*
* The processor starts at 0x00000100 and the code is executed
* from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
+ * in memory, but as long we don't jump around before relocating,
* board_init lies at a quite high address and when the cpu has
* jumped there, everything is ok.
* This works because the cpu gives the FLASH (CS0) the whole
* address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
+ * the flash somewhere up there in the memory map.
*
* board_init will change CS0 to be positioned at the correct
* address and (s)dram will be positioned at address 0
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
+ GOT_ENTRY(__init_end)
GOT_ENTRY(_end)
GOT_ENTRY(__bss_start)
-#if defined(CONFIG_FADS) || defined(CONFIG_ICU862)
- GOT_ENTRY(environment)
-#endif
END_GOT
/*
bl board_init_f /* run 1st part of board init code (from Flash) */
-
.globl _start_of_vectors
_start_of_vectors:
/* Alignment exception. */
. = 0x600
Alignment:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
/* Program check exception */
. = 0x700
ProgramCheck:
- EXCEPTION_PROLOG
+ EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
li r20,MSR_KERNEL
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
-
- . = 0xc00
-/*
- * r0 - SYSCALL number
- * r3-... arguments
- */
-SystemCall:
- addis r11,r0,0 /* get functions table addr */
- ori r11,r11,0 /* Note: this code is patched in trap_init */
- addis r12,r0,0 /* get number of functions */
- ori r12,r12,0
-
- cmplw 0, r0, r12
- bge 1f
-
- rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
- add r11,r11,r0
- lwz r11,0(r11)
-
- li r20,0xd00-4 /* Get stack pointer */
- lwz r12,0(r20)
- subi r12,r12,12 /* Adjust stack pointer */
- li r0,0xc00+_end_back-SystemCall
- cmplw 0, r0, r12 /* Check stack overflow */
- bgt 1f
- stw r12,0(r20)
-
- mflr r0
- stw r0,0(r12)
- mfspr r0,SRR0
- stw r0,4(r12)
- mfspr r0,SRR1
- stw r0,8(r12)
-
- li r12,0xc00+_back-SystemCall
- mtlr r12
- mtspr SRR0,r11
-
-1: SYNC
- rfi
-
-_back:
-
- mfmsr r11 /* Disable interrupts */
- li r12,0
- ori r12,r12,MSR_EE
- andc r11,r11,r12
- SYNC /* Some chip revs need this... */
- mtmsr r11
- SYNC
-
- li r12,0xd00-4 /* restore regs */
- lwz r12,0(r12)
-
- lwz r11,0(r12)
- mtlr r11
- lwz r11,4(r12)
- mtspr SRR0,r11
- lwz r11,8(r12)
- mtspr SRR1,r11
-
- addi r12,r12,12 /* Adjust stack pointer */
- li r20,0xd00-4
- stw r12,0(r20)
-
- SYNC
- rfi
-_end_back:
-
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
mr r3, r5 /* Destination Address */
lis r4, CFG_MONITOR_BASE@h /* Source Address */
ori r4, r4, CFG_MONITOR_BASE@l
- lis r5, CFG_MONITOR_LEN@h /* Length in Bytes */
- ori r5, r5, CFG_MONITOR_LEN@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
/*
/*
* Relocation Function, r14 point to got2+0x8000
*
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
*/
li r0,__got2_entries@sectoff@l
la r3,GOT(_GOT2_TABLE_)
bdnz 1b
/*
- * Now adjust the fixups and the pointers to the fixups
+ * Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
*/
2: li r0,__fixup_entries@sectoff@l
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
-#if defined(CONFIG_FADS) || defined(CONFIG_ICU862)
- /*
- * For the FADS - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- */
- lwz r4,GOT(environment)
-#else
lwz r4,GOT(_end)
-#endif
cmplw 0, r3, r4
beq 6f
mr r4, r10 /* Destination Address */
bl board_init_r
- /* Problems accessing "end" in C, so do it here */
- .globl get_endaddr
-get_endaddr:
- lwz r3,GOT(_end)
- blr
-
/*
* Copy exception vector code to low memory
*
lwz r7, GOT(_start)
lwz r8, GOT(_end_of_vectors)
- rlwinm r9, r7, 0, 22, 31 /* _start & 0x3FF */
+ li r9, 0x100 /* reset vector always at 0x100 */
cmplw 0, r7, r8
bgelr /* return if r7>=r8 - just in case */
projects / u-boot / blobdiff