#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
+#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_MPC8536
+extern void fsl_serdes_init(void);
+#endif
+
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
/* We run cpu_init_early_f in AS = 1 */
void cpu_init_early_f(void)
{
- set_tlb(0, CFG_CCSRBAR, CFG_CCSRBAR,
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
+ set_tlb(0, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
1, 0, BOOKE_PAGESZ_4K, 0);
/* set up CCSR if we want it moved */
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
{
u32 temp;
+ volatile u32 *ccsr_virt =
+ (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
- set_tlb(0, CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR_DEFAULT,
+ set_tlb(0, (u32)ccsr_virt, CONFIG_SYS_CCSRBAR_DEFAULT,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
1, 1, BOOKE_PAGESZ_4K, 0);
- temp = in_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT);
- out_be32((volatile u32 *)CFG_CCSRBAR_DEFAULT, CFG_CCSRBAR >> 12);
-
- temp = in_be32((volatile u32 *)CFG_CCSRBAR);
+ temp = in_be32(ccsr_virt);
+ out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
+ temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
}
#endif
init_laws();
invalidate_tlb(0);
-#ifdef CONFIG_FSL_INIT_TLBS
init_tlbs();
-#else
- {
- extern u32 tlb1_entry;
- u32 *tmp = &tlb1_entry;
- int i;
- int num = tmp[2];
-
- /* skip to actual table */
- tmp += 3;
-
- for (i = 0; i < num; i++, tmp += 4) {
- mtspr(MAS0, tmp[0]);
- mtspr(MAS1, tmp[1]);
- mtspr(MAS2, tmp[2]);
- mtspr(MAS3, tmp[3]);
- asm volatile("isync;msync;tlbwe;isync");
- }
- }
-#endif
}
/*
void cpu_init_f (void)
{
- volatile ccsr_lbc_t *memctl = (void *)(CFG_MPC85xx_LBC_ADDR);
+ volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
extern void m8560_cpm_reset (void);
+#ifdef CONFIG_MPC8548
+ ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+ uint svr = get_svr();
+
+ /*
+ * CPU2 errata workaround: A core hang possible while executing
+ * a msync instruction and a snoopable transaction from an I/O
+ * master tagged to make quick forward progress is present.
+ * Fixed in silicon rev 2.1.
+ */
+ if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
+ out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
+#endif
disable_tlb(14);
disable_tlb(15);
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
#ifdef CONFIG_CPM2
- config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
+ config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
#endif
/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
* addresses - these have to be modified later when FLASH size
* has been determined
*/
-#if defined(CFG_OR0_REMAP)
- memctl->or0 = CFG_OR0_REMAP;
+#if defined(CONFIG_SYS_OR0_REMAP)
+ memctl->or0 = CONFIG_SYS_OR0_REMAP;
#endif
-#if defined(CFG_OR1_REMAP)
- memctl->or1 = CFG_OR1_REMAP;
+#if defined(CONFIG_SYS_OR1_REMAP)
+ memctl->or1 = CONFIG_SYS_OR1_REMAP;
#endif
/* now restrict to preliminary range */
/* if cs1 is already set via debugger, leave cs0/cs1 alone */
if (! memctl->br1 & 1) {
-#if defined(CFG_BR0_PRELIM) && defined(CFG_OR0_PRELIM)
- memctl->br0 = CFG_BR0_PRELIM;
- memctl->or0 = CFG_OR0_PRELIM;
+#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
+ memctl->br0 = CONFIG_SYS_BR0_PRELIM;
+ memctl->or0 = CONFIG_SYS_OR0_PRELIM;
#endif
-#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
- memctl->or1 = CFG_OR1_PRELIM;
- memctl->br1 = CFG_BR1_PRELIM;
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+ memctl->or1 = CONFIG_SYS_OR1_PRELIM;
+ memctl->br1 = CONFIG_SYS_BR1_PRELIM;
#endif
}
-#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
- memctl->or2 = CFG_OR2_PRELIM;
- memctl->br2 = CFG_BR2_PRELIM;
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+ memctl->or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->br2 = CONFIG_SYS_BR2_PRELIM;
#endif
-#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
- memctl->or3 = CFG_OR3_PRELIM;
- memctl->br3 = CFG_BR3_PRELIM;
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+ memctl->or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->br3 = CONFIG_SYS_BR3_PRELIM;
#endif
-#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
- memctl->or4 = CFG_OR4_PRELIM;
- memctl->br4 = CFG_BR4_PRELIM;
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+ memctl->or4 = CONFIG_SYS_OR4_PRELIM;
+ memctl->br4 = CONFIG_SYS_BR4_PRELIM;
#endif
-#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
- memctl->or5 = CFG_OR5_PRELIM;
- memctl->br5 = CFG_BR5_PRELIM;
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+ memctl->or5 = CONFIG_SYS_OR5_PRELIM;
+ memctl->br5 = CONFIG_SYS_BR5_PRELIM;
#endif
-#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
- memctl->or6 = CFG_OR6_PRELIM;
- memctl->br6 = CFG_BR6_PRELIM;
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+ memctl->or6 = CONFIG_SYS_OR6_PRELIM;
+ memctl->br6 = CONFIG_SYS_BR6_PRELIM;
#endif
-#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
- memctl->or7 = CFG_OR7_PRELIM;
- memctl->br7 = CFG_BR7_PRELIM;
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+ memctl->or7 = CONFIG_SYS_OR7_PRELIM;
+ memctl->br7 = CONFIG_SYS_BR7_PRELIM;
#endif
#if defined(CONFIG_CPM2)
/* Config QE ioports */
config_qe_ioports();
#endif
+#if defined(CONFIG_MPC8536)
+ fsl_serdes_init();
+#endif
}
int cpu_init_r(void)
{
-#ifdef CONFIG_CLEAR_LAW0
-#ifdef CONFIG_FSL_LAW
- disable_law(0);
-#else
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-
- /* clear alternate boot location LAW (used for sdram, or ddr bank) */
- ecm->lawar0 = 0;
-#endif
-#endif
+ puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
+ volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint svr, ver;
uint l2srbar;
+ u32 l2siz_field;
svr = get_svr();
- ver = SVR_VER(svr);
+ ver = SVR_SOC_VER(svr);
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
+ l2siz_field = (cache_ctl >> 28) & 0x3;
- switch (cache_ctl & 0x30000000) {
- case 0x20000000:
- if (ver == SVR_8548 || ver == SVR_8548_E ||
- ver == SVR_8544 || ver == SVR_8568_E) {
- printf ("L2 cache 512KB:");
- /* set L2E=1, L2I=1, & L2SRAM=0 */
- cache_ctl = 0xc0000000;
+ switch (l2siz_field) {
+ case 0x0:
+ printf(" unknown size (0x%08x)\n", cache_ctl);
+ return -1;
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ puts("128 KB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ cache_ctl = 0xc4000000;
} else {
- printf ("L2 cache 256KB:");
+ puts("256 KB ");
+ cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
+ }
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E) {
+ puts("256 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
cache_ctl = 0xc8000000;
+ } else {
+ puts ("512 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
}
break;
- case 0x10000000:
- printf ("L2 cache 256KB:");
- if (ver == SVR_8544 || ver == SVR_8544_E) {
- cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
- }
+ case 0x3:
+ puts("1024 KB ");
+ /* set L2E=1, L2I=1, & L2SRAM=0 */
+ cache_ctl = 0xc0000000;
break;
- case 0x30000000:
- case 0x00000000:
- default:
- printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
- return -1;
}
if (l2cache->l2ctl & 0x80000000) {
- printf(" already enabled.");
+ puts("already enabled");
l2srbar = l2cache->l2srbar0;
-#ifdef CFG_INIT_L2_ADDR
- if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
- l2srbar = CFG_INIT_L2_ADDR;
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+ if (l2cache->l2ctl & 0x00010000 && l2srbar >= CONFIG_SYS_FLASH_BASE) {
+ l2srbar = CONFIG_SYS_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
- printf(" Moving to 0x%08x", CFG_INIT_L2_ADDR);
+ printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
}
-#endif /* CFG_INIT_L2_ADDR */
+#endif /* CONFIG_SYS_INIT_L2_ADDR */
puts("\n");
} else {
asm("msync;isync");
l2cache->l2ctl = cache_ctl; /* invalidate & enable */
asm("msync;isync");
- printf(" enabled\n");
+ puts("enabled\n");
}
#else
- printf("L2 cache: disabled\n");
+ puts("disabled\n");
#endif
#ifdef CONFIG_QE
- uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */
+ uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
qe_init(qe_base);
qe_reset();
#endif
+#if defined(CONFIG_MP)
+ setup_mp();
+#endif
return 0;
}