#include <asm/cpm_85xx.h>
#include <pci.h>
-#if defined(CONFIG_PCI) && !defined(CONFIG_FSL_PCI_INIT)
+#if !defined(CONFIG_FSL_PCI_INIT)
+
+#ifndef CONFIG_SYS_PCI1_MEM_BUS
+#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI1_IO_BUS
+#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI2_MEM_BUS
+#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI2_IO_BUS
+#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
+#endif
static struct pci_controller *pci_hose;
pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
}
- pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & 0x000fffff;
+ pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
pcix->potear1 = 0x00000000;
pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
pcix->powbear1 = 0x00000000;
pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
- pcix->potar2 = (CONFIG_SYS_PCI1_IO_BASE >> 12) & 0x000fffff;
+ pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
pcix->potear2 = 0x00000000;
pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
pcix->powbear2 = 0x00000000;
pcix->piwar3 = 0;
pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI1_MEM_BASE,
+ CONFIG_SYS_PCI1_MEM_BUS,
CONFIG_SYS_PCI1_MEM_PHYS,
CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI1_IO_BASE,
+ CONFIG_SYS_PCI1_IO_BUS,
CONFIG_SYS_PCI1_IO_PHYS,
CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
*/
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & 0x000fffff;
+ pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
pcix2->potear1 = 0x00000000;
pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
pcix2->powbear1 = 0x00000000;
pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
- pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BASE >> 12) & 0x000fffff;
+ pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
pcix2->potear2 = 0x00000000;
pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
pcix2->powbear2 = 0x00000000;
pcix2->piwar3 = 0;
pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI2_MEM_BASE,
+ CONFIG_SYS_PCI2_MEM_BUS,
CONFIG_SYS_PCI2_MEM_PHYS,
CONFIG_SYS_PCI2_MEM_SIZE,
PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI2_IO_BASE,
+ CONFIG_SYS_PCI2_IO_BUS,
CONFIG_SYS_PCI2_IO_PHYS,
CONFIG_SYS_PCI2_IO_SIZE,
PCI_REGION_IO);
hose->last_busno = pci_hose_scan(hose);
#endif
}
-#endif /* CONFIG_PCI */
+#endif /* !CONFIG_FSL_PCI_INIT */