 = (uint) dest;
dma->sar0 = (uint) src;
return dma_check();
}
#endif
+
/*
- * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF)
- * are hardcoded as "1"."size" is the number or entries, not a sizeof.
+ * Configures a UPM. The function requires the respective MxMR to be set
+ * before calling this function. "size" is the number or entries, not a sizeof.
*/
void upmconfig (uint upm, uint * table, uint size)
{
int i, mdr, mad, old_mad = 0;
volatile u32 *mxmr;
- volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
- int loopval = 0x00004440;
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
volatile u32 *brp,*orp;
volatile u8* dummy = NULL;
int upmmask;
/* Find the address for the dummy write transaction */
for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
i++, brp += 2, orp += 2) {
-
+
/* Look for a valid BR with selected UPM */
- if ((in_be32(brp) & (BR_V | upmmask)) == (BR_V | upmmask)) {
- dummy = (volatile u8*)(in_be32(brp) >> BR_BA_SHIFT);
+ if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
+ dummy = (volatile u8*)(in_be32(brp) & BR_BA);
break;
}
}
for (i = 0; i < size; i++) {
/* 1 */
- out_be32(mxmr, loopval | 0x10000000 | i); /* OP_WRITE */
+ out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
/* 2 */
out_be32(&lbc->mdr, table[i]);
/* 3 */
*(volatile u8 *)dummy = 0;
/* 5 */
do {
- mad = in_be32(mxmr) & 0x3f;
+ mad = in_be32(mxmr) & MxMR_MAD_MSK;
} while (mad <= old_mad && !(!mad && i == (size-1)));
old_mad = mad;
}
- out_be32(mxmr, loopval); /* OP_NORMAL */
+ out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
+}
+
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85xx_FEC)
+ tsec_standard_init(bis);
+#endif
+
+ return 0;
}